Modification History
This version was released with MST Textiles Clothing and Footwear Training Package Release 3.0.
Release 3. Supersedes and is equivalent to MST40316 Certificate IV in Custom-Made Footwear (Release 2).
9 Elective units updated. Equivalent outcome.
Qualification Description
This qualification provides skills and knowledge to perform technical and production work in the design and development of custom-made footwear or footwear that involves small production quantities.
No occupational licensing or certification requirements exist at the time of publication.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
Total number of units = Twenty-five (25)
- Nine (9) core units of competency
- Sixteen (16) elective units of competency, consisting of:
- at least five (5) units from Group A
- at least three (3) units from Group B
- up to eight (8) units (not previously selected) from Group A, B and/or C
- up to four (4) units from any endorsed Training Package or accredited course where those units are available at Certificate III, Certificate IV or Diploma level. These units must be relevant to the work outcome and not duplicate units available within this qualification.
Core units
Select all eight (8) units of competency from the following list.
|
Unit code |
Unit title |
Prerequisite unit |
|
MSMENV272 |
Participate in environmentally sustainable work practices |
|
|
MSMWHS200 |
Work safely |
|
|
MSS402051 |
Apply quality standards |
|
|
MSTFP2001 |
Identify materials used in footwear production |
|
|
MSTFP4001 |
Develop design for custom-made footwear |
|
|
MSTFP4002 |
Make patterns for custom-made footwear |
|
|
MSTFP4003 |
Prepare, cut and sew custom-made shoe components |
|
|
MSTFP4004 |
Assemble and finish custom-made shoe |
|
|
MSTFP4005 |
Fit custom-made footwear |
Elective Units
Group A
|
Unit code |
Unit title |
Prerequisite unit |
|
MSTFD4003 |
Assist in preparation of preliminary design concepts |
|
|
MSTFD4014 |
Identify influences on contemporary fashion designs and construction techniques |
|
|
MSTGN4015 |
Coordinate or set-up machines for product change |
|
|
MSTGN4002 |
Participate in product engineering |
|
|
MSTGN4005 |
Plan and implement production within a work area |
|
|
MSTGN4007 |
Contribute to the development of products or processes |
|
|
MSTGN4010 |
Implement and monitor WHS and environmental systems in the workplace |
|
|
MSTGN4016 |
Coordinate quality system and procedures |
|
|
MSTGN4012 |
Fabricate or machine tooling |
|
|
MSTMF4001 |
Select and adjust prefabricated footwear-related orthoses |
|
|
MSTMF4002 |
Conduct medical grade footwear assessments for clients with footwear-related medical conditions |
|
|
MSTMF4003 |
Modify medical grade footwear |
|
|
MSTMF4004 |
Select and adjust prefabricated medical grade footwear and accessories |
|
|
MSTMF4005 |
Select, produce and adjust casts for accommodative orthoses |
|
|
MSTMF4006 |
Fit medical grade footwear and orthoses |
|
|
MSTMF4007 |
Produce accommodative orthoses |
|
|
MSTMF4008 |
Produce negative and positive casts for lasts and corrective orthoses |
|
|
MSTMF4009 |
Produce custom-made medical grade footwear |
|
|
MSTMF4010 |
Fit complex custom-made medical grade footwear and orthoses |
|
|
MSTMF4011 |
Produce corrective orthoses |
Group B
|
Unit code |
Unit title |
Prerequisite unit |
|
MSTFP3001 |
Cut leather by hand |
|
|
MSTFP3002 |
Hand last shoe |
|
|
MSTFP3003 |
Assemble shoe by hand |
MSTFP2001 Identify materials used in footwear production |
|
MSTFP3004 |
Contribute to footwear production improvement processes |
MSS402051 Apply quality standards |
|
MSTFP3005 |
Supervise footwear production operations |
|
|
MSTFP3006 |
Apply foot anatomy principles to footwear production |
|
|
MSTGN3013 |
Control production in a section of a TCF enterprise |
|
|
MSTGN3014 |
Organise and plan own work to achieve planned outcomes |
|
|
MSTGN3003 |
Estimate and cost job |
|
|
MSTLG3005 |
Grade leather |
Group C
|
Unit code |
Unit title |
Prerequisite unit |
|
MSMSUP106 |
Work in a team |
|
|
MSTCL3014 |
Interact and communicate with garment production personnel |
|
|
MSTFD3004 |
Draw a trade drawing for fashion design |
|
|
MSTFP2002 |
Perform stuff cutting |
|
|
MSTFP2003 |
Cut printed materials by machine |
|
|
MSTFP2004 |
Cut non-printed leather by machine |
|
|
MSTFP2005 |
Operate machine to sew upper |
|
|
MSTFP2006 |
Machine upper according to product requirements |
MSTFP2005 Operate machine to sew upper |
|
MSTFP2007 |
Last shoe by machine |
|
|
MSTFP2008 |
Perform moulding operations |
|
|
MSTFP2009 |
Perform footwear finishing operations |
|
|
MSTFP2010 |
Repair footwear product |
|
|
MSTFP2011 |
Perform table-based operations |
|
|
MSTGN2005 |
Perform minor maintenance |
|
|
MSTGN2020 |
Perform test or inspection to check product quality |
|
|
MSTGN2021 |
Select, transfer and remove materials and products |
|
|
MSTGN3009 |
Coordinate work of team or section |
|
|
MSTGN2022 |
Perform tasks to support production |
|
|
MSTGN2014 |
Operate computing technology in a TCF workplace |
|
|
MSTGN3006 |
Draw 3-D designs |
|
|
MSTLG2007 |
Skive leather pieces |
Qualification Mapping Information
Release 3. Supersedes and is equivalent to MST40316 Certificate IV in Custom-Made Footwear (Release 2).
Release 2. Supersedes and is equivalent to MST40316 Certificate IV in Custom-Made Footwear (Release 1).
Release 1. Supersedes and is equivalent to LMT40407 Certificate IV in Custom-Made Footwear.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=a203ec5c-de7d-406b-b3e1-8f1a9b76e92e
