Modification History
Not Applicable
Description
Scope
This qualification provides competencies to design and validate/evaluate control equipment and systems, manage risk, estimate and manage projects and provide technical advice/sales.
Pathways Information
Not Applicable
Licensing/Regulatory Information
Not Applicable
Entry Requirements
Not Applicable
Employability Skills Summary
Not Applicable
Packaging Rules
Completion requirements
The requirements for awarding this qualification are that the following are successfully achieved:
- All of the Core competency standard units;
- The required number of Stream Core competency standard units;
- The required number of Elective competency standard units as prescribed in the respective Schedule; and
- All the required pre-requisite competency standard units have been met as required.
- Note: UEENEEG005B - Those holding an 'Unrestricted Electricians Licence or equivalent issued in an Australian State or Territory meet the requirements of this unit and its pre-requisite requirements.
Core Competency Standard Units All Core competency standard units to be achieved |
|
UEENEEE001B |
Apply OHS practices in the workplace |
UEENEEE002B |
Dismantle, assemble and fabricate electrotechnology components |
UEENEEE003B |
Solve problems in extra-low voltage single path circuits |
UEENEEE004B |
Solve problems in multiple path d.c. circuits |
UEENEEE005B |
Fix and secure equipment |
UEENEEE007B |
Use drawings, diagrams, schedules and manuals |
UEENEEE008B |
Lay wiring/cabling and terminate accessories for extra-low voltage circuits |
UEENEEE011C |
Manage risk in electrotechnology activities |
UEENEEE017B |
Implement and monitor OHS policies and procedures |
UEENEEE024C |
Compile and produce an electrotechnology report |
UEENEEE033B |
Document occupational hazards and risks in electrical work |
UEENEEE038B |
Participate in development and follow a personal competency development plan |
UEENEEE075B |
Write specifications for industrial electronics and control projects |
UEENEEG001B |
Solve problems in electromagnetic circuits |
UEENEEG002B |
Solve problems in single and three phase low voltage circuits |
UEENEEG003B |
Install wiring and accessories for low voltage circuits |
UEENEEG004B |
Install low voltage electrical apparatus and associated equipment |
UEENEEG005B |
Verify compliance and functionality of general electrical installations |
UEENEEG007B |
Select and arrange equipment for general electrical installations |
UEENEEG008B |
Find and repair faults in electrical apparatus and circuits |
UEENEEG009B |
Develop and connect control circuits |
UEENEEG047B |
Provide computational solutions to power engineering problems |
UEENEEG048B |
Solve problems in complex multiple path power circuits |
UEENEEG049B |
Solve problems in complex polyphase power circuits |
UEENEEI034B |
Manage control projects |
UEENEEI035B |
Plan control projects |
Stream Core Competency Standard Units At least 2 of the following competency standard units to be achieved |
|
BSBMGT502B |
Manage people performance |
BSBINM501A |
Manage an information or knowledge management system |
BSBMGT516C |
Facilitate continuous improvement |
BSBINN502A |
Build and sustain an innovative work environment |
BSBWOR502B |
Ensure team effectiveness |
Elective Competency Standard Units
In accordance with Schedules 3, 4, 5 and 6 which form an integral part of this qualification, achieve a Unit Strand Total of at least 45 of which at least 12 shall be selected from Schedule 6, and at least 14 from Schedule 5, and not more than 12 from Schedule 4 as specified.
Note : 1. Pre-requisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a pre-requisite pathway for the progression to achieve particular competencies or qualification at a higher level.
3. Registered training organisations shall provide competency development advice in relation to any licensing requirements to practice that apply, or can contribute towards the qualification requirement, prior to establishing the competency development plan.
4. Registered training organisations shall also provide information related to the relevant pathway(s) that may be taken to achieve paraprofessional status ("associate membership") with a professional engineering membership organisation.
END OF QUALIFICATION
______________________________________________________________________