Unit of competency details
AURRTR108 - Diagnose and repair marine network electronic control systems (Release 1)
Summary
Usage recommendation:
Current
Releases:
| 1 1 (this release) |
13/Nov/2020 |
Companion volumes:
Unit of competency
Assessment requirements
Training packages that include this unit
Qualifications that include this unit
Classifications
Classification history
| ASCED Module/Unit of Competency Field of Education Identifier | 030505 | Automotive Electrics And Electronics | 09/Feb/2021 | |
The content being displayed has been produced by a third party, while all attempts have been made to make this content as accessible as possible it cannot be guaranteed. If you are encountering issues following the content on this page please consider downloading the content in its original form
Unit of competency
Modification History
|
Release
|
Comments
|
|
Release 1
|
This version first released with AUR Automotive Retail, Service and Repair Training Package Version 6.0
|
Application
This unit describes the skills and knowledge required to diagnose and repair network electronic control systems in marine vessels. These systems include two-wire high and low speed (CAN-bus) and single wire low speed (LIN-bus) networked circuits essential to control engine powertrain, vehicle dynamic control functions and body control functions. They include vehicle infotainment and climate control systems. The unit involves preparing for the task, sourcing a diagnostic testing strategy, diagnosing the cause of the fault, carrying out the repair, performing post-repair testing, and completing workplace processes and documentation.
This unit applies to those working in the marine service and repair industry.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Unit Sector
Marine Technical - Electrical and Electronic
Elements and Performance Criteria
|
ELEMENTS
|
PERFORMANCE CRITERIA
|
|
Elements describe the essential outcomes.
|
Performance criteria describe the performance needed to demonstrate achievement of the element.
|
|
1. Prepare to diagnose and repair network electronic control system
|
1.1 Identify job requirements from workplace instructions
1.2 Identify required information for diagnosis activity
1.3 Analyse diagnostic options and source testing strategy to identify cause of fault using workplace and manufacturer procedures
1.4 Identify hazards and environmental issues associated with diagnose and repair activity, assess potential risks and implement control measures in line with workplace policies and procedures
1.5 Identify tools and equipment required for testing strategy and establish serviceability according to workplace procedures
|
|
2. Diagnose network electronic control system
|
2.1 Implement diagnostic tests set out in testing strategy according to manufacturer and workplace procedures, and workplace health and safety requirements
2.2 Identify cause of fault through analysis of diagnostic test results
2.3 Confirm and report cause of fault according to workplace procedures
2.4 Develop and report recommendations for necessary repairs according to workplace procedures
|
|
3. Repair network electronic control system
|
3.1 Identify required information for repair activity
3.2 Identify tools, equipment and materials required for repair activity and establish serviceability according to workplace procedures
3.3 Carry out repairs according to workplace and manufacturer procedures, manufacturer specifications, workplace health and safety and environmental requirements
3.4 Carry out post-repair testing according to workplace procedures, workplace health and safety and environmental requirements
|
|
4. Complete work processes
|
4.1 Conduct final inspection according to workplace procedures and confirm vehicle is ready for use
4.2 Clear work area and dispose of or recycle materials according to workplace procedures
4.3 Complete documentation according to workplace procedures
|
Foundation Skills
This section describes those language, literacy, numeracy and employment skills that are essential to performance but not explicit in the performance criteria.
|
SKILL
|
DESCRIPTION
|
|
Learning
|
- Locates required sources of information efficiently
- Develops a sequenced plan for a specific task.
|
|
Reading
|
- Organises and interprets technical information from workplace procedures, manufacturer procedures and manufacturer specifications
- Interprets text, symbols and wiring diagrams in information relating to electrical system testing and repair equipment from manufacturer specifications and workplace instructions and procedures.
|
|
Oral communication
|
- Clarifies instructions
- Obtains information from customers and supervisors.
|
|
Numeracy
|
- Matches electrical components and part identification numbers to workplace instructions, vehicle, machinery and component part lists, and manufacturer specifications
- Interprets vehicle electrical measurements and readings
- Measures voltage, current and resistance and uses mathematical operations
- Calculates deviations from manufacturer specifications.
|
|
Planning and organising
|
- Plans own work requirements
- Prioritises actions to achieve required outcomes
- Ensures tasks are completed within workplace timeframes.
|
|
Technology
|
- Uses specialised equipment.
|
Unit Mapping Information
New unit.
Links
Companion Volume Implementation Guide is found on VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b4278d82-d487-4070-a8c4-78045ec695b1
Assessment requirements
Modification History
|
Release
|
Comments
|
|
Release 1
|
This version first released with AUR Automotive Retail, Service and Repair Training Package Version 6.0
|
Performance Evidence
The candidate must demonstrate the ability to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including evidence of the ability to:
- diagnose and repair a fault in three different network electronic control circuits that set network communication diagnostic trouble codes (DTCs), including at least one of each of the following:
- a single wire circuit (LIN-bus)
- a two-wire circuit (CAN-bus).
Knowledge Evidence
The candidate must be able to demonstrate knowledge to complete the tasks outlined in the elements, performance criteria and foundation skills of this unit, including knowledge of:
- methods to locate and interpret information required to diagnose and repair network electronic control systems including:
- information provided by customers and supervisors
- manufacturer specifications and procedures or equivalent documentation
- workplace procedures required to diagnose and repair network electronic control systems including:
- establishing serviceability of tools and equipment
- documentation procedures
- housekeeping procedures including:
- examination of tools and equipment
- storage of equipment
- identification, tagging and isolation of faulty equipment
- disposal of excess materials
- recycling procedures
- workplace health and safety (WHS) requirements relating to diagnosing and repairing network electronic control systems, including procedures for identifying hazards and controlling risks associated with:
- working on vehicle high voltage ignition systems
- wearing jewellery while working around high current wiring systems
- environmental procedures relating to diagnosing and repairing network electronic control systems
- diagnostic testing procedures for network electronic control systems, including:
- using diagnostic flow charts
- accessing and interpreting scan tool system data, including:
- DTCs, including ‘U’ type communication codes
- live data
- waveforms
- testing electrical systems, including procedures for:
- accessing electrical terminals and using test probes without damaging connectors, fuse holders or wiring
- determining damage to system wiring and connectors
- repair procedures for network electronic control systems, including:
- connector removal and replacement procedures
- removal and replacement procedures for vehicle network electronic control system components
- post-repair testing procedures for network electronic control systems, including:
- confirming fault rectification DTC clearing procedures
- checking for electrical connector mating.
- operating principles of network electronic control systems and associated components, including:
- assurance of message delivery, non-conflicting messages, minimum time of delivery, and electromagnetic field (EMF) noise resilience
- network topographies
- network protocols, including characteristics and data speeds
- purpose and operation of network electronic control systems and components, including:
- controlled area network (CAN), including:
- nodes: host processor, CAN controller, and transceiver
- gateway modules
- terminating resistors
- data transmission
- vehicle data logic connector (DLC)
- local interconnect network (LIN), including:
- master and slaves
- data transmission.
Assessment Conditions
Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.
Assessment must include direct observation of tasks.
Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the electronic control systems in marine vessels that they have worked on, e.g. repair orders.
Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.
The following resources must be made available:
- marine repair workplace or simulated workplace
- workplace instructions
- manufacturer transmission specifications
- two different network electronic control circuits
- diagnostic equipment for marine network electronic control systems
- tools, equipment and materials appropriate for diagnosing, testing, repairing, and adjusting marine network electronic control systems.
Assessors of this unit must satisfy the requirements for assessors in applicable vocational education and training legislation, frameworks and/or standards.
Links
Companion Volume Implementation Guide is found on VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b4278d82-d487-4070-a8c4-78045ec695b1
