Modification History
LMFGG2002B updated to LMTFA301B Apply First Aid.
Description
This qualification describes the skills and knowledge required to perform basic coopering tasks involving known routines and procedures and some accountability for the quality of outcomes.
Job roles /employment outcomes
The LMF21308 Certificate II in Coopering reflects vocational outcomes for those performing timber barrel construction with metal fixings and can include basic welding techniques.
Application
This qualification is typically used to develop skills and knowledge in barrel construction where there is a clearly defined range of contexts in which the choice of actions required is usually clear and there is limited complexity in the range of options to be applied. It could include collaboration with others through members of a group or team.
Pathways into the qualification
This qualification may be accessed by direct entry. Credit can be granted towards this qualification by those who have completed LMF10108 Certificate I in Furnishing or achieved equivalent industry experience.
Pathways from the qualification
Further training pathways from this qualification may include LMF31308 Certificate III in Coopering and relevant supervisory, management or competitive manufacturing qualifications.
Licensing considerations
There are no specific licences that relate to this qualification. However, depending on the jurisdiction, licensing or regulatory requirements may apply to the use of some units in this qualification. Local regulations should be checked for details.
Pathways Information
Not applicable.
Licensing/Regulatory Information
Not applicable.
Entry Requirements
Not applicable.
Employability Skills Summary
EMPLOYABILITY SKILLS QUALIFICATION SUMMARY |
|
Employability Skill |
Industry /enterprise requirements for this qualification include : |
Communication |
|
Teamwork |
|
Problem-solving |
|
Initiative and enterprise |
|
Planning and organising |
|
Self-management |
|
Learning |
|
Technology |
|
Packaging Rules
Packaging Rules
To be awarded the LMF21308 Certificate II in Coopering, competency must be achieved in thirteen (13 ) units of competency.
- six (6 ) core units of competency
- seven (7 ) elective units of competency.
Note: Where prerequisite units apply, these have been listed, and must be considered in the total number of units.
CORE UNITS
Complete all six (6 ) units from this list.
Unit code |
Unit title |
Prerequisites |
LMFCP2001A |
Use coopering sector hand and power tools |
|
MSAENV272B |
Participate in environmentally sustainable work practices |
|
MSAPMOHS100A |
Follow OHS procedures |
|
MSAPMOPS101A |
Make measurements |
|
MSAPMSUP102A |
Communicate in the workplace |
|
MSAPMSUP106A |
Work in a team |
ELECTIVE UNITS
Select seven (7 ) units from Groups A, B and C as specified below.
Group A
Select a minimum of two (2 ) units from Group A
Unit code |
Unit title |
Prerequisites |
LMFCP2002A |
Produce barrels using non-fired processes |
|
LMFFM2006B |
Hand make timber joints |
|
LMFFM2010B |
Set up, operate and maintain basic static machines |
Group B
Select a minimum of two (2 ) units from Group B
Unit code |
Unit title |
Prerequisites |
LMFFF2004B |
Prepare surfaces for finishing |
|
LMFFM2002B |
Assemble furnishing components |
|
LMFFM2003B |
Select and apply hardware |
|
LMFFM2005B |
Join solid timber |
|
LMFFM2007B |
Follow plans to assemble production furniture |
|
LMFFM2012B |
Set up, operate and maintain pressure and clamping machines |
|
HLTFA301B |
Apply First Aid |
|
LMFGN2002B |
Move and store materials and products |
|
MEM05007C |
Perform manual heating and thermal cutting |
|
MEM05012C |
Perform routine manual metal arc welding |
|
MEM05050B |
Perform routine gas metal arc welding |
|
MEM06001B |
Perform hand forging |
|
MEM18001C |
Use hand tools |
|
TLID207C |
Shift a load using manually operated equipment |
|
TLID307E |
Handle dangerous goods/hazardous substances |
Group C
Up to three (3 ) relevant units may be chosen from units not already selected from Groups A and B, or units available in this Training Package or other endorsed Training Packages and accredited courses aligned at Certificate II level.
Units selected from other Training Packages and accredited courses via Group B must be relevant to the qualification outcome and not duplicate units available within this qualification.
If Competitive Manufacturing units are chosen (identified as MSACM in the code), these should only be selected on the basis of work requirements.