Unit of competency details
RIINHB219D - Assist with air drilling (Release 2)
Summary
Companion volumes:
Unit of competency
Assessment requirements
Replaced release
You are currently viewing the components related to release 2.
The current release is release 3.
View release 3 details.
Training packages that include this unit
Qualifications that include this unit
Classifications
Classification history
| ASCED Module/Unit of Competency Field of Education Identifier | 030303 | Mining Engineering | 02/May/2014 | |
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form
Unit of competency
Modification History
Release
|
Comment
|
|
1
|
This unit replaces RIINHB219A Assist with air drilling.
|
|
2
|
Editorial corrections.
|
Application
This unit describes a participant’s skills and knowledge required to assist with air drilling in the Resources and Infrastructure Industries.
This unit is appropriate for those working in drillers assistant roles.
Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Unit Sector
Elements and Performance Criteria
|
1. Plan and prepare for assisting with air drilling
|
1.1 Access, interpret and apply assist with air drilling documentation and ensure the work activity is compliant
1.2 Obtain, read, interpret, clarify and confirm work requirements
1.3 Identify and address potential risks, hazards and environmental issues and implement control measures
1.4 Select and wear appropriate personal protective equipment for work activities
1.5 Communicate and coordinate activities with others throughout the work activity
1.6 Load, unload and move tools and equipment
1.7 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
|
|
2. Support the air drilling process
|
2.1 Fit and remove and measure bits and down-hole tools to/from the drill string
2.2 Prepare drill string in readiness for tripping and drilling
2.3 Sharpen drill bits
2.4 Add and remove drill rod to and from the drill string
2.5 Inspect and maintain drill pipe, bits, threads and other down-hole equipment
2.6 Use pipe and casing handling equipment
2.7 Install and seal casing
2.8 Use, install and maintain stuffing boxes and collar T pieces
|
|
3. Handle samples
|
3.1 Obtain and/or lay out samples as required
3.2 Split, bag, label and store samples for transport
3.3 Clean and service sampling equipment
3.4 Obtain uncontaminated samples using appropriate sampling methods
3.5 Identify safety precautions for handling potentially hazardous samples
3.6 Clear blockages in sample and delivery system
3.7 Note and report possible changes to sample quality due to blockages
|
|
4. Use restraining devices
|
4.1 Fit restraining devices
4.2 Identify dangers of high velocity samples in air drilling and take appropriate measures to minimise hazard
|
|
5. Mix drilling fluids for air/foam drilling
|
5.1 Check labels and read and interpret safety information/ hazard codes
5.2 Mix the drilling fluid
5.3 Store drilling fluid components and additives
|
|
6. Carry out basic maintenance of tools and equipment
|
6.1 Perform inspections and routine checks on ancillary equipment such as air compressor and injection pump
6.2 Perform inspections and basic maintenance of pipe handling equipment
6.3 Select and maintain bit sharpening equipment
6.4 Complete housekeeping activities
6.5 Process records
|
Foundation Skills
Foundation skills essential to performance are explicit in the performance criteria of this unit. Further information is available in the Resources and Infrastructure Industry Training Package Companion Volume.
Unit Mapping Information
RIINHB219A Assist with air drilling
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272
Assessment requirements
Modification History
Release
|
Comment
|
|
1
|
This unit replaces RIINHB219A Assist with air drilling.
|
|
2
|
Editorial corrections.
|
Performance Evidence
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
- locates and applies relevant documentation, policies and procedures
- implements the requirements, procedures and techniques for the safe, effective and efficient assisting with air drilling including:
- operating ancillary equipment
- applying basic maintenance and servicing of auxiliary equipment
- identifying and measuring bits, shrouds and related components
- identifying thread types in use
- applying refuelling procedures for vehicles, drill rigs and ancillary equipment
- identifying and applying correct lubricants
- applying correct handling of samples
- carrying out housekeeping
- disassemble, inspect and reassemble DTH hammers
- install restraining devices to pressure and delivery hoses
- inspection and replacement of inner tubes and sealing devices in RC pipe
- driving vehicles
- complying with basic vehicles cleaning procedures
- works effectively with others to undertake and complete the air drilling tasks that meets all of the required outcomes including:
- complying with written and verbal reporting requirements and procedures
- communicating clearly and concisely with others to receive and clarify work instructions
- communicating clearly and concisely with others to resolve coordination requirements prior to commencing and during work activities
- demonstrates consistent timely completion of assisting with air drilling tasks that safely, effectively and efficiently meet all of the required outcomes on a minimum of one (1) occasion including:
- fitting/removing and measuring bits and down-hole tools to/from the drill string
- preparing drill string in readiness for tripping and drilling
- sharpening drill bits
- adding/removing drill rod to and from the drill string
- inspecting and maintaining drill pipe, bits, threads and other down-hole equipment
- using pipe and casing handling equipment
- installing and sealing casing
- using, installing and maintaining stuffing boxes and collar T pieces
- obtaining uncontaminated samples using appropriate sampling methods
- mix drilling fluids
- fitting restraining devices to pressure and delivery hoses
Knowledge Evidence
The candidate must demonstrate knowledge of the following when assisting with air drilling:
- applying safe work practices and identifying and reporting all potential hazards, risks and environmental issues
- identifying the care of samples including storage and transport
- using safety data sheets (SDS)
- complying with the basic operation of compressors and the need for cleanliness when carrying out compressor maintenance
- identifying the critical need to match threads with threads on tubular components
- preparing for drilling operational requirements and procedures
- complying with the theory behind sharpening bits
- complying with the monitoring of sample quality to restrict contamination
- identifying the importance of the correct measurement of bits and other related components
- understanding the methods for clearing blockages in air or rotary holes
- understanding the methods of clearing blocked sample and delivery hoses
- complying with the requirement of restraining devices on all high pressure and delivery hoses
- identifying the potential hazards with the operation of rod handling devices
- being prepared for fire/accident/emergency
Assessment Conditions
- An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
- this unit must be assessed in the context of this sector’s work environment; and,
- this unit must be assessed using Resources and Infrastructure Industry sector specific policies, procedures, processes and operational manuals; and,
- an assessor must demonstrate the performance evidence, and knowledge evidence as outlined in this Unit of Competency, and through five (5) years of work in the Industry sector; and,
- where a co-assessment or partnership arrangement exists between a qualified assessor and an Industry technical expert, the Industry technical expert can hold the unit being assessed, and/or demonstrate equivalency of skills and knowledge at the unit level. An Industry technical expert must also demonstrate a minimum of three (3) years of continuous work in the Industry sector, with the preceding one (1) year in the unit they are co-assessing.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272
