Modification History
Glass and glazing units of competency, coded LMFGG, updated to Version C.
Description
This qualification describes the skills and knowledge required to perform basic furnishing industry tasks used in a range of industry job roles involving given routines and procedures and limited accountability for the quality of outcomes.
Job roles /employment outcomes
The LMF10108 Certificate I in Furnishing reflects vocational outcomes for those performing operational duties in a furnishing enterprise supporting others.
Application
This qualification is typically used to develop skills and knowledge in basic furnishing techniques that may include a variety of employment-related skills including preparatory access and participation skills, broad-based induction skills and/or specific workplace skills. It may also include participation in a team or work group.
Pathways into the qualification
This qualification may be accessed by direct entry. Credit can be granted towards this qualification by those who have achieved equivalent industry experience.
Pathways from the qualification
Further training pathways from this qualification may include a Certificate II or III Furnishing qualification.
Exemptions applying to Certificate I
The furnishing industry recognises the needs of participants with special training and employment needs, and wishes to support State and Territory equity objectives of facilitating meaningful and recognised vocational training. A special training and employment needs exemption within Certificate I requirements may be granted to those participants by RTOs. This exemption is in respect of core unit MSAPMOPS101A Make measurements. The total requirement of six units must still be satisfied by the substitution of a unit from the sector specialist unit inventory.
At the discretion of RTOs, for those already in the picture framing workforce but not yet having qualifications, LMFPF1001B Frame a simple artwork, may be replaced for Certificate I purposes by another sector specialist unit.
If Certificate I is being applied in an Interior Design and Decoration context, please note LMFID1001A Plan the decoration of a simple space cannot be used as a credit unit for future training.
Licensing considerations
There are no specific licences that relate to this qualification. However, depending on the jurisdiction, licensing or regulatory requirements may apply to the use of some units in this qualification. Local regulations should be checked for details.
Pathways Information
Not applicable.
Licensing/Regulatory Information
Not applicable.
Entry Requirements
Not applicable.
Employability Skills Summary
EMPLOYABILITY SKILLS QUALIFICATION SUMMARY |
|
The following Table contains a summary of the employability skills as identified by the furnishing industries for this qualification. This Table should be interpreted in conjunction with the detailed requirements of each unit of competency packaged in this qualification. The outcomes described here are broad industry requirements that reflect skill requirements for this level. |
|
Employability Skill |
Industry /enterprise requirements for this qualification include : |
Communication |
|
Teamwork |
|
Problem-solving |
|
Initiative and enterprise |
|
Planning and organising |
|
Self-management |
|
Learning |
|
Technology |
|
Packaging Rules
Packaging Rules
To be awarded the LMF10108 Certificate I in Furnishing, competency must be achieved in seven (7 ) units of competency.
- four (4 ) core units of competency
- three (3 ) elective units of competency.
Note: Where prerequisite units apply, these have been listed, and must be considered in the total number of units. No LMF unit aligned initially at Certificate I has prerequisite requirements.
CORE UNITS
Complete all four (4 ) units from this list:
Unit code |
Unit title |
Prerequisites |
MSAPMOHS100A |
Follow OHS procedures |
|
MSAPMOPS101A |
Make measurements |
|
MSAPMSUP102A |
Communicate in the workplace |
|
MSAPMSUP106A |
Work in a team |
ELECTIVE UNITS
Select three (3 ) elective units from Groups A, B or C as specified below.
Group A
Select one (1 ) specialist unit from Group A.
Unit code |
Unit title |
Prerequisites |
LMFBA1001A |
Construct a basic roll up blind |
|
LMFFF1001B |
Complete a basic furniture finishing product |
|
LMFFL1001A |
Complete simple floor covering installation |
|
LMFFM1001B |
Construct a basic timber furnishing product |
|
LMFFM1002B |
Operate basic woodworking machines |
|
LMFGG1001C |
Complete a basic glass and glazing project |
|
LMFID1001A |
Plan the decoration of a simple space |
|
LMFMB1001B |
Construct a basic mattress and base product |
|
LMFPF1001B |
Frame a simple artwork |
|
LMFSF1001B |
Produce basic soft furnishing accessories |
|
LMFUP1001B |
Complete a basic upholstery project |
Group B
Select a minimum of one (1 ) elective unit from the specialist sector units listed below from the same industry sector as the unit chosen from Group A.
Furniture Finishing
Unit code |
Unit title |
Prerequisites |
LMFFF2001B |
Use furniture finishing sector hand and power tools |
|
LMFFF2002B |
Dismantle/re-assemble furniture |
|
LMFFF2003B |
Remove surface coatings |
|
LMFFF2004B |
Prepare surfaces for finishing |
|
LMFFF2005B |
Maintain spray equipment and booth |
|
LMFFF2006B |
Apply surface coatings by spray gun |
|
LMFFF2007B |
Apply stains, fillers and bleach |
|
LMFFF2008B |
Apply surface coatings by hand |
Furniture Making
Unit code |
Unit title |
Prerequisites |
LMFFM2001B |
Use furniture making sector hand and power tools |
|
LMFFM2002B |
Assemble furnishing components |
|
LMFFM2003B |
Select and apply hardware |
|
LMFFM2004B |
Apply sheet laminates by hand |
|
LMFFM2005B |
Join solid timber |
|
LMFFM2006B |
Hand make timber joints |
|
LMFFM2007B |
Follow plans to assemble production furniture |
|
LMFFM2008B |
Bend and form cane |
|
LMFFM2009B |
Construct cane furniture |
|
LMFFM2010B |
Set up, operate and maintain basic static machines |
|
LMFFM2011B |
Apply manufactured board conversion techniques |
|
LMFFM2012B |
Set up, operate and maintain pressure and clamping machines |
Coopering (note that an LMFFM unit listed above may be chosen for this sector)
Unit code |
Unit title |
Prerequisites |
LMFCP2001A |
Use coopering sector hand and power tools |
|
LMFCP2002A |
Produce barrels using non-fired processes |
Glass and Glazing
Unit code |
Unit title |
Prerequisites |
LMFGG2001C |
Use glass and glazing sector hand and power tools |
|
HLTFA301B |
Apply First Aid |
|
LMFGG2003C |
Operate glass freefall rack and Table |
|
LMFGG2004C |
Process thin glass by hand |
|
LMFGG2005C |
Move glass sheets by hand |
|
LMFGG2006C |
Move single glass sheets by mechanical means |
|
LMFGG2007C |
Process glass by basic machines |
|
LMFGG2008C |
Glaze/re-glaze residential windows and doors |
|
LMFGG2009C |
Fabricate and assemble metal frames |
|
LMFGG2010C |
Fabricate and install insect and security screens |
Mattress and Base Making
Unit code |
Unit title |
Prerequisites |
LMFMB2001B |
Use mattress and base sector hand and power tools |
|
LMFMB2002B |
Prepare and assemble base unit |
|
LMFMB2003B |
Assemble mattress components |
|
LMFMB2004B |
Cut mattress and base fabrics |
Picture Framing
Unit code |
Unit title |
Prerequisites |
LMFPF2001B |
Use picture framing sector hand and power tools |
|
LMFPF2002B |
Cut mouldings to length |
|
LMFPF2003B |
Join mouldings |
|
LMFPF2004B |
Mount artwork |
|
LMFPF2005B |
Cut mat boards |
|
LMFPF2006B |
Cut and handle glazing materials for framing |
|
LMFPF2007B |
Assemble artwork package (basic) |
|
LMFPF2008B |
Recognise and repair finishes of framing materials |
Soft Furnishings
Unit code |
Unit title |
Prerequisites |
LMFSF2001B |
Cut single layer fabrics |
|
LMFSF2002B |
Machine sew materials |
|
LMFSF2003B |
Machine sew using specific techniques |
|
LMFSF2004B |
Hand sew soft furnishings |
|
LMFSF2005B |
Operate a steam press |
|
LMFSF2006B |
Calculate fabric quantities for window coverings |
|
LMFSF2007B |
Construct unlined curtains/drapes |
|
LMFSF2008B |
Construct lined curtains/drapes |
|
LMFSF2009B |
Construct padded pelmets |
|
LMFSF2010B |
Make up tracks for window coverings |
|
LMFSF2011B |
Fit and adjust curtain hardware |
|
LMFSF2012B |
Fit and adjust interior blinds |
|
LMFSF2013B |
Dress windows |
|
LMFSF2014B |
Use soft furnishing sector hand and power tools |
Upholstery
Unit code |
Unit title |
Prerequisites |
LMFUP2001B |
Use upholstery sector hand and power tools |
|
LMFUP2002B |
Fit upholstery components |
|
LMFUP2003B |
Apply contemporary foundations to upholstered furniture |
|
LMFUP2004B |
Machine sew upholstery final cover materials (basic) |
|
LMFUP2005B |
Develop cutting plan and cut single layer upholstery fabric |
|
LMFUP2006B |
Dismantle/re-assemble furniture for upholstering |
Flooring Technology
Unit code |
Unit title |
Prerequisites |
LMFFL2001A |
Use flooring technology sector hand and power tools |
|
LMFFL2002A |
Receive and prepare floor covering materials for installation |
|
LMFFL2003A |
Select, operate and maintain floor covering cutting machine |
|
LMFFL2004A |
Moisture test timber and concrete |
|
LMFFL2101A |
Remove existing floor coverings |
|
LMFFL2102A |
Prepare, select and apply smoothing and patching compounds |
|
LMFFL2103A |
Select and apply appropriate compounds and additives |
|
LMFFL2104A |
Prepare concrete sub-floors using wet cleaning methods |
|
LMFFL2105A |
Select, prepare and apply moisture barriers and damp proof membranes to concrete sub-floors |
|
LMFFL2106A |
Prepare walls for covering |
|
LMFFL2107A |
Select, operate and maintain grinding equipment |
|
LMFFL2108A |
Select, operate and maintain shot blasting equipment |
|
LMFFL2109A |
Select, operate and maintain demolition equipment |
|
LMFFL2110A |
Select, operate and maintain scarifying equipment |
|
LMFFL2111A |
Coarse sand timber flooring |
|
LMFFL2112A |
Install hard underlays |
|
LMFFL2201A |
Install carpet cushion/underlays and gripper accessories |
|
LMFFL2202A |
Install unpatterned tufted and bonded carpet floor coverings |
|
LMFFL2203A |
Install carpet tiles using standard installation procedures |
|
LMFFL2204A |
Install unpatterned tufted and bonded carpet floor coverings to stairs |
|
LMFFL2301A |
Install lay flat vinyl floor coverings |
|
LMFFL2302A |
Install resilient tiles using standard installation procedures |
|
LMFFL2501A |
Install laminate and engineered timber flooring |
|
LMFFL2502A |
Install impact and sound absorption underlay |
|
LMFFL2503A |
Nail strip timber flooring |
|
LMFFL2504A |
Install expansion joints |
|
LMFFL2505A |
Install mouldings and edge trims to timber flooring |
Blinds and Awnings
Unit code |
Unit title |
Prerequisites |
LMFBA2001A |
Use blinds and awnings sector hand and power tools |
|
LMFBA2002A |
Set up, operate and maintain blinds and awnings sector static machines |
|
LMFBA2004A |
Select and apply blinds and awnings sector hardware and fixings |
|
LMFBA2005A |
Construct roll up and pull down style blinds and awnings |
|
LMFBA2006A |
Construct vertical style blinds |
|
LMFBA2007A |
Construct textiles for canopy-style awnings |
|
LMFBA2008A |
Construct plastic and timber Venetian-style blinds |
|
LMFBA2009A |
Construct aluminium Venetian-style blinds |
|
LMFBA2010A |
Construct metal louvre and canopy hooded style awnings |
|
LMFBA2011A |
Construct aluminium roll up style awnings |
Interior Design & Decoration
Unit code |
Unit title |
Prerequisites |
BSBDES201A |
Follow a design process |
|
BSBDES202A |
Evaluate the nature of design in a specific industry context |
|
BSBDES301A |
Explore the use of colour |
Group C
A maximum of one (1 ) relevant unit may be chosen from Group C.
Unit code |
Unit title |
Prerequisites |
MSAENV272B |
Participate in environmentally sustainable work practices |
|
One unit may be chosen from units not selected in Group B, units available in this Training Package or from other endorsed Training Packages and accredited courses. The units must be aligned at Certificate I or II level. If a Competitive Manufacturing units is chosen (identified as MSACM in the code), these should only be selected on the basis of work requirements. |
A unit selected from another Training Package or accredited course via Group C must be relevant to the qualification outcome and not duplicate units available within this qualification.