Modification History
Not applicable.
Unit Descriptor
Unit descriptor |
This unit covers the competency to construct, assemble and finish a basic mattress and base product. |
Application of the Unit
Application of the unit |
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
Prerequisite units |
Nil |
|
Employability Skills Information
Employability skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1. Prepare for work |
1.1. Work instructions are used to determine job requirements, including design variations, tolerances, process, materials, finish and quantity 1.2. Fabrication and assembly sequence is planned 1.3. Procedures are determined for checking quality at each stage of the process 1.4. Workplace health and safety requirements, including personal protection needs, are observed throughout the work 1.5. Suitable work area is selected for the task 1.6. Preparatory drawings/set-outs for tasks are confirmed 1.7. Materials are selected following work instructions 1.8. Tools and equipment suitable for fabrication are identified and checked for safe and effective operation |
2. Complete fabrication |
2.1. Material is prepared and set out according to work instructions and components are marked according to workplace procedures 2.2. Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications 2.3. Components are prepared and checked against set-out and job requirements 2.4. Components are fabricated using fastenings and adhesives 2.5. Assembly process is undertaken according to workplace procedures 2.6. Fabricated product is checked for compliance with specifications 2.7. Item is finished in accordance with work instructions |
3. Finalise operation and maintain equipment |
3.1. Work area is cleaned and hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures 3.2. Off-cuts and unused materials are collected and stored for reuse or disposed following workplace procedures 3.3. Waste and scrap materials are dealt with following workplace procedures |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
This section describes the skills and knowledge required for this unit. |
Required skills |
|
Required knowledge |
|
Evidence Guide
EVIDENCE GUIDE |
|
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. |
|
Critical aspects of evidence |
|
Resource implications |
Access to plans, tools, equipment, materials, a work area and a specified project. |
Method of assessment |
Assessment should be by direct observation of tasks and questioning on underpinning knowledge. Assessment may be conducted in conjunction with assessment of other units of competency. |
Context of assessment |
Assessment may occur on the job or in a workplace simulated facility with relevant equipment, materials, work instructions and deadlines. |
Range Statement
RANGE STATEMENT |
|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
|
Unit context |
|
Basic mattress product may include : |
Project is to be determined in consultation with supervisor/teacher. |
Tools and equipment may include , but are not limited to : |
|
Machines may include , but are not limited to : |
|
Materials to be used may include but are not limited to : |
|
Personal protective equipment |
Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices |
Information and procedures |
|
Unit Sector(s)
Unit sector |
Mattress and Base Making |
Competency field
Competency field |
Co-requisite units
Co-requisite units |
||