Unit of competency
Modification History
Release |
Comment |
Release 1 |
New unit of competency. |
Application
This unit describes the performance outcomes required to repair and overhaul bicycle steering systems. It involves preparing for the work, selecting and using specialist tools and equipment, inspecting, repairing and testing the bicycle headset, handlebar and stem, and completing workplace processes and documentation.
It applies to those working in the bicycle retail, service and repair industry.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Competency Field
Bicycle
Unit Sector
Technical - Steering and Suspension
Elements and Performance Criteria
Elements Elements describe the essential outcomes. |
Performance Criteria Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold and italicised text is used, further information is detailed in the range of conditions section. |
1. Prepare to repair and overhaul bicycle steering system |
1.1 Job requirements are determined from workplace instructions 1.2 Manufacturer specifications, workplace procedures and other relevant technical information are accessed and interpreted 1.3 Hazards associated with the work are identified and risks are managed 1.4 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability 1.5 Work is planned to avoid damage to bicycle, minimise waste and use time efficiently |
2. Inspect steering system |
2.1 Bicycle steering system is checked for faults and worn or damaged components using visual inspection methods and by comparing measurements against manufacturer specifications 2.2 Repair and replacement options are identified, documented and costed for customer approval according to workplace procedures 2.3 Work area, replacement parts and bicycle are prepared for repair work |
3. Carry out repair and overhaul of steering system |
3.1 Repair and overhaul activities are carried out according to workplace procedures, work plan, and safety and environmental requirements 3.2 Required replacement parts are checked and fitted according to manufacturer specifications 3.3 Repaired steering system is checked and tested for correct operation according to manufacturer specifications 3.4 Repaired steering system is adjusted and aligned as required according to workplace procedures 3.5 Results and quality issues are reported to authorised personnel as required |
4. Complete work processes |
4.1 Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use 4.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored 4.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures 4.4 Workplace documentation is processed according to workplace procedures |
Foundation Skills
This section describes those language, literacy, numeracy and employment skills that are essential to performance and are not explicit in the performance criteria.
Skills |
Description |
Learning skills to: |
|
Writing skills to: |
|
Oral communication skills to: |
|
Numeracy skills to: |
|
Problem solving skills to: |
|
Technology skills to: |
|
Range of Conditions
This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Steering system must include: |
|
Safety and environmental requirements must include: |
|
Unit Mapping Information
Equivalent to AURBTD3003 Repair and overhaul bicycle steering systems
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b4278d82-d487-4070-a8c4-78045ec695b1