Modification History
Not applicable.
Unit Descriptor
Unit descriptor |
This unit covers the competency to set up operate and maintain a tape edging machine which uses automated processes to apply and finish edge on mattresses and bases. |
Application of the Unit
Application of the unit |
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
Prerequisite units |
Nil |
|
Employability Skills Information
Employability skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1. Plan work operations |
1.1. Work instructions are used to determine job requirements, including quality, materials, equipment and quantities 1.2. Workplace health and safety requirements, including personal protection needs, are observed through the work 1.3. Material for processing is selected and inspected for quality 1.4. Machine and the tape holder unit are identified and checked for safe and effective operation 1.5. Procedures are determined for minimising waste material 1.6. Procedures are identified for maximising energy efficiency while completing the job |
2. Set up machines |
2.1. Machine settings and adjustments are made in accordance with job requirements and machine and tool manufacturer instructions 2.2. Trial runs are conducted to check machine operation, accuracy and quality of finished work 2.3. Necessary adjustments are made to machine settings |
3. Complete tape edging |
3.1. Machine start-up procedure is carried out in accordance with manufacturers' instructions 3.2. Material is fed into machine in accordance with manufacturers' instructions, tooling requirements, safe handling procedures and standard workplace operating procedures 3.3. Machine is operated in accordance with its designed capacity and purpose, and to manufacturer recommendations 3.4. Machine operation, including inputs and outcomes, is monitored to ensure product quality and output 3.5. Waste quantities are checked and minimised 3.6. Items that do not meet quality requirements are repaired, recycled or discarded according to workplace procedures 3.7. Problems with the required work or the operation of the machine are identified and reported to appropriate persons |
4. Clean up work area and maintain equipment |
4.1. Material that can be re-used is collected and stored 4.2. Waste and scrap is removed following workplace procedures 4.3. Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures 4.4. Unserviceable equipment is tagged and faults identified in accordance with workplace procedures 4.5. Operator maintenance is completed in accordance with manufacturer specifications and site procedures |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
This section describes the skills and knowledge required for this unit. |
Required skills |
|
Required knowledge |
|
Evidence Guide
EVIDENCE GUIDE |
|
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. |
|
Critical aspects of evidence |
|
Resource implications |
Access to a semi-automated or automated tape edging machine, including tooling equipment and accuracy devices. |
Method of assessment |
Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts. Assessment should be by direct observation of tasks and questioning on underpinning knowledge. Assessment should be conducted over time and will generally be in conjunction with assessment of other units of competency. |
Context of assessment |
Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines. |
Range Statement
RANGE STATEMENT |
|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
|
Unit scope |
Work involves applying and processing a tape edge to a mattress or base |
Unit context |
|
Tape edging machine |
|
Materials to be processed may include but are not limited to : |
|
Operator maintenance |
Operator maintenance is to include the cleaning and refurbishing of the tape edging head unit and tape holder |
Personal protective equipment |
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices. |
Information and procedures |
|
Unit Sector(s)
Unit sector |
Mattress and Base Making |
Competency field
Competency field |
Co-requisite units
Co-requisite units |
||