Modification History
Minor formatting and editorial changes made.
Unit Descriptor
This unit of competency is applicable to individuals with Certificate III or Certificate IV qualifications in allied trades (primarily automotive, electrotechnology or metals and engineering) who are to be employed in aviation maintenance workshops. It covers parts of common core competencies required of all individuals employed on the maintenance of items of aeronautical product that are aviation maintenance specific and would not have been covered in allied trade units that relate to similar areas of expertise. The unit is used in workplaces that operate under the airworthiness regulatory systems of the ADF and CASA. |
Application of the Unit
This unit of competency requires application of common core skills and knowledge that are aviation maintenance specific and meet the requirements of the two Regulators, CASA and the ADF. The skills and knowledge will be applied during the maintenance of items of aeronautical product in aviation maintenance workshops. |
Licensing/Regulatory Information
Not applicable.
Pre-Requisites
Not applicable
Employability Skills Information
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
1. Identify and access aviation industry manuals, specifications and drawings |
1.1. Appropriate manuals are identified and accessed for the type of aircraft or component to be maintained 1.2. Amendment status is clearly established to ensure the correct specifications and procedures are applied |
2. Amend manuals, specifications or drawings |
2.1. Manual, specification or drawing changes and/or amendments are incorporated and documented correctly in accordance with statutory regulations and /or enterprise procedures |
3. Store manuals, specifications or drawings |
3.1. Manuals, specifications or drawings are stored appropriately to ensure prevention of damage, ready access and updating of information, when required, in accordance with regulatory and/or enterprise procedures |
4. Apply standard trade practices |
4.1. Common types of aircraft attachment hardware are correctly selected and used 4.2. Common types of safety locking devices and fasteners are correctly selected and used 4.3. Aircraft components, devices and hardware are lockwired in the correct manner, using the appropriate wire gauge 4.4. Common types of aircraft connectors and plumbing are accurately assembled or connected |
5. Interpret and apply quality standards in the aviation maintenance environment |
5.1. Standards or specifications set out in maintenance documents and process specifications are identified and interpreted 5.2. Enterprise quality requirements are identified, confirmed and applied |
6. Plan steps and organise work to complete task |
6.1. Steps are planned in conjunction with the work of other personnel to allow achievement of practical outcomes, in accordance with relevant aircraft publications/maintenance regulations/orders and standards and practices 6.2. Human factors are allowed for in planning of steps 6.3. Work activity is organised with other involved personnel, allowing for relevant human factors and using relevant communication processes to ensure safe and appropriate sequencing of tasks 6.4. All necessary documentation related to job planning and progress is completed, and recorded in accordance with relevant aircraft publications/maintenance regulations/orders and standards and practices |
Required Skills and Knowledge
Required skills |
Look for evidence that confirms skills in:
|
Required knowledge |
Look for evidence that confirms knowledge of:
|
Evidence Guide
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. |
|
Overview of assessment |
A person who demonstrates competency in this unit must be able to correctly apply common core skills and knowledge covered by this unit that are specific to the maintenance of items of aeronautical product in aviation maintenance workshops. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
This unit must be linked in its assessment and application to those units that apply to actual maintenance of items of aeronautical product. It is essential that all OHS requirements are met and understood. The transferability of general manual interpretation and use in accordance with relevant aircraft component publications/maintenance regulations/orders and standards and practices must be clearly established. Evidence of underlying knowledge and skills associated with the interpretation and use of manuals is required to supplement understanding of the structure and regulatory requirements associated with the aircraft maintenance environment in this area. Evidence of knowledge about how aircraft materials, standard items of hardware and fittings are used in component maintenance and the application of quality systems and work planning must be demonstrated. The ability to apply the skills and knowledge across a variety of applications must also be demonstrated. A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements of the unit of competency are being achieved under routine supervision on at least one manual from each of Groups 1, 2 and 3 listed in the Range Statement and on the tasks listed in Groups 4 to 7. This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry . |
Context of and specific resources for assessment |
Competency should be assessed in the work environment, or by use of simulated activities, covering the use of publications/maintenance regulations/orders and standards and practices, the application of aviation maintenance specific standard trade practices and of task planning and quality system application in the aeronautical product maintenance environment. This unit must be linked in its assessment and application to those that apply to the actual maintenance of items of aeronautical product. |
Method of assessment |
|
Guidance information for assessment |
Range Statement
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
|
Note |
Range statements listed below are numbered to facilitate specification of the assessment requirements included in the Evidence Guide |
Appropriate manuals |
Appropriate manuals may include: 1. Aircraft publications, maintenance instruction manuals, process specifications, servicing or service bulletins or structural repair manuals 2. Tooling or equipment manuals, manufacturer's manuals, standard practices, enterprise aviation regulations and publications 3. Illustrated parts catalogues, aircraft wiring manuals or drawings |
Application of standard aviation trade practices |
Application of standard aviation trade practices applies to the selection and use of hand and power tools and equipment associated with workshop-related activities in the aircraft maintenance environment that involve: 4. Laying out and fabricating simple items from common aircraft materials 5. Assembling items using a representative range of common types of aircraft attachment hardware for which relevant fits and clearances, appropriate safety locking devices and fasteners, including lockwire, are correctly selected and applied 6. Assembling/connecting a range of common aircraft connectors and plumbing, applying safety locking devices where applicable 7. Assembling/connecting aircraft control cables and applying safety locking devices where applicable |
Regulatory and enterprise procedures |
Regulatory and enterprise procedures may be found in:
|
Human factors |
Human factors are:
|
Documentation |
Documentation may include:
|
Unit Sector(s)
Aviation maintenance
Competency field
Co-requisite units
MEA108B |
Complete aviation maintenance industry documentation |