Modification History
Not applicable.
Unit Descriptor
Unit descriptor |
This unit covers the skills and knowledge required to add reinforcing materials and attachments to canvas and sail products. |
Application of the Unit
Application of the Unit |
This unit applies to the addition of accessories, attachments and reinforcement. Work may be conducted in a variety of environments, such as:
Work may be conducted in small to large scale enterprises and may involve individual and team activities. Work is performed within defined procedures under direct supervision. The application of this unit is according to OHS practices of the enterprise and workplace practices, which may include:
This unit requires the application of skills associated with problem solving and planning and organising to identify and determine appropriate reinforcements and attachments, as well as an application of knowledge of technology used in canvas or sail making. This unit also requires the ability to interpret and complete job information, check quality and identify and communicate operational problems. Self management skills are applied to ensure workplace and quality standards are achieved. |
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
Prerequisites |
Employability Skills Information
Employability Skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Not applicable.
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1 Select procedures and plan the work |
1.1 Required accessories, attachments and reinforcements, and nature of the materials involved are ascertained from work instructions 1.2 Appropriate procedures for adding the accessories, attachments and reinforcements are ascertained from work instructions 1.3 Work is sequenced to maximise safety and productivity 1.4 Workplace procedures and instructions are read and interpreted |
2 Prepare work area, set out work piece and prepare items to be added |
2.1 Safe working environment is established 2.2 Suitable electrical power outlets are identified, if required 2.3 Work piece is set out 2.4 Assistance in handling the work piece is obtained, if necessary |
3 Select, use and store tools |
3.1 Appropriate hand and power tools are selected for the job 3.2 Tools are examined for damage, missing components or other defects (including frayed power cords where applicable) 3.3 Extension power cables are checked for knots and insulation damage 3.4 Electrical tools are connected safely to power supply 3.5 Safety equipment is used during tool operation in accordance with OHS practices 3.6 Required tasks are performed using tools in accordance with OHS practices 3.7 Tools are located in a safe position when not in use 3.8 Tools and extension cords are cleaned and stored in accordance with industry and workplace OHS practices |
4 Mark out work piece for addition of required items |
4.1 Items to be added are obtained, checked for correct features and operation, and prepared for fitting or attachment 4.2 Datum points are located in accordance with work instructions 4.3 Locations of accessories, attachments, reinforcements or openings are marked out on the work piece in accordance with work instructions |
5 Fit accessories |
5.1 Items are inserted or fitted in accordance with workplace requirements, customer requirements and accepted industry practice 5.2 Simple reinforcements, gussets and corner pieces are stitched, riveted, welded or attached by other appropriate means 5.3 Zippers, straps, buckles, eyelets, shorteners, lugs, webbing, velcro tags are inserted or attached 5.4 Knowledge of fitting accessories and attachment processes are applied to perform required tasks |
6 Inspect quality, labelling and documentation |
6.1 Completed work is informally inspected to check that it appears to be of an acceptable standard 6.2 Rework is performed or other appropriate action arranged 6.3 Completed product is labelled or tagged and any necessary documentation completed in accordance with workplace practices |
7 Clean up and maintain equipment |
7.1 Work area is cleaned and tools and equipment are stored away 7.2 Maintenance which is within the province of the operator is performed 7.3 Supervisor is informed of any abnormal conditions needing maintenance or repair |
Required Skills and Knowledge
This describes the essential skills and knowledge and their level required for this unit. |
Demonstrates knowledge of:
|
Demonstrates skills to:
|
Evidence Guide
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package. |
|
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
Demonstrates skills and knowledge to:
Consistently applies skills and knowledge when:
|
Context and specific resources for assessment |
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment, and to information on workplace practices and OHS practices. |
Guidance information for assessment |
This unit may be assessed independently or in combination with other relevant units. |
Range Statement
RANGE STATEMENT The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts. |
||
Legislative/regulatory requirements |
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements. |
|
Power tools may include |
|
|
Tools may include |
|
|
OHS practices |
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
|
Unit Sector(s)
Sector |
Textile Fabrication |