Modification History
Release 2. Imported elective units updated. Supersedes and equivalent to MEM30522 Certificate III in Engineering - Technical (Release 1).
Release 1. Supersedes and is equivalent to MEM30505 Certificate III in Engineering - Technical.
Qualification Description
This qualification defines the skills and knowledge required of an Engineering Technician within metal, engineering, manufacturing and associated industries.
The skills associated with this qualification are intended to apply to a wide range of engineering work including undertaking production planning, scheduling, work studies, estimating material requirements, inspection, quality control, laboratory procedures, supplier evaluation, non-destructive testing, metallurgy, drafting, assisting in design and development work of product and processes and other technical tasks.
This qualification is designed to provide an entry pathway to technician work in industry and is available through a Training Contract associated with an Australian Traineeship or through formal skills and knowledge recognition.
In some jurisdictions units in this qualification may relate to licensing or regulatory requirements. Licensing and regulatory information is included in the relevant units of competency.
No licensing, legislative or certification requirements apply to this qualification at the time of publication. Local regulations should be checked.
Entry Requirements
There are no entry requirements for this qualification.
Packaging Rules
The requirement for achievement of the MEM30522 Certificate III in Engineering - Technical is the achievement of competence in ten (10) units of competency made up of:
- all three (3) core units listed below
- a minimum of four (4) and a maximum of seven (7) elective units from Group A
- a maximum of two (2) elective units from Group B
- a maximum of one (1) elective unit from Group C.
A maximum of two (2) Group A elective units, that are relevant to work as Engineering Technician within metal, engineering, manufacturing and associated industries and do not duplicate skills and knowledge already available in units within this qualification, may be chosen from this Training Package, other endorsed Training Packages and accredited courses where those units are available for inclusion at Certificate III.
No other descriptor can be used.
Prerequisites
Prerequisite units count towards the total number of units. Units with prerequisite requirements are marked with an asterisk (refer to the individual units for details). All prerequisites are included in the qualification.
Core units of competency
Unit code |
Unit title |
Prereq |
MEM16006 |
Organise and communicate information |
* |
MEM16008 |
Interact with computing technology |
* |
MEM30012 |
Apply mathematical techniques in a manufacturing engineering or related environment |
Elective units of competency
Group A
Unit code |
Unit title |
Prereq |
MEM09201 |
Work effectively in an engineering drafting workplace |
|
MEM09202 |
Produce freehand sketches |
|
MEM09203 |
Measure and sketch site information |
|
MEM09204 |
Produce basic engineering detail drawings |
* |
MEM09205 |
Produce electrical schematic drawings |
* |
MEM09208 |
Detail fasteners and locking devices in mechanical drawings |
* |
MEM09209 |
Detail bearings, seals and other componentry in mechanical drawings |
* |
MEM09213 |
Produce schematic drawings for hydraulic and pneumatic fluid power systems |
* |
MEM09223 |
Interpret design specifications for structural steel detailing |
* |
MEM09224 |
Detail bolts and welds for structural steelwork connections |
* |
MEM09229 |
Read and interpret technical engineering drawings |
|
MEM11011 |
Undertake manual handling |
* |
MEM12023 |
Perform engineering measurements |
* |
MEM12024 |
Perform computations |
* |
MEM13003 |
Work safely with industrial chemicals and materials |
* |
MEM13004 |
Work safely with molten metals/glass |
* |
MEM13015 |
Work safely and effectively in manufacturing and engineering |
|
MEM13018 |
Work safely with ionizing radiation |
|
MEM13019 |
Undertake work health and safety activities in the workplace |
|
MEM15001 |
Perform basic statistical quality control |
* |
MEM16003 |
Provide advanced customer service |
* |
MEM18001 |
Use hand tools |
* |
MEM30005 |
Calculate force systems within simple beam structures |
* |
MEM30006 |
Calculate stresses in simple structures |
* |
MEM30007 |
Select common engineering materials |
|
MEM30008 |
Apply basic economic and ergonomic concepts to evaluate engineering applications |
|
MEM30009 |
Contribute to the design of basic mechanical systems |
* |
MEM30010 |
Set up basic hydraulic circuits |
|
MEM30011 |
Set up basic pneumatic circuits |
|
MEM30013 |
Assist in the preparation of a basic workplace layout |
|
MEM30014 |
Apply basic just in time systems to the reduction of waste |
|
MEM30015 |
Develop recommendations for basic set up time improvements |
|
MEM30016 |
Assist in the analysis of a supply chain |
|
MEM30017 |
Use basic preventative maintenance techniques and tools |
|
MEM30018 |
Undertake basic process planning |
|
MEM30019 |
Use resource planning software systems in manufacturing |
* |
MEM30020 |
Develop and manage a plan for a simple manufacturing related project |
|
MEM30021 |
Prepare a simple production schedule |
|
MEM30022 |
Undertake supervised procurement activities |
|
MEM30023 |
Prepare a simple cost estimate for a manufactured product |
|
MEM30024 |
Participate in quality assurance techniques |
* |
MEM30025 |
Analyse a simple electrical system circuit |
* |
MEM30026 |
Select and test components for simple electronic switching and timing circuits |
* |
MEM30027 |
Prepare basic programs for programmable logic controllers |
|
MEM30028 |
Assist in sales of technical products |
|
MEM30031 |
Operate computer-aided design (CAD) system to produce basic drawing elements |
|
MEM30032 |
Produce basic engineering drawings |
|
MEM30033 |
Use computer-aided design (CAD) to create and display 3D models |
* |
MEM48001 |
Test the mechanical properties of materials |
|
MEM48002 |
Monitor ferrous melting and casting processes |
|
MEM48003 |
Monitor nonferrous melting and casting processes |
|
MEM48004 |
Interpret basic binary phase diagrams |
|
MEM48005 |
Apply basic knowledge of casting operations |
|
MSMENV272 |
Participate in environmentally sustainable work practices |
|
MSS402003 |
Apply competitive systems and practices |
|
MSS402004 |
Sustain process improvements |
|
MSS402022 |
Apply quick changeover procedures |
|
MSS402032 |
Interpret cost and waste in terms of customer value |
|
MSS402054 |
Monitor process capability |
|
MSS402062 |
Use SCADA systems in operations |
|
MSS402084 |
Undertake root cause analysis |
|
MSS402086 |
Use planning software systems in operations |
|
MSS402087 |
Apply cost factors to work practices |
|
MSS403031 |
Analyse and improve manual handling processes |
|
MSS403081 |
Ensure process improvements are sustained |
|
MSS403082 |
Improve cost factors in work practices |
|
MSTGN4017 |
Participate in product engineering |
|
MSTGN4020 |
Contribute to the development of products or processes |
|
TLIG2007 |
Work in a socially diverse environment |
Group B
Unit code |
Unit title |
Prereq |
MEM24001 |
Perform basic penetrant testing |
* |
MEM24003 |
Perform basic magnetic particle testing |
* |
MEM24005 |
Perform basic eddy current testing |
* |
Group C
Unit code |
Unit title |
Prereq |
MEM24007 |
Perform ultrasonic thickness testing |
* |
MEM24009 |
Perform basic radiographic testing |
* |
Qualification Mapping Information
Release 2. Supersedes and equivalent to MEM30522 Certificate III in Engineering - Technical (Release 1).
Release 1. Supersedes and is equivalent to MEM30505 Certificate III in Engineering - Technical.
Links
Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b7050d37-5fd0-4740-8f7d-3b7a49c10bb2