Modification History
Not applicable.
Unit Descriptor
Unit Descriptor |
1) Scope: |
1.1) Descriptor |
|
This unit covers integrating security components to form a complex security system across multiple sites with multiple and related subsystems and remote monitoring and control. It encompasses applying knowledge of security scenarios and security network standards and protocols, selecting network topology and physical media, disaster recovery planning, performance management and negotiating with clients and others and documenting design. |
Application of the Unit
Application of the Unit |
2) |
This unit is intended for competency development entry-level employment based programs incorporated in approved contracts of training or approved training programs. It is intended to apply to any formal recognition for this standard at the aligned AQF 5 level or higher. |
Licensing/Regulatory Information
License to practice |
3) |
The skills and knowledge described in this unit do not require a license to practice in the workplace. However, practice in this unit is subject to regulations directly related to occupational health and safety and where applicable contracts of training such as apprenticeships. |
Pre-Requisites
Prerequisite Unit(s) |
4) |
|
Competencies |
4.1) |
|
Granting competency in this unit shall be made only after competency in the following unit(s) has/have been confirmed. |
||
UEENEEH117A |
Carry out repairs of predictable faults in video and audio replay/recording apparatus |
|
UEENEEH158A |
Design integrated security systems |
Literacy and numeracy skills |
4.2) |
|||||
Participants are best equipped to achieve competency in this unit if they have reading, writing and numeracy skills indicated by the following scales. Description of each scale is given in Volume 2, Part 3 ‘Literacy and Numeracy’ |
||||||
Reading |
5 |
Writing |
5 |
Numeracy |
5 |
Employability Skills Information
Employability Skills |
5) |
This unit contains Employability Skills The required outcomes described in this unit of competency contain applicable facets of Employability Skills. The Employability Skills Summary of the qualification in which this unit of competency is packaged will assist in identifying Employability Skill requirements. |
Elements and Performance Criteria Pre-Content
6) Elements describe the essential outcomes of a competency standard unit |
Performance Criteria describe the required performance needed to demonstrate achievement of the element. Assessment of performance is to be consistent with the Evidence Guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
||
1 |
Prepare to design integrated complex security systems |
1.1 |
OHS processes and procedures for a given work area are identified, obtained and understood. |
1.2 |
Established OHS risk control measures and procedures are followed in preparation for the work. |
||
1.3 |
The extent of the proposed integrated system is determined from the design brief or in consultations with appropriate person(s) |
||
1.4 |
Design development work is planned to meet scheduled timelines in consultation with others involved on the work site |
||
2 |
Develop integrated complex security system design |
2.1 |
Knowledge of complex security scenarios and security network standards and protocols, network topology, physical media and disaster planning and remote monitoring and control is applied to the system design. |
2.2 |
Alternative arrangements for the system design are considered based on the requirements outlined in the design brief. |
||
2.3 |
Safety, functional and budget considerations are incorporated in the system design. |
||
2.4 |
System design draft is checked for compliance with the design brief and regulatory requirements. |
||
2.5 |
System design is documented for submission to appropriate person(s) for approval |
||
2.6 |
Solutions to unplanned situation are provided consistent with organisation policy. |
||
3 |
Obtain approval for system design |
3.1 |
System design is presented and explained to client representative and/or other relevant person(s). |
3.2 |
Requests for alterations to the design are negotiated with relevant person(s) within the constraints of organisation policy. |
||
3.3 |
Final design is documented and approval obtained from appropriate person(s). |
||
3.4 |
Quality of work is monitored against personal performance agreement and/or established organizational or professional standards |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
8) This describes the essential skills and knowledge and their level, required for this unit. Evidence shall show that knowledge has been acquired of safe working practices and designing integrated complex security systems. All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies. KS01-EH159A Internetworking security systems Evidence shall show an understanding of internetworking security systems to an extent indicated by the following aspects: T1. Security scenarios T2. security network standards and protocols T3. network topology T4. physical media T5. disaster planning |
Evidence Guide
EVIDENCE GUIDE |
9) The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for this Training Package. . The Evidence Guide forms an integral part of this unit. It must be used in conjunction with all parts of the unit and performed in accordance with the Assessment Guidelines of this Training Package. |
Overview of Assessment |
9.1) |
Longitudinal competency development approaches to assessment, such as Profiling, require data to be reliably gathered in a form that can be consistently interpreted over time. This approach is best utilised in Apprenticeship programs and reduces assessment intervention. It is the Industry-preferred model for apprenticeships. However, where summative (or final) assessment is used it must include the application of the competency in the normal work environment or, at a minimum, the application of the competency in a realistically simulated work environment. It is recognised that, in some circumstances, assessment in part or full can occur outside the workplace. However, it must be in accord with industry and regulatory policy. Methods chosen for a particular assessment will be influenced by various factors. These include the extent of the assessment, the most effective locations for the assessment activities to take place, access to physical resources, additional safety measures that may be required and the critical nature of the competencies being assessed. The critical safety nature of working with electricity, electrical equipment, gas or any other hazardous substance/material carries risk in deeming a person competent. Sources of evidence need to be ‘rich’ in nature to minimise error in judgment. Activities associated with normal everyday work influence decisions about how/how much the data gathered will contribute to its ‘richness’. Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised. These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments. Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package. |
Critical aspects of evidence required to demonstrate competency in this unit |
9.2) |
|
Before the critical aspects of evidence are considered all prerequisites shall be met. Evidence for competence in this unit shall be considered holistically. Each Element and associated performance criteria shall be demonstrated on at least two occasions in accordance with the ‘Assessment Guidelines – UEE11’. Evidence shall also comprise:
|
||
A |
This unit shall be demonstrated by designing one integrated complex security system that extends across multiple sites with remote monitoring and control. |
|
B |
This unit shall be demonstrated by designing one integrated complex security system that extends across multiple sites with remote monitoring and control. |
|
C |
This unit shall be demonstrated by designing one integrated complex security system that extends across multiple sites with remote monitoring and control. |
|
D |
This unit shall be demonstrated by designing one integrated complex security system that extends across multiple sites with remote monitoring and control. |
|
E |
This unit shall be demonstrated by designing one integrated complex security system that extends across multiple sites with remote monitoring and control. |
|
F |
This unit shall be demonstrated by designing one integrated complex security system that extends across multiple sites with remote monitoring and control. |
|
Note: Successful completion of relevant vendor training may be used to contribute to evidence on which competency is deemed. In these cases the alignment of outcomes of vendor training with performance criteria and critical aspects of evidence shall be clearly identified. |
Context of and specific resources for assessment |
9.3) |
This unit should be assessed as it relates to normal work practice using procedures, information and resources typical of a workplace. This should include:
These should be part of the formal learning/assessment environment. Note: Where simulation is considered a suitable strategy for assessment, conditions must be authentic and as far as possible reproduce and replicate the workplace and be consistent with the approved industry simulation policy. The resources used for assessment should reflect current industry practices in relation to designing integrated complex security systems. |
Method of assessment |
9.4) |
This unit shall be assessed by methods given in Volume 1, Part 3 ‘Assessment Guidelines’. Note: Competent performance with inherent safe working practices is expected in the industry to which this unit applies. This requires that the specified essential knowledge and associated skills are assessed in a structured environment which is primarily intended for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit. |
Concurrent assessment and relationship with other units |
9.5) |
There are no concurrent assessment recommendations for this unit. |
Range Statement
RANGE STATEMENT |
10) This relates to the unit as a whole providing the range of contexts and conditions to which the performance criteria apply. It allows for different work environments and situations that will affect performance. This unit shall be demonstrated using a representative range of integrated complex security systems by designing one integrated complex security system that extends across multiple sites with remote monitoring and control. Generic terms used throughout this Vocational Standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms that apply are given in Volume 2, Part 2.1. |
Unit Sector(s)
Not applicable.
Competency Field
Competency Field |
11) |
Electronics |