Modification History
Release 3. This is the second release of this qualification in the UEE Electrotechnology Training Package. Modifications include:
Release 2. Updated superseded elective units. Release 1. This is the first release of this qualification in the UEE Electrotechnology Training Package. |
Qualification Description
This qualification covers competencies to design and validate and/or evaluate process control equipment and systems, manage risk, estimate and manage projects and provide technical advice or sales. It also provides competencies to install, set up, test, develop, select, commission, maintain, and diagnose faults or malfunctions of equipment and systems. No licensing, legislative or certification requirements apply to this qualification at the time of publication. |
Entry Requirements
There are no entry requirements for this qualification |
Packaging Rules
A total of 2160 weighting points comprising: 1740 core weighting points listed below; plus 420 general elective weighting points from the general elective units listed below. Choose a total of 420 weighting points elective units from the list below, of which between 0 and 170 weighting points can be taken from Group A; and between 0 and 80 weighting points can be taken from Group B; and between 0 and 80 weighting points can be taken from Group C; and between 0 and 80 weighting points can be taken from Group D; and between 180 and 420 weighting points must be taken from Group E; or all 420 weighting points can be taken from Group E Up to 170 weighting points of the general elective units Group A, may be selected from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points, unless directed from the Electrotechnology Industry Reference Committee (IRC). There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol *. Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume. Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with. |
||
Core units |
Weighting Points |
|
UEECD0003 |
Apply industry and community standards to engineering activities |
20 |
UEECD0004 |
Apply material science to solving electrotechnology engineering problems |
60 |
UEECD0005 |
Apply physics to solving electrotechnology engineering problems |
60 |
UEECD0007 |
Apply work health and safety regulations, codes and practices in the workplace |
20 |
UEECD0010 |
Compile and produce an energy sector detailed report |
60 |
UEECD0014 |
Develop design briefs for electrotechnology projects |
40 |
UEECD0016 |
Document and apply measures to control WHS risks associated with electrotechnology work* |
20 |
UEECD0017 |
Establish and follow a competency development plan in an electrotechnology engineering discipline |
120 |
UEECD0019 |
Fabricate, assemble and dismantle utilities industry components* |
40 |
UEECD0020 |
Fix and secure electrotechnology equipment* |
20 |
UEECD0024 |
Implement and monitor energy sector WHS policies and procedures |
20 |
UEECD0026 |
Manage risk in electrotechnology activities |
60 |
UEECD0036 |
Provide engineering solutions for problems in complex multiple path circuits |
60 |
UEECD0039 |
Provide solutions to basic engineering computational problems* |
60 |
UEECD0043 |
Solve problems in direct current circuits* |
80 |
UEECD0045 |
Solve problems in multiple path extra-low voltage (ELV) a.c. circuits* |
40 |
UEECD0051 |
Use drawings, diagrams, schedules, standards, codes and specifications* |
40 |
UEECD0055 |
Write specifications for industrial electronics and control projects |
40 |
UEECD0056 |
Apply methods to maintain currency of industry developments |
20 |
UEECS0033 |
Use engineering applications software on personal computers |
40 |
UEEIC0013 |
Develop, enter and verify discrete control programs for programmable controllers* |
60 |
UEEIC0018 |
Diagnose and rectify faults in digital controls systems* |
60 |
UEEIC0020 |
Fault find and repair analogue circuits and components in electronic control systems* |
60 |
UEEIC0021 |
Find and rectify faults in process final control elements* |
40 |
UEEIC0022 |
Install instrumentation and control apparatus and associated equipment* |
20 |
UEEIC0023 |
Install instrumentation and control cabling and tubing* |
20 |
UEEIC0029 |
Set up and adjust PID control loops* |
40 |
UEEIC0030 |
Set up and adjust advanced PID process control loops* |
40 |
UEEIC0031 |
Set up and configure human-machine interface (HMI) and industrial networks* |
60 |
UEEIC0038 |
Solve problems in density/level measurement components and systems* |
40 |
UEEIC0039 |
Solve problems in flow measurement components and systems* |
40 |
UEEIC0041 |
Solve problems in pressure measurement components and systems* |
40 |
UEEIC0043 |
Solve problems in temperature measurement components and systems* |
40 |
UEEIC0047 |
Use instrumentation drawings, specifications, standards and equipment manuals* |
40 |
UEEIC0048 |
Verify compliance and functionality of instrumentation and control installations* |
40 |
UEEIC0049 |
Manage instrumentation and control projects* |
40 |
UEEIC0050 |
Plan instrumentation and control projects* |
60 |
UEERE0013 |
Develop strategies to address environmental and sustainability issues in the energy sector |
20 |
UEERL0004 |
Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring* |
60 |
Group A: Imported and common elective units |
Weighting Points |
|
BSBINS501 |
Implement information and knowledge management systems |
50 |
BSBLDR522 |
Manage people performance |
70 |
BSBSTR501 |
Establish innovative work environments |
50 |
BSBSTR502 |
Facilitate continuous improvement |
60 |
BSBTWK502 |
Manage team effectiveness |
60 |
Group B: General elective units |
Weighting Points |
|
ICTICT214 |
Operate application software packages |
20 |
UEECD0030 |
Prepare electrotechnology/utilities drawings using manual drafting and CAD equipment and software* |
60 |
UEECD0031 |
Prepare engineering drawings using manual drafting and CAD for electrotechnology applications* |
60 |
UEEEC0060 |
Repairs basic electronic apparatus faults by replacement of components* |
40 |
UEEEC0075 |
Troubleshoot single phase input d.c power supplies* |
40 |
UEEEL0007 |
Develop detailed electrical drawings* |
60 |
UEEHA0004 |
Enter a classified hazardous area to undertake work related to electrical equipment |
40 |
UEEHA0022 |
Determine the explosion-protection requirements to meet a specified classified hazardous area* |
40 |
UEEHA0025 |
Install explosion-protected equipment and associated apparatus and wiring systems* |
60 |
UEEHA0026 |
Maintain equipment associated with hazardous areas* |
60 |
UEEIC0004 |
Calibrate, adjust and test measuring instruments* |
40 |
UEEIC0033 |
Set up gas analysis measuring and control instruments* |
20 |
UEEIC0035 |
Set up scientific analysis measuring and control instruments* |
20 |
UEEIC0036 |
Set up water analysis measuring and control instruments* |
20 |
UEEIC0037 |
Set up weighting measuring and control instruments* |
20 |
UEEIC0045 |
Troubleshoot medical equipment control systems* |
120 |
UEEIC0046 |
Troubleshoot process control systems* |
60 |
Group C: General elective units |
Weighting Points |
|
UEECD0032 |
Produce detailed electrotechnology/utilities drawings using CAD equipment and software* |
60 |
UEECO0001 |
Estimate electrotechnology projects |
40 |
UEEHA0020 |
Conduct detailed inspection of electrical installations for hazardous areas* |
40 |
UEEHA0038 |
Conduct visual and close inspection of electrical installations for hazardous areas* |
40 |
UEEIC0003 |
Assist in commissioning process and instrumentation control systems* |
40 |
UEEIC0012 |
Develop structured programs to control external devices* |
40 |
UEEIC0014 |
Develop, enter and verify programs in supervisory control and data acquisition systems* |
60 |
UEEIC0015 |
Develop, enter and verify word and analogue control programs for programmable logic controllers* |
60 |
UEEIC0026 |
Provide solutions to fluid circuit operations* |
60 |
UEEIC0027 |
Provide solutions to pneumatic-hydraulic system operations* |
80 |
UEEIC0042 |
Solve problems in single phase electronic power control circuits* |
60 |
UEEIC0044 |
Troubleshoot measuring and analysis systems* |
40 |
Group D: General elective units |
Weighting Points |
|
ICTNWK426 |
Install and configure client-server applications and services |
60 |
ICTPRG534 |
Deploy applications to production environments |
40 |
ICTPRG549 |
Apply intermediate object-oriented language skills |
60 |
ICTTEN409 |
Commission an electronic system |
50 |
ICTWEB447 |
Build basic website using development software and ICT tools |
20 |
UEECO0014 |
Prepare tender submissions for electrotechnology projects* |
60 |
UEECS0004 |
Commission industrial computer systems* |
20 |
UEECS0014 |
Develop computer network services* |
120 |
UEECS0019 |
Develop, implement and test object-oriented code* |
140 |
UEECS0025 |
Modify/redesign industrial computer systems* |
20 |
UEECS0031 |
Set up, create and implement content for a web server* |
120 |
UEEEL0006 |
Develop detailed and complex drawings for electrical systems using CAD systems* |
60 |
UEEEL0011 |
Evaluate performance of low voltage electrical apparatus* |
40 |
UEEHA0029 |
Plan electrical installations for hazardous areas* |
20 |
UEEIC0001 |
Analyse complex electronic circuits controlling fluids |
80 |
UEEIC0005 |
Configure and maintain industrial control system networks* |
60 |
UEEIC0010 |
Develop and test code for microcontroller devices |
60 |
Group E: General elective units |
Weighting Points |
|
UEECD0001 |
Analyse materials for suitability in electrical equipment* |
80 |
UEECD0002 |
Analyse static and dynamic parameters of electrical equipment |
80 |
UEECD0012 |
Contribute to risk management in electrotechnology systems |
20 |
UEECD0015 |
Develop engineering solutions to photonic system problems* |
80 |
UEECD0037 |
Provide engineering solutions for uses of materials and thermodynamic effects |
80 |
UEECD0049 |
Use advanced computational processes to provide solutions to energy sector engineering problems* |
80 |
UEECO0003 |
Manage contract variations |
40 |
UEEEC0005 |
Assess electronic apparatus compliance |
60 |
UEEEC0011 |
Design and develop electronics/computer systems projects |
40 |
UEEEC0014 |
Design signal-conditioning sub-systems |
80 |
UEEEC0045 |
Modify digital signal processing (DSP) based sub-systems |
80 |
UEEHA0008 |
Design gas detection systems |
20 |
UEEIC0006 |
Design and configure Human-Machine Interface (HMI) networks |
60 |
UEEIC0007 |
Design and use advanced programming tools, PC networks and HMI Interfacing |
120 |
Qualification Mapping Information
This qualification replaces and is equivalent to UEE61511 Advanced Diploma of Instrumentation and Control Engineering |
Links
Companion Volume Implementation Guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b8a8f136-5421-4ce1-92e0-2b50341431b6