^

 
 

Qualification details

FWP20416 - Certificate II in Wood Panel Products (Release 4)

Summary

Usage recommendation:
Deleted
The Deleted usage recommendation was implemented on 13 June 2017 to describe training components that have no replacement. Enrolments in training components and statements of attainment or qualifications issued before 13 June 2017 are valid. For any components marked as deleted after 13 June 2017, the applicable transition/teach-out periods apply. For specific questions regarding the enrolment, delivery or issuance of a statement of attainment/qualification, please contact your training regulator.
Mapping:
MappingNotesDate
DeletedDeleted from FWP Forest and Wood Products Training Package11/Feb/2021
Supersedes and is equivalent to FPI20411 - Certificate II in Wood Panel Products12/May/2016

Releases:
ReleaseRelease date
4 (this release) 04/Dec/2020
(View details for release 3) 31/Jan/2020
(View details for release 2) 21/Feb/2018
(View details for release 1) 13/May/2016


Units of competency

CodeSort Table listing Units of Competency by the Code columnTitleSort Table listing Units of Competency by the Title columnEssentialSort Table listing Units of Competency by the Essential column
FWPCOT3320 - Build and maintain timber stacksBuild and maintain timber stacksElective
FWPCOT2206 - Stack and bind materialStack and bind materialElective
MEM18011 - Shut down and isolate machines/equipmentShut down and isolate machines/equipmentElective
MEM16006 - Organise and communicate informationOrganise and communicate informationElective
FWPCOT2254 - Maintain chainsawsMaintain chainsawsElective
FWPCOT2247 - Appearance grade softwood sawn and milled productsAppearance grade softwood sawn and milled productsElective
FWPWPP2203 - Repair veneer and plyRepair veneer and plyElective
TLID2004 - Load and unload goods/cargoLoad and unload goods/cargoElective
FWPCOR2201 - Work effectively in the forest and forest products industryWork effectively in the forest and forest products industryCore
FWPWPP2204 - Repair veneer mechanicallyRepair veneer mechanicallyElective
Items per page 10 | 20 | 50 | 100
Displaying items 1 - 10 of 56

Classifications

SchemeCodeClassification value
ANZSCO Identifier 839413 Wood And Wood Products Factory Worker 
ASCED Qualification/Course Field of Education Identifier 0301 Manufacturing Engineering And Technology 
Qualification/Course Level of Education Identifier 521 Certificate II 
Taxonomy - Industry Sector N/A Timber Manufacturing 
Taxonomy - Occupation N/A Board Production Technician,Production Worker (Panel and Board),Production Worker (Wood Veneer),Production Technician (Panel and Board) 

Classification history

SchemeCodeClassification valueStart dateEnd date
ANZSCO Identifier 839413 Wood And Wood Products Factory Worker 14/Oct/2016 
ASCED Qualification/Course Field of Education Identifier 0301 Manufacturing Engineering And Technology 14/Oct/2016 
Qualification/Course Level of Education Identifier 521 Certificate II 13/May/2016 
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form

Modification History

Release

Comments

Release 4

This version released with FWP Forest and Wood Products Training Package Version 6.0.

Release 3

This version released with FWP Forest and Wood Products Training Package Version 5.0.

Release 2

This version released with FWP Forest and Wood Products Training Package Version 3.0.

Release 1

This version released with FWP Forest and Wood Products Training Package Version 2.0.

Qualification Description

This qualification is designed for job roles in the wood panel products sector of the forest and forest products industry.

This qualification has three employment pathways for typical operational environments of wood panel products. These are:

  • Production Worker (Laminates)
  • Production Worker (Panel and Board)
  • Production Worker (Veneer)

Some imported units in the elective bank may be subject to licensing, legislative, regulatory, or certification requirements. These units must be implemented in line with the licensing requirements outlined in the unit’s parent Training Package.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

To achieve this qualification, competency must be demonstrated in:

  • 13 units of competency:
  • 5 core units plus
  • 8 elective units.

Elective units must ensure the integrity of the qualification’s Australian Qualification Framework (AQF) alignment and contribute to a valid, industry-supported vocational outcome. The electives are to be chosen as follows:

  • 3 from Group A electives listed below
  • 5 from Group A and/or Group B electives listed below, the total of which can include up to 2 units recommended for packaging at Certificate I, II or III level from this or any other endorsed Training Package or state/territory accredited course.

Core Units

FWPCOR2201

Work effectively in the forest and forest products industry

FWPCOR2202

Communicate and interact effectively in the workplace

FWPCOR2203

Follow environmental care procedures

FWPCOR2205

Follow WHS policies and procedures

FWPCOR2207

Maintain quality and product care

Elective Units

An asterisk (*) next to the unit code indicates that there are prerequisite requirements which must be met when packaging the qualification. Please refer to the Prerequisite requirements table for details.

Group A

Logyard and/or Material Preparation

FWPCOT2226

Debark logs mechanically

FWPCOT2263

Cross cut materials with a fixed saw

Veneer/Board Production

FWPCOT2202

Rack material

FWPCOT2243

Tail out timber product and waste material

FWPCOT2244

Operate and maintain a thicknesser

FWPCOT2262

Cut material to shape using a saw

FWPWPP2202

Surface treat raw board

FWPWPP2203

Repair veneer and ply

FWPWPP2204

Repair veneer mechanically

FWPWPP2206

Prepare veneer for ply

FWPWPP2207

Scarf edges of veneer

FWPWPP2208

Cut veneer

FWPWPP2209

Saw products from continuous ply

FWPWPP2212

Cut panels to profile

FWPWPP2213

Cut panels

Lamination and Finishing 

FWPCOT2203

Finish and pack products

FWPCOT2222

Produce laminated beams

FWPCOT2252

Band edges of panels

FWPCOT2258

Assemble products

Grading and Testing

FWPCOT2225

Chip or flake wood

FWPCOT2247

Appearance grade softwood sawn and milled products

Woodchipping

FWPWPP2205

Prepare chip or fibre blends

Group B

Warehousing and Distribution

FWPCOT2206

Stack and bind material

FWPCOT2231

Pack products

FWPCOT2255

Store materials

FWPCOT2260

Tally material

FWPCOT2261

Process orders and prepare for despatch

FWPCOT3320

Build and maintain timber stacks

TLIF1002

Conduct housekeeping activities

Load Handling

AHCMOM207

Conduct front-end loader operations

FWPWPP2211

Move material by transfer equipment

TLID0006

Move materials mechanically using automated equipment

TLID1001

Shift materials safely using manual handling methods

TLID2004

Load and unload goods/cargo

TLID2010

Operate a forklift

TLID2047

Prepare cargo for transfer with slings

TLILIC0003

Licence to operate a forklift truck

Machinery and Equipment

FWPCOT2240

Cut material with a pole saw

FWPCOT2254

Maintain chainsaws

FWPCOT2257

Use hand-held tools

MEM11011*

Undertake manual handling

MEM18011*

Shut down and isolate machines/equipment

Safety and Quality Processes

FWPCOT3263

Maintain and contribute to energy efficiency

HLTAID011

Provide First Aid

MEM13015

Work safely and effectively in manufacturing and engineering

Administration and Business

BSBINS201

Process and maintain workplace information

BSBTEC201

Use business software applications

Competitive Manufacturing

MSS402001

Apply competitive systems and practices

Communication and Relationships

FWPCOT3302

Access and provide timber and wood product information

MEM16006*

Organise and communicate information

SIRXCEG001

Engage the customer

Prerequisite requirements

Units listed in the Prerequisite requirement column that have their own prerequisite requirements are shown with an asterisk (*)

Unit of competency

Prerequisite requirement

MEM11011 Undertake manual handling

MEM13015 Work safely and effectively in manufacturing and engineering

MEM16006 Organise and communicate information*

MEM16006 Organise and communicate information

MEM13015 Work safely and effectively in manufacturing and engineering

MEM18011 Shut down and isolate machines/equipment

MEM11011 Undertake manual handling*

MEM13015 Work safely and effectively in manufacturing and engineering

MEM16006 Organise and communicate information*

Qualification Mapping Information

Code and title current version

Code and title previous version

Comments

Equivalence status

FWP20416 Certificate II in Wood Panel Products Release 4

FWP20416 Certificate II in Wood Panel Products Release 3

Updated to include revised FWP elective units

Equivalent

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=0d96fe23-5747-4c01-9d6f-3509ff8d3d47