Unit of competency
Modification History
Release 3. Assessment Conditions clarified in relation to simulation being an assessment option. |
Release 2. Modifications made to Foundation Skills and Assessment Conditions. |
Release 1. This unit was released in DEF Defence Training Package release 1.0 and meets the Standards for Training Packages. This unit supersedes and is equivalent to DEFEO800A Prepare proof firing points.
|
Application
This unit describes the skills required to prepare proof, trial and experimental firing points to support proof, experimental and trial testing of munitions and weapon systems. The practitioner is responsible for ensuring the available firing point technologies and equipment best meet the design outcomes of the required test. This unit was developed for personnel who are firing point specialists working within proof, experimental and trials organisations or original equipment manufacturers, but is applicable to any individual in this field of work. The skills and knowledge described in this unit must be applied within the legislative, regulatory and policy environment in which they are carried out. Organisational policies and procedures must be consulted and adhered to. Those undertaking this unit would work independently as part of a team under indirect supervision, use discretion and judgement, and take responsibility for the quality of their output. They would perform routine tasks in known contexts. No licensing, legislative or certification requirements apply to unit at the time of publication. |
Pre-requisite Unit
Not applicable. |
Competency Field
Explosive Ordnance |
Unit Sector
Not applicable. |
Elements and Performance Criteria
ELEMENTS |
PERFORMANCE CRITERIA |
||
Elements describe the essential outcomes. |
Performance criteria describe the performance needed to demonstrate achievement of the element. |
||
1 |
Prepare for proof, trial and experimental firing |
1.1 |
Read and clarify proof, trial and experimental instructions |
1.2 |
Identify and apply relevant range regulations |
||
1.3 |
Identify and resource required stores and equipment and check for calibration, serviceability and safety |
||
1.4 |
Liaise with relevant parties |
||
1.5 |
Obtain agreement on firing point preparation in consultation with stakeholders |
||
2 |
Establish firing point |
2.1 |
Install equipment in accordance with the proof, trial and experimental instruction |
2.2 |
Monitor installation of data acquisition equipment |
||
2.3 |
Check safety traces against the set-up |
||
2.4 |
Check functionality of equipment and record identification data, condition and calibration |
||
3 |
Monitor firing point equipment |
3.1 |
Monitor performance of equipment |
3.2 |
Document performance of equipment |
||
4 |
Recondition firing point |
4.1 |
Undertake safety checks |
4.2 |
Confirm and record equipment calibration |
||
4.3 |
Record and report equipment condition |
||
4.4 |
Recondition firing point |
Foundation Skills
Foundation skills essential to performance are explicit in the performance criteria of this unit of competency. |
Range of Conditions
Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the Companion Volume Implementation Guide. |
Unit Mapping Information
This unit supersedes and is equivalent to DEFEO800A Prepare proof firing points. |
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=6bdbab1e-11ed-4bc9-9cba-9e1a55d4e4a9