Unit of competency details
RIIPGP301D - Conduct drying activities (Release 2)
Summary
Companion volumes:
Unit of competency
Assessment requirements
Replaced release
You are currently viewing the components related to release 2.
The current release is release 3.
View release 3 details.
Training packages that include this unit
Qualifications that include this unit
Classifications
Classification history
| ASCED Module/Unit of Competency Field of Education Identifier | 030717 | Plant And Machine Operations | 02/May/2014 | |
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form
Unit of competency
Modification History
Release
|
Comment
|
|
1
|
This unit replaces RIIPGP301A Conduct drying activities.
|
|
2
|
Amended Performance Criteria to remove repetition.
|
Application
This unit describes a participant’s skills and knowledge required to conduct drying activities in Metalliferous Mining.
This unit is appropriate for those working in operational roles.
Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Unit Sector
Elements and Performance Criteria
|
1. Plan and prepare for drying activities
|
1.1 Access, interpret and apply drying activities documentation and ensure the work activity is compliant
1.2 Obtain, read, interpret, clarify and confirm work requirements
1.3 Select and wear personal protective equipment appropriate for the activity
1.4 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
1.5 Identify and address potential risks, hazards and environmental issues, and implement control measures
1.6 Communicate with other personnel using approved communication methods
1.7 Select drying method appropriate for work activities
1.8 Select appropriate auxiliary equipment for work activities
1.9 Perform equipment pre-start checks to ensure equipment is ready for operation
1.10 Use approved dust suppression and extraction methods
1.11 Ensure area is well ventilated before entry
|
|
2. Start-up equipment in sequence
|
2.1 Carry out start-up procedures and complete start-up checks
2.2 Confirm plant is operational
|
|
3. Operate and monitor equipment
|
3.1 Monitor the drying process
3.2 Take and interpret data from equipment indicator readings to determine drying efficiency
3.3 Continuously inspect operations/plant and catchment areas/sumps to identify drying process defects and potential problems
3.4 Adjust equipment to approved operating parameters to optimise and maintain efficient drying and to meet product quality targets
3.5 Take samples and conduct tests at all stages of process
3.6 Add reagents to approved operating parameters
3.7 Carry out minor maintenance to maintain condition of equipment
3.8 Complete all required documentation
3.9 Complete shift handover
|
|
4. Shutdown in sequence and/or isolate equipment
|
4.1 Shutdown or isolate equipment based on process and safety requirements
4.2 Perform post shutdown or isolation checks
|
|
5. Conduct housekeeping activities
|
5.1 Clear work area and dispose of or recycle materials
5.2 Clean and maintain condition of equipment, ensure suitability for use, and address/report issues
5.3 Manage and/or report hazards, and maintain a safe working environment
5.4 Process records
|
Foundation Skills
Foundation skills essential to performance are explicit in the performance criteria of this unit. Further information is available in the Resources and Infrastructure Industry Training Package Companion Volume.
Unit Mapping Information
RIIPGP301A Conduct drying activities
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272
Assessment requirements
Modification History
Release
|
Comment
|
|
1
|
This unit replaces RIIPGP301A Conduct drying activities.
|
|
2
|
Amended Performance Criteria to remove repetition.
|
Performance Evidence
Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:
- locates and applies applicable legislation, documentation, policies and procedures
- implements requirements, procedures and techniques for the safe, effective conducting of drying activities including:
- selecting and using relevant tools and equipment
- handling dangerous materials
- reading and interpreting instrumentation
- operating lift equipment (manual, cranes and loads)
- diagnosing faults and performing troubleshooting
- works with others to undertake and complete the conduct of drying activities that meets all of the required outcomes including:
- using a range of communications techniques and equipment to convey information to others
- maintaining written and verbal reporting requirements and procedures
- communicating to confirm work requirements
- passing on end of shift information
- reviewing plant performance with oncoming shift
- demonstrates consistent timely completion of drying activities that safely, effectively and efficiently meet all of the required outcomes on a minimum of three (3) separate occasions including:
- completing equipment start-up in sequence
- correctly operating and monitoring equipment including:
- starting up drying plant,
- monitoring drying process,
- taking and interpreting data from equipment indicator readings to determine drying efficiency
- inspecting operations/plant and catchment areas/sumps to identify drying process defects and potential problems
- adjusting equipment to approved operating parameters to optimise and maintain efficient drying and to meet product quality targets
- taking samples and conducting tests
- adding reagents to approved operating parameters
Knowledge Evidence
The candidate must demonstrate knowledge of conducting drying activities through:
- diagnosing faults
- interpreting e-reports
- maintaining records
- monitoring operations
- reporting defects
- applying troubleshooting
- identifying contaminants
- applying drying process (basic)
- applying environmental procedures
- maintaining equipment limitations and operating parameters
- complying with equipment safety requirements
- interpreting metallurgical and technical data (basic)
- complying with operational procedures and checks
- identifying and applying pumping system and flow charts (pipeline and sprinkler systems)
- identifying reagent types
- using sampling
- identifying types of ores (basic)
- being prepared for fire/accident/emergency
Assessment Conditions
- An assessor of this unit must satisfy the requirements of the NVR/AQTF or their successors; and Industry regulations for certification and licensing; and,
- this unit must be assessed in the context of this sector’s work environment; and,
- this unit must be assessed using Resources and Infrastructure Industry sector specific policies, procedures, processes and operational manuals; and,
- an assessor must demonstrate the skills and knowledge of this unit through five (5) years of current and continuous work with the Industry sector and must hold the TAE Assessor Skill Set or equivalent.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272
