Unit of competency
Modification History
Release |
Comment |
1 |
Replaces equivalent unit FPICOT2203B Finish products, which was first released with FPI05 Forest and Forest Products Training Package Version 3. This is the first release of this unit in the new standards format. |
Application
This unit of competency specifies the outcomes required to set up and conduct the finishing process and pack products. The unit includes machining and manually or machine coating products.
The unit applies to timber manufacturing and production workers that coat and package products to complete finishing operations in a forest products factory setting.
No licensing or certification requirements apply to this unit at the time of publication.
Pre-requisite Unit
Nil
Unit Sector
Sawmilling and Processing
Timber Manufactured Products
Wood Panel Products
Elements and Performance Criteria
ELEMENTS |
PERFORMANCE CRITERIA |
Elements describe the essential outcomes. |
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions. |
1. Set up production processes |
1.1 Identify products, processes and production requirements in line with work order and site procedures. 1.2 Prepare to work safely according to workplace work health and safety (WHS) requirements. 1.3 Inspect equipment, tools and materials for operational effectiveness in line with manufacturer recommendations and site procedures. 1.4 Conduct test run, by machining sample material in line with set-up processes and site requirements. 1.5 Inspect machined product for faults and alter setup to rectify identified problems. |
2. Conduct finishing operations |
2.1 Measure and mark material for processing in line with work order and in consultation with appropriate personnel. 2.2 Machine material and identify, remove and repair or dispose of defects in line with site procedures. 2.3 Identify, investigate and resolve equipment faults and routine problems, as required. 2.4 Clear work area and dispose of waste material in line with relevant environmental policies and procedures. |
3. Coat products |
3.1 Identify and plan coating requirements and select coat in line with site procedures. 3.2 Prepare coating area to provide suitable clean area that minimises surface defects during drying, in line with site procedures. 3.3 Open, decant and mix coat in line with manufacturer recommendations and safe work procedure. 3.4 Apply coat according to planned method and sequence in line with manufacturer recommendations and site standards. 3.5 Assess coat regularly to identify and remove faults in line with site standards. 3.6 Dispose of products with coat faults in line with site procedures and environmental requirements. 3.7 Clear work area, store materials and dispose of chemical waste according to site procedures and environmental protection requirements. |
4. Pack finished products |
4.1 Check finished products for faults and conformance, and segregate and store in line with workplace procedure and environmental requirements. 4.2 Interpret packing requirements from work order and other relevant documentation. 4.3 Pack finished products in line with site procedures and work orders, using suitable packing materials. 4.4 Record packaged products in line with site procedures. 4.5 Record and report finishing process to appropriate personnel. |
Foundation Skills
FOUNDATION SKILLS |
|
This section describes those core and employment skills that are essential to performance and are not explicit in the performance criteria. |
|
Numeracy skills to: |
|
Oral communication skills to: |
|
Reading skills to: |
|
Writing skills to: |
|
Planning and organising skills to: |
|
Problem solving skills to: |
|
Tecnology skills to: |
|
Range of Conditions
Not Applicable
Unit Mapping Information
FPICOT2203B Finish products
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=0d96fe23-5747-4c01-9d6f-3509ff8d3d47