Qualification details

LMT30407 - Certificate III in Textile Fabrication (Release 2)

Summary

Releases:
ReleaseStatusRelease date
2 (this release)Current 27/Jun/2012
(View details for release 1) Replaced16/Jul/2011

Usage recommendation:
Superseded
Mapping:
MappingNotesDate
Is superseded by and equivalent to MST30216 - Certificate III in Manufactured Textile ProductsSupersedes and is equivalent to LMT30407 Certificate III in Textile Fabrication 03/Jul/2016

Training packages that include this qualification

Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnEssential
AHCLSC308A - Install metal structures and featuresInstall metal structures and features N/A
CPCCCM2002A - Carry out excavationCarry out excavation N/A
CPCCCO2013A - Carry out concreting to simple formsCarry out concreting to simple forms N/A
CPCCOHS2001A - Apply OHS requirements, policies and procedures in the construction industryApply OHS requirements, policies and procedures in the construction industry N/A
LMTCL2001B - Use a sewing machineUse a sewing machine N/A
LMTGN2001B - Follow defined OHS policies and proceduresFollow defined OHS policies and procedures N/A
LMTGN2002B - Apply quality standardsApply quality standards N/A
LMTGN2003B - Work in the Textiles, Clothing and Footwear industryWork in the Textiles, Clothing and Footwear industry N/A
LMTGN2004B - Work in a team environmentWork in a team environment N/A
LMTGN2005B - Perform minor maintenancePerform minor maintenance N/A
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 74

Classifications

SchemeCodeClassification value
ANZSCO Identifier 393111 Canvas Goods Fabricator  
ASCO (occupation type) Identifier 4944-13 Canvas Goods Maker 
ASCED Qualification/Course Field of Education Identifier 0301 Manufacturing Engineering And Technology 
Qualification/Course Level of Education Identifier 514 Certificate III 
Taxonomy - Industry Sector N/A Textiles 
Taxonomy - Occupation N/A Sailmaker,Textiles Fabricator 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 393111 Canvas Goods Fabricator  23/Oct/2008 
ASCO (occupation type) Identifier 4944-13 Canvas Goods Maker 23/Oct/2008 
ASCED Qualification/Course Field of Education Identifier 0301 Manufacturing Engineering And Technology 23/Oct/2008 
Qualification/Course Level of Education Identifier 514 Certificate III 28/Jul/2010 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release 2 - imported units updated to current versions, outcomes equivalent.

Description

Job roles /employment outcomes 

The Certificate III reflects vocational outcomes for those performing supervision roles, specialised technical tasks or multi-skilled roles within a production environment.

Application 

This qualification is typically used to develop skill and knowledge in the application of specialised technical, operational and supervisory skills within textile fabrication enterprises.

Pathways Information

Pathways into the qualification 

Direct entry into this qualification requires completion of a total of nineteen (19) units of competency according to the rules described below.

Credit may be granted towards this qualification by those who have completed LMT20507 Certificate II in Textile Fabrication or achieved equivalent industry experience.

Pathways from the qualification 

Further training pathways from this qualification include LMT40107 Certificate IV in Textile Technology and Production, MSA41108 Certificate IV in Competitive Manufacturing, or other relevant manufacturing qualifications.

Licensing/Regulatory Information

There are no specific licences that relate to this qualification. However, some units in this qualification may have licensing or regulatory requirements in some environments. Local regulations should be checked for details.

Entry Requirements

Not applicable.

Employability Skills Summary

EMPLOYABILITY SKILLS QUALIFICATION SUMMARY 

Employability Skills Summary  - Certificate III in Textile Fabrication 

The following table contains a summary of the Employability Skills as identified by the Textile Fabrication industries for this qualification. This table should be interpreted in conjunction with the detailed requirements of each unit of competency packaged in this qualification. The outcomes described here are broad industry requirements that reflect skill requirements for this level.

Employability Skill 

Industry /enterprise requirements for this qualification include :

Communication 

  • communicate verbally with internal and external clients
  • complete written documents, job cards, forms, timesheets and quotations
  • use communication technologies efficiently
  • communicate production abnormalities
  • develop work instructions, visuals and signs
  • demonstrate effective and appropriate communication and interpersonal skills when dealing with people from a range of backgrounds
  • read, interpret and communicate production schedules
  • communicate with all team members
  • use appropriate barriers and signs
  • perform measurements and calculations to determine work requirements

Teamwork 

  • work cooperatively with people of different ages, gender, race or religion
  • liaise with and provide support to other team members
  • work independently or as part of a team
  • keep team members informed of changes to work practices
  • identify team performance required to meet customer needs
  • provide leadership to others in the team
  • encourage the sharing of information between team members
  • plan and support team activities

Problem-solving 

  • identify and report problems and make contributions to their solution
  • investigate problem causes
  • implement changes
  • examine tools for damage, missing components or other defects
  • identify and promptly address problems or issues
  • assess quality of work pieces
  • determine effective work practices
  • provide problem solving support to team members
  • identify and report potential environmental hazards

Initiative and enterprise 

  • seek and provide feedback on procedures
  • gather and analyse information
  • record information on the quality and other indicators of production performance
  • adjust and implement production schedules changes
  • provide leadership
  • identify and implement process improvements
  • coordinate work activities and manufacturing processes
  • monitor workplace performance
  • use analytical and decision making skills

Planning and organising 

  • identify hazards and implement appropriate hazard control measures
  • organise self and others to meet production schedules
  • identify and rectify stock shortages in advance
  • sequence work to maximise safety and productivity
  • select and use appropriate hand and power tools
  • identify labour requirements to achieve product manufacture and perform required services
  • monitor resource use in own work
  • determine materials, chemicals, quality and production requirements
  • apply time management skills to ensure work flow

Self-management 

  • interpret and apply relevant acts and regulations
  • keep the work area clean and tidy at all times
  • conduct regular housekeeping activities
  • understand own work activities
  • manage own time
  • develop and implement workplace procedures and instructions
  • locate, interpret and apply information relevant to own work
  • establish own work schedule
  • monitor and evaluate own work quality
  • conduct work in a manner which minimises waste
  • accept responsibility for quality of work

Learning 

  • develop learning activities as appropriate
  • assess competencies in meeting job requirements
  • identify own training needs and seek skill development if required
  • listen to feedback from others
  • identify sources of information to expand knowledge and understanding
  • identify and address skill development needs of others in the team

Technology 

  • use software applications effectively
  • properly start up, operate and shut down computers
  • work with technology safely and according to workplace standards
  • establish procedures
  • carry out pre-operational checks on equipment and machines
  • operate equipment and machines safely, efficiently and to productivity requirements
  • monitor and adjust machine functions
  • perform minor maintenance
  • clean and check equipment and machines

Packaging Rules

To be awarded the Certificate III in Textile Fabrication, competency must be achieved in nineteen (19) units of competency.

  • Nine (9) core units of competency
  • Ten (10) elective units of competency as specified below.

If Certificate II has been achieved, an additional six (6) units are required. All core units listed must be achieved - any Certificate III core units not achieved at Certificate II must be completed as part of the additional six (6) unit required for the Certificate III. Units that have been credited towards lower level qualifications must not be selected in the additional six (6) unit requirement. A minimum of three (3) of the six (6) units must be selected from Groups A or B.

Note: Where prerequisite units apply, these have been noted, and must be considered in the total number of units.

CORE UNITS 

Complete all nine (9) units from this list

Unit code 

Unit title 

LMTGN2001B

Follow defined OH&S policies and procedures

LMTGN2002B

Apply quality standards

LMTGN2003B

Work in the Textiles, Clothing and Footwear industry

LMTGN3002B

Organise and plan own work to achieve planned outcomes

LMTTF2005A

Translate information into measurements or diagrams

LMTTF2006A

Measure and scale geometric shapes

LMTTF2009A

Identify and select canvas and sail materials

LMTTF2018A

Use canvas and sail production tools

MSAENV272B

Participate in environmentally sustainable work practices

ELECTIVE UNITS 

Select ten (10) units as specified below.

  • A minimum of two (2) units must be selected from Group A
  • A minimum of two (2) units must be selected from Group B
  • A minimum of two (2) units must be selected from Group C
  • A maximum of two (2) units may be selected from Group E
  • A maximum of three (3) units may be selected from Group F
  • The remainder must be selected from Groups A, B and C.

NOTE: Competitive Manufacturing Training Package units, identified in Group E as MSACM coded units, should be selected on the basis of work requirements. Those at Certificate II level (units in the 200 series) are appropriate for operators. MSACM units for those in Certificate III level positions such as team leaders should be selected from both the 200 series and the 400 series.

GROUP A 

Unit code 

Unit title 

Prerequisites 

LMTTF3001A

Identify customer requirements (on site)

LMTTF3002A

Gain customer acceptance of service proposal

LMTTF3003A

Produce patterns for 3D products

LMTTF2007A

LMTTF3004A

Perform advanced welding of plastic materials

LMTTF2014A

LMTTF3005A

Apply lofting skills to sail making

LMTTF3006A

Cut and join sail panels

GROUP B 

Unit code 

Unit title 

Prerequisites 

LMTGN3001B

Control production in a section of a Textiles, Clothing and Footwear enterprise

LMTGN3003B

Estimate and cost job

LMTGN3005B

Plan tasks to assist production operations

LMTLG3001A

Make a prototype

LMTTF3001A

Identify customer requirements (on site)

LMTTF3002A

Gain customer acceptance

LMTTF3003A

Produce patterns for 3D products

LMTTF2007A

LMTTF3004A

Perform advanced welding of plastic materials

LMTTF2014A

LMTTF3005A

Apply lofting skills to sail making

LMTTF3006A

Cut and join sail panels

GROUP C 

Unit code 

Unit title 

Prerequisites 

LMTTF2001A

Despatch products

LMTTF2003A

Package and handle products for despatch

LMTTF2004A

Add reinforcements and attachments

LMTTF2007A

Produce patterns for 2D products

LMTTF2008A

Use adhesives

LMTTF2010A

Lay out and mark out canvas or sail materials

LMTTF2011A

Cut and shape canvas or sail materials

LMTTF2012A

Stitch by hand

LMTTF2013A

Waterproof canvas product

LMTTF2014A

Weld plastic materials

LMTTF2016A

Install products on and off-site

LMTTF2017A

Cut, bend and shape metal

LMTTF2019A

Inspect canvas or sail product

GROUP D 

Unit code 

Unit title 

Prerequisites 

CPCCOHS2001A

Apply OHS requirements, policies and procedures in the construction industry

CPCCCM2002A

Carry out excavation

*

CPCCCO2013A

Carry out concreting to simple forms

*

LMTCL2001B

Use a sewing machine

LMTGN2004B

Work in a team environment

LMTGN2005B

Perform minor maintenance

LMTGN2008B

Coordinate work of team or section

LMTGN2009B

Operate computing technology in a Textiles, Clothing and Footwear workplace

LMTGN2010B

Perform tasks to support production

LMTLG2006A

Identify materials used in leather goods production

LMTTX2012B

Perform industrial sewing on textile products

MEM05012C

Perform routine manual metal arc welding

MEM05050B

Perform routine gas metal arc welding

AHCLSC308A

Install metal structures and features

GROUP E 

Unit code 

Unit title 

Prerequisites 

MSS402010A

Manage the impact of change on own work

MSS403010A

Facilitate change in an organisation implementing competitive systems and practices

MSS402001A

Apply competitive systems and practices

MSS402002A

Sustain process improvements

MSS403001A

Implement competitive systems and practices

MSS403002A

Ensure process improvements are sustained

MSS402020A

Apply quick changeover procedures

MSS402021A

Apply Just in Time procedures

MSS402030A

Apply cost factors to work practices

MSS402031A

Interpret product costs in terms of customer requirements

MSS402040A

Apply 5S procedures

MSS402050A

Monitor process capability

MSS402060A

Use planning software systems in operations

MSS402061A

Use SCADA systems in operations

MSACMT270A

Use sustainable energy practices

MSS402080A

Undertake root cause analysis

MSS402081A

Contribute to the application of a proactive maintenance strategy

MSS403021A

Facilitate a Just in Time system

MSS403030A

Improve cost factors in work practices

MSS403032A

Analyse manual handling processes

MSS403040A

Facilitate and improve implementation of 5S

MSS404050A

Undertake process capability improvements

*

MSS403051A

Mistake proof an operational process

MSS404052A

Apply statistics to operational processes

MSS404060A

Facilitate the use of planning software systems in a work area or team

MSS404061A

Facilitate the use of SCADA systems in a team or work area

MSS404081A

Undertake proactive maintenance analyses

MSS404082A

Assist in implementing a proactive maintenance strategy

GROUP F 

Other Textile Fabrication units that are available at Certificates II (maximum 1 unit) and III (maximum 3 units)

Other TCF Training Package units that are available at Certificates II (maximum 1 unit), III (maximum 3 units) and IV (maximum 1 unit)

Units from other endorsed Training Packages and accredited courses that are available at Certificates II (maximum 1 unit), III (maximum 3 units) and IV (maximum 1 unit)

Training component details
The following details are displayed for each different NRT:-

Training packages

- Training package details
- Training package components

Qualifications

- Qualification details
- Qualification components

Accredited courses

- Accredited course details

Modules

- Module details

Units of competency

- Units of competency details
- Unit components

Skill sets

- Skill set details
- Skill set components

Click on the Export link to export the NRT information to MS Word or PDF.

Click on the Manage notification link to create or change a notification for this NRT.

When selecting the Display history check box a set of tables will appear displaying a log of historical values describing what has changed and when over time.

If you have access to make changes to an NRT, click on the Edit link on the upper right hand side of the summary box.