Modification History
Not applicable.
Description
Scope
This qualification provides competencies to design and validate/evaluate process control equipment and systems, manage risk, estimate and manage projects and provide technical advice/sales. It’s also provides competencies to install, set up, test, develop, select, commission, maintain, diagnose faults/malfunctions of equipment and systems.
Pathways Information
Not applicable.
Licensing/Regulatory Information
Not applicable.
Entry Requirements
Not applicable.
Employability Skills Summary
Not applicable.
Packaging Rules
Completion requirements
The requirements for granting this qualification will be met when competency is demonstrated and achieved for:
- All the Core competency standard units, defined in the Core Competency Standard Units table below and
- A combination of Elective competency standard units to achieve a total weighting of 420 points in accordance with the Elective Competency Standard Units table below.
Note: UEENEEI112A - Those holding an ‘Certificate III in Instrumentation and Control trade qualification or equivalent" meet the requirements of this unit and its pre-requisite requirements.
Core Competency Standard Units All Core competency standard units to be achieved |
Weighting Points |
|
UEENEED104A |
Use software for engineering applications |
40 |
UEENEEE006B |
Apply methods to maintain currency of industry developments |
20 |
UEENEEE011C |
Manage risk in electrotechnology activities |
60 |
UEENEEE015B |
Develop design briefs for electrotechnology projects |
40 |
UEENEEE075B |
Write specifications for industrial electronics and control projects |
40 |
UEENEEE080A |
Apply industry and community standards to engineering activities |
20 |
UEENEEE081A |
Apply material science to solving electrotechnology engineering problems |
60 |
UEENEEE082A |
Apply physics to solving electrotechnology engineering problems |
60 |
UEENEEE083A |
Establish and follow a competency development plan in an electrotechnology engineering discipline |
120 |
UEENEEE101A |
Apply Occupational Health Safety regulations, codes and practices in the workplace |
20 |
UEENEEE102A |
Fabricate, dismantle, assemble of utilities industry components |
40 |
UEENEEE104A |
Solve problems in d.c. circuits |
80 |
UEENEEE105A |
Fix and secure electrotechnology equipment |
20 |
UEENEEE107A |
Use drawings, diagrams, schedules, standards, codes and specifications |
40 |
UEENEEE117A |
Implement and monitor OHS energy sector procedures and policies |
20 |
UEENEEE119A |
Solve problems in multiple path extra low voltage (ELV) a.c. circuits |
40 |
UEENEEE124A |
Compile and produce an energy sector report |
60 |
UEENEEE125A |
Provide solutions to complex multiple path circuits problems |
60 |
UEENEEE126A |
Provide solutions to basic engineering computational problems |
60 |
UEENEEE137A |
Document and apply measures to control OHS risks associated with electrotechnology work |
20 |
UEENEEI101A |
Use instrumentation drawings, specifications, standards and equipment manuals |
40 |
UEENEEI102A |
Solve problems in pressure measurement circuits and systems |
40 |
UEENEEI103A |
Solve problems in density/level measurement circuits and systems |
40 |
UEENEEI104A |
Solve problems in flow measurement circuits and systems |
40 |
UEENEEI105A |
Solve problems in temperature measurement circuits and systems |
40 |
UEENEEI106A |
Set up and adjust PID process control loops |
40 |
UEENEEI107A |
Install process instrumentation and tubing and control cabling |
20 |
UEENEEI108A |
Install process control apparatus and associated equipment |
20 |
UEENEEI110A |
Set up and adjust advanced process control loops |
40 |
UEENEEI111A |
Find and rectify faults in process final control elements |
40 |
UEENEEI112A |
Verify compliance and functionality of instrumentation and control installations |
40 |
UEENEEI113A |
Setup and configure human-machine interface (HMI) and industrial networks |
60 |
UEENEEI124A |
Diagnose and rectify faults in electronic control systems |
60 |
UEENEEI134A |
Manage instrumentation and control projects |
40 |
UEENEEI135A |
Plan instrumentation and control projects |
60 |
UEENEEI139A |
Diagnose and rectify faults in digital controls systems |
60 |
UEENEEI150A |
Develop, enter and verify discrete control programs for programmable controllers |
60 |
UEENEEK132A |
Develop energy sector strategies to address environmental and sustainability issues |
20 |
UEENEEP013A |
Disconnect /reconnect control devices connected to low voltage installation wiring |
60 |
Total points in core |
1740 |
Elective Competency Standard Units Complete Elective units to achieve a total of weighting of 420 points from the following groups: |
|||
Group |
Minimum points |
Maximum points |
|
A |
Imported and Common Elective Units Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 6. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. |
0 |
170 |
B |
Qualification Elective Units |
0 |
80 |
C |
Qualification Elective Units |
0 |
80 |
D |
Qualification Elective Units |
0 |
80 |
E |
Qualification Elective Units You may select all your elective units from this Group |
180 |
420 |
Group A – Imported and Common Elective Units You may complete units to a maximum weighting of 170 |
Weighting Points |
|
BSBMGT502B |
Manage people performance |
70 |
BSBINM501A |
Manage an information or knowledge management system |
50 |
BSBMGT516C |
Facilitate continuous improvement |
60 |
BSBINN502A |
Build and sustain an innovative work environment |
50 |
BSBWOR502B |
Ensure team effectiveness |
60 |
Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 6. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. Note: For further information see Application of the NQC Flexibility Formula, UEE11 Electrotechnology Training Package, Version 1, Volume 1 Qualification Framework |
Up to 170 points |
Group B – Qualification Elective Units You may complete units to a maximum weighting of 80 |
Weighting Points |
|
UEENEED101A |
Use basic computer applications relevant to a energy sector workplace |
20 |
UEENEEE190A |
Prepare engineering drawings using manual drafting and CAD for electrotechnology/utilities applications |
60 |
UEENEEE191A |
Prepare electrotechnology/utilities drawings using manual drafting and CAD equipment and software |
60 |
UEENEEH102A |
Repair basic electronic apparatus faults by replacement of components |
40 |
UEENEEH111A |
Troubleshoot single phase input d.c. power supplies |
40 |
UEENEEI114A |
Find and rectify faults in process control systems |
60 |
UEENEEI115A |
Find and rectify faults in medical equipment and control systems |
120 |
UEENEEI117A |
Calibrate and test measuring instrumentation equipment |
40 |
UEENEEI118A |
Set up weighting measuring and control instruments |
20 |
UEENEEI131A |
Set up gas analysis measuring and control instruments |
20 |
UEENEEI132A |
Set up water analysis measuring and control instruments |
20 |
UEENEEI133A |
Set up scientific analysis measuring and control instruments |
20 |
UEENEEM019A |
Attend to breakdowns in hazardous areas — coal mining |
20 |
UEENEEM020A |
Attend to breakdowns in hazardous areas — gas atmospheres |
20 |
UEENEEM021A |
Attend to breakdowns in hazardous areas — dust atmospheres |
20 |
UEENEEM022A |
Attend to breakdowns in hazardous areas — pressurisation |
20 |
UEENEEM023A |
Install explosion-protected equipment and wiring systems — coal mining |
60 |
UEENEEM024A |
Install explosion-protected equipment and wiring systems — gas atmospheres |
60 |
UEENEEM025A |
Install explosion-protected equipment and wiring systems — dust atmospheres |
60 |
UEENEEM026A |
Install explosion-protected equipment and wiring systems — pressurisation |
60 |
UEENEEM027A |
Maintain equipment in hazardous areas — coal mining |
60 |
UEENEEM028A |
Maintain equipment in hazardous areas — gas atmospheres |
60 |
UEENEEM029A |
Maintain equipment in hazardous areas — dust atmospheres |
60 |
UEENEEM030A |
Maintain equipment in hazardous areas — pressurisation |
60 |
UEENEEM076A |
Use and maintain the integrity of a portable gas detection device |
20 |
UEENEEM077A |
Install and maintain the integrity of fixed gas detection equipment |
20 |
UEENEEM080A |
Report on the integrity of explosion-protected equipment in a hazardous area |
20 |
Group C – Qualification Elective Units You may complete units to a maximum weighting of 80 |
Weighting Points |
|
UEENEEC005B |
Estimate electrotechnology projects |
40 |
UEENEEE192A |
Produce detailed electrotechnology/utilities drawings using computer aided design equipment and software |
60 |
UEENEEI121A |
Find and repair faults in measuring and analysis systems |
40 |
UEENEEI122A |
Assist in commissioning of process control systems |
40 |
UEENEEI125A |
Provide solutions to fluid circuit operations |
60 |
UEENEEI126A |
Provide solutions to pneumatic/hydraulic system operations |
80 |
UEENEEI148A |
Provide solutions to single phase electronic power control problems |
60 |
UEENEEI149A |
Provide solutions to polyphase electronic power control problems |
60 |
UEENEEI151A |
Develop, enter and verify programs for industrial control systems using high level instructions |
60 |
UEENEEI152A |
Develop, enter and verify programs in Supervisory Control and Data Acquisition systems |
60 |
UEENEEI155A |
Develop structured programs to control external devices |
40 |
UEENEEM038A |
Conduct testing of hazardous areas installations — coal mining |
40 |
UEENEEM039A |
Conduct testing of hazardous areas installations — gas atmospheres |
40 |
UEENEEM040A |
Conduct testing of hazardous areas installations — dust atmospheres |
40 |
UEENEEM041A |
Conduct testing of hazardous area installations — pressurisation |
40 |
UEENEEM042A |
Conduct visual inspection of hazardous areas installations |
40 |
UEENEEM043A |
Conduct detailed inspection of hazardous areas installations — coal mining |
40 |
UEENEEM044A |
Conduct detailed inspection of hazardous areas installations — gas atmospheres |
40 |
UEENEEM045A |
Conduct detailed inspection of hazardous areas installations — dust atmospheres |
40 |
UEENEEM046A |
Conduct detailed inspection of hazardous areas installations — pressurisation |
40 |
UEENEEM078A |
Manage compliance of hazardous areas |
20 |
Group D – Qualification Elective Units You may complete units to a maximum weighting of 80 |
Weighting Points |
|
UEENEEC006B |
Prepare tender submissions for electrotechnology projects |
60 |
UEENEED116A |
Develop computer network services |
120 |
UEENEED110A |
Set up and create content for a web server |
120 |
UEENEED111A |
Develop object oriented code |
140 |
UEENEED144A |
Commission computer systems |
20 |
UEENEED145A |
Modify-redesign of computer system |
20 |
UEENEEG131A |
Evaluate performance of LV electrical apparatus |
40 |
UEENEEG180A |
Develop detailed and complex drawings for electrical systems using CAD systems |
60 |
UEENEEI127A |
Analyse complex electronic circuits controlling fluids |
80 |
UEENEEI145A |
Diagnose and rectify faults in a.c. motor drive systems |
60 |
UEENEEI146A |
Diagnose and rectify faults in d.c. motor drive systems |
60 |
UEENEEI147A |
Diagnose and rectify faults in servo drive systems |
60 |
UEENEEI156A |
Develop and test code for microcontroller devices |
60 |
UEENEEI157A |
Configure and maintain industrial control system networks |
60 |
UEENEEM035A |
Conduct a conformity assessment of explosion-protected equipment — coal mining |
40 |
UEENEEM036A |
Conduct a conformity assessment of explosion-protected equipment — gas atmospheres |
40 |
UEENEEM037A |
Conduct a conformity assessment of explosion-protected equipment — dust atmospheres |
40 |
UEENEEM054A |
Plan electrical installations for hazardous areas — gas atmospheres |
20 |
UEENEEM064A |
Conduct audit of hazardous areas installations — coal mining |
60 |
UEENEEM065A |
Conduct audit of hazardous areas installations — gas atmospheres |
60 |
UEENEEM066A |
Conduct audit of hazardous areas installations — dust atmospheres |
60 |
UEENEEM067A |
Assess the fitness-for-purpose of hazardous areas explosion-protected equipment — coal mining |
60 |
UEENEEM068A |
Assess the fitness-for-purpose of hazardous areas explosion-protected equipment — gas atmospheres |
60 |
UEENEEM069A |
Assess the fitness-for-purpose of hazardous areas explosion-protected equipment — dust atmospheres |
60 |
Group E – Qualification Elective Units You must complete units to a minimum weighting of 180 You may select all your elective units from this Group |
Weighting Points |
|
UEENEEC007B |
Manage contract variations |
40 |
UEENEEE127A |
Use advanced computational processes to provide solutions to engineering problems |
80 |
UEENEEE128A |
Develop engineering solutions to photonic problems |
80 |
UEENEEE160A |
Provide engineering solutions for uses of materials and thermodynamic effects |
80 |
UEENEEE161A |
Analyse static and dynamic parameters of electrotechnology/utilities equipment |
80 |
UEENEEE162A |
Select drive components for equipment design |
80 |
UEENEEE163A |
Analyse materials for suitability in electrotechnology/utilities equipment |
80 |
UEENEEE164A |
Design electrical machine drives and production layout plans |
80 |
UEENEEE078B |
Contribute to risk management in electrotechnology systems |
20 |
UEENEEH147A |
Assess compliance of electronic apparatus |
60 |
UEENEEH184A |
Modify DSP based sub-systems |
80 |
UEENEEH185A |
Design a signal-conditioning subsystem |
80 |
UEENEEH188A |
Design and develop electronics/computer systems projects |
40 |
UEENEEI123A |
Design electronic control and instrumentation systems |
60 |
EENEEI128A |
Set up controls on complex fluid systems |
80 |
UEENEEI129A |
Set up electronically controlled mechanically operated complex systems |
80 |
UEENEEI130A |
Set up electronically controlled robotically operated complex systems |
80 |
UEENEEI153A |
Design and configure Human-Machine Interface (HMI) networks |
60 |
UEENEEI154A |
Design a computer based control system |
120 |
UEENEEM052A |
Classify hazardous areas — gas atmospheres |
40 |
UEENEEM053A |
Classify hazardous areas — dust atmospheres |
40 |
UEENEEM057A |
Design explosion-protected electrical systems and installations — gas atmospheres |
20 |
UEENEEM058A |
Design explosion-protected electrical systems and installations — dust atmospheres |
20 |
UEENEEM059A |
Design explosion-protected electrical systems and installations — pressurisation |
20 |
UEENEEM075A |
Design explosion-protected electrical systems — Coal mining |
20 |
UEENEEM079A |
Design of gas detection systems and installations |
20 |
Note:
1. Pre-requisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a pre-requisite pathway for the progression to achieve particular competencies or qualification at a higher level.
3. Registered training organisations shall also provide information related to the relevant pathway(s) that may be taken to achieve paraprofessional status ("associate membership") with a professional engineering membership organisation.
END OF QUALIFICATION
Custom Content Section
Not applicable.