Modification History
Not Applicable
Unit Descriptor
Unit descriptor |
This unit covers the competence to test for normal operation electrical componentry which is incidental to body repair activities, such as rear vision mirrors, telephone and radio antennas, central locking systems, air bag sensors, air bag actuators and deployment systems, rain sensors, light sensors, alarm components, batteries and computer control units. |
Application of the Unit
Application of the unit |
Licensing/Regulatory Information
Not Applicable
Pre-Requisites
Prerequisite units |
||
Employability Skills Information
Employability skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1. Gather information on electrical componentry in motor vehicles |
1.1. Customer requirements are checked following workplace procedures 1.2. Work instructions are used to determine job requirements, including method, material and equipment 1.3. OHS requirements, including handling of broken glass, dust and fume collection, breathing apparatus and eye and ear personal protection needs are observed throughout the work 1.4. Tooling and equipment are checked prior to use, for conformity with specifications and safe use 1.5. Condition of system is determined by visual, aural and tactile inspections and measurements 1.6. Conditions found are compared with electrical componentry in motor vehicles system specifications and customer use requirements 1.7. Correct information is accessed and interpreted from manufacturer/component supplier specifications |
2. Plan operations where electrical components are incidental to a body repair activity |
2.1. Planned operation sequence and availability of tooling and equipment is determined 2.2. Planned operation sequence includes post-service testing and checking procedure 2.3. Material list is prepared and availability determined 2.4. Tooling and equipment are selected to meet job requirements 2.5. Tooling and equipment are regularly checked to ensure they are in good working order 2.6. Tooling and equipment are handled in accordance with OHS requirements 2.7. Daily maintenance of tooling is performed as specified by enterprise |
3. Remove electrical/ electronic operated components |
3.1. Removal or relocation of electrically operated componentry is completed without causing damage to component or system 3.2. Correct information is accessed and interpreted from manufacturer/component supplier specifications 3.3. Electrically operated components are removed using approved methods, tooling and equipment 3.4. Removal activities are carried out according to industry regulations/guidelines, OHS, legislation and enterprise procedures/policies |
4. Refit and/or test electrically operated componentry involved in body repair activities |
4.1. Customer requirements and electrical componentry specifications are checked following incidental body repair activities 4.2. Electrically operated units/components are refitted using approved methods, tooling and equipment 4.3. Electrically operated componentry is operated through its full range after a body repair activity, noting test results, including non-conformity 4.4. Electrically operated componentry and adjustments are checked and prepared for delivery after a body repair activity 4.5. Portable tooling and equipment are stored in approved designated areas 4.6. Workplace documents, customer file and warranty information is updated, as required |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
This section describes the skills and knowledge required for this unit. |
Required skills |
|
Required knowledge |
|
Evidence Guide
EVIDENCE GUIDE |
|
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. |
|
Overview of assessment |
|
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
It is essential that competence is fully observed and there is ability to transfer competence to changing circumstances and to respond to unusual situations in the critical aspect of:
|
Context of , and specific resources for assessment |
Underpinning knowledge and skills may be assessed on or off the job. Assessment of practical skills must take place after a period of supervised practice and repetitive experience. If workplace conditions are not available, assessment in simulated workplace conditions is acceptable. Prescribed outcomes must be able to be achieved without direct supervision. The following resources should be made available:
|
Method of assessment |
Practical assessments:
|
Guidance information for assessment |
Range Statement
RANGE STATEMENT |
|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
|
Unit scope |
This unit of competence applies to, but is not limited to:
|
Repair methods |
Repair methods include
Specific requirements may include:
|
OHS requirements |
OHS practices must abide by:
|
Information /documents |
Sources of information/documents may include:
|
Unit Sector(s)
Unit sector |
Electrical |
Co-requisite units
Co-requisite units |
||
Competency field
Competency field |