Modification History
Release |
Comments |
1 |
Replaces RII20909 Certificate II in Drilling Operations. |
2 |
Superseded imported units updated. |
3 |
Editorial corrections. |
4 |
Corrected modification history. |
Qualification Description
This qualification reflects the role of employees such as drillers’ assistants who undertake a prescribed range of functions involving known routines and procedures and who take some responsibility for the quality of work outcomes.
Licensing, legislative, regulatory and certification requirements that apply to this qualification can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the qualification.
Entry Requirements
There are no entry requirements for this Qualification.
Packaging Rules
Requirements for completion of the qualification
The following provides the packaging rules for this qualification, followed by the list of relevant units of competency.
Successful completion of twelve (12) units of competency made up of:
- eight (8) core units, and
- four (4) elective units of which:
- at least one (1) must be chosen from the group A
- up to three (3) may be chosen from group B and/or group C
- up to one (1) may be chosen from Certificate II or Certificate III level from this, or any other Training Package or accredited course
Units chosen must be relevant to the job function.
There are both licensed and non-licensed units of competency relating to high risk work in the Resources and Infrastructure Industry Training Package. To be appointed under any statutory requirements in related roles, units of competency should be selected to meet the state/territory licensing requirements.
There are no prerequisites to imported units listed in this qualification. Where a unit is imported as an elective care must be taken to ensure that all prerequisites specified are complied with.
Core units of competency |
|
Unit code |
Unit title |
BSBWOR203B |
Work effectively with others |
RIICOM201D |
Communicate in the workplace |
RIIENV201D |
Identify and assess environmental and heritage concerns |
RIINHB201D |
Load, secure and unload drilling equipment and materials |
RIINHB202D |
Set up/pack up drill site |
RIINHB203D |
Support drilling process |
RIIWHS201D |
Work safely and follow WHS policies and procedures |
RIIRIS201D |
Conduct local risk control |
Electives |
|
Group A |
|
Unit code |
Unit title |
RIINHB205D |
Assist continuous flight auger drilling |
RIINHB206D |
Assist large diameter auger drilling |
RIINHB208D |
Assist diamond core drilling |
RIINHB209D |
Assist guided boring |
RIINHB210D |
Assist surface directional drilling |
RIINHB211D |
Assist mud rotary boring |
RIINHB213D |
Assist cable tool drilling |
RIINHB216D |
Assist underground in-seam directional drilling |
RIINHB217D |
Assist horizontal direction drilling |
RIINHB218D |
Assist grouting or cementing operations |
RIINHB219D |
Assist with air drilling |
Group B |
|
Unit code |
Unit title |
HLTAID003 |
Provide first aid |
RIIERR202D |
Contribute to the control of emergencies and critical situations |
RIIHAN201D |
Operate a forklift |
RIIHAN206D |
Transport plant, equipment and personnel |
RIIHAN208D |
Perform dogging |
RIIHAN213D |
Work effectively in the drilling industry |
RIIHAN307D |
Operate a vehicle loading crane |
RIIOGD205D |
Support blow out prevention operations |
RIIOGD206D |
Assist with coal seam gas control |
RIIWHS204D |
Work safely at heights |
RIIQUA201D |
Maintain and monitor site quality standards |
RIIRIS202D |
Respond to site based spills |
RIISAM202D |
Isolate and access plant |
RIISAM205D |
Cut, weld and bend materials |
RIIVEH203D |
Operate light vehicle underground |
RIISTD202D |
Collect routine site samples |
RIIUND206D |
Install hand held underground ground support |
RIIVEH201D |
Operate light vehicle |
RIIVEH305D |
Operate and maintain a four wheel drive vehicle |
Group C |
|
Unit Code |
Unit Title |
CPCCLDG3001A |
Licence to perform dogging |
TLILIC2001A |
Licence to operate a forklift truck |
Qualification Mapping Information
No equivalent qualification.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272