Modification History
Not applicable.
Unit Descriptor
Unit descriptor |
This unit is part of the Aeroskills Structures Maintenance AME Certificate IV and of the Mechanical AME Certificate IV training pathways. It covers the competencies required for the inspection of fixed and rotary wing aircraft structures. Where a CASA licensing outcome is sought this unit forms part of the CASA requirement for the granting of the chosen B1 Aircraft Maintenance Engineer Licence under CASR Part 66, in accordance with the licensing provisions in Section 3, Assessment Guidelines. |
Application of the Unit
Application of the unit |
This unit requires application of hand skills and maintenance documentation and manuals to inspect aircraft structure and identify damage and deterioration. Applications include the structure of fixed and rotary wing aircraft. |
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
Prerequisite units |
||
MEA101B |
Interpret occupational health and safety practices in aviation maintenance |
|
MEA103B |
Plan and organise aviation maintenance work activity |
|
MEA105B |
Apply quality standards applicable to aviation maintenance processes |
|
MEA107B |
Interpret and use aviation maintenance industry manuals and specifications |
|
MEA108B |
Complete aviation maintenance industry documentation |
|
MEA109B |
Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance |
Employability Skills Information
Employability skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1. Inspect aircraft structure |
1.1. Relevant maintenance documentation and modification status, including defect reports, where relevant, are used to identify specific inspection requirements. 1.2. Appropriate preparation and access to the aircraft structure is undertaken to allow for proper inspection in accordance with maintenance documentation. 1.3. Aircraft structure is visually or physically checked for signs of deformation, defects or damage in accordance with maintenance documentation and approved procedures. 1.4. Damage or defects are assessed against damage or wear limits specified by structural repair manual or other approved data to determine if repair or replacement is required. 1.5. Maintenance documentation is completed and processed in accordance with standard enterprise procedures. |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
This section describes the skills and knowledge required for this unit. |
Required skills |
Look for evidence that confirms skills in:
|
Required knowledge |
Look for evidence that confirms knowledge of:
|
Evidence Guide
EVIDENCE GUIDE |
|
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. |
|
Overview of assessment |
A person who demonstrates competency in this unit must be able to apply hand skills and use maintenance publications to prepare aircraft structure for inspection and identify structural damage and deterioration while applying all relevant safety precautions. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
The underlying skills inherent in this unit should be transferable across a range of structural inspections associated with aircraft maintenance. It is essential that the procedures take into account all aircraft and personal safety precautions relating to aircraft structure. Evidence is required of the ability to interpret and apply aircraft structural inspection requirements. This may be demonstrated through application across a range of structural components and materials. Ability to interpret inspection procedures and specifications (allowable limits) and apply them in practice is critical. The application of the procedures should also clearly indicate knowledge of structural flight loads. A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of the Unit of Competency are being achieved under routine supervision on at least one task from Group 1 and inspection of at least one item from each of Groups 2 to 6, as listed in the Range Statement. This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry . |
Context of and specific resources for assessment |
Competency should be assessed in the workplace or simulated workplace using tools and equipment specified in maintenance documentation. It is also expected that general purpose tools and test equipment found in most routine situations would be used where appropriate. |
Method of assessment |
|
Guidance information for assessment |
Range Statement
RANGE STATEMENT |
|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
|
Note |
The Range Statements below are numbered to facilitate specification of the assessment requirements included in the Evidence Guide. |
Access to structure |
Preparation and access may include : 1. Preparation for NDI (access to relevant structural zones and components) |
Aircraft structure |
The aircraft structure may include : 2. Non-ferrous and ferrous alloys and composites used in aircraft construction 3. Structural fastening 4. Attachment hardware and/or devices 5. Seals, sealants 6. Glass, moulded plastics |
Inspection techniques |
Inspection techniques may include visual inspection, physical checks, mensuration and alignment. |
Application |
Application of this unit may relate to:
|
Procedures and requirements |
Refer to industry standards specified by manufacturers, regulatory authorities or the enterprise. |
Unit Sector(s)
Unit sector |
Competency field
Competency field |
Aviation maintenance |
Co-requisite units
Co-requisite units |
||