Modification History
Not Applicable
Unit Descriptor
Unit descriptor |
This unit covers estimating approximate answers to arithmetical problems, carrying out basic calculations involving percentages and proportions, and determining simple ratios and averages. The unit includes producing and interpreting simple charts and graphs. |
Application of the Unit
Application of the unit |
This unit applies in manufacturing, engineering or related environments. It includes the application of the four rules of algebraic expressions, extracting information from drawings, diagrams, graphs and charts and producing simple charts and graphs. Data may be derived from readings taken or may be computer generated. Applications can include computations associated with pressure, volume, temperature, heat, speed, power, elasticity, density, mass, force etc. Calculations may be performed using pen and paper or on a calculator. Band : A Unit Weight : 3 |
Licensing/Regulatory Information
Not Applicable
Pre-Requisites
Prerequisite units |
||
Employability Skills Information
Employability skills |
This unit contains employability skills. |
Elements and Performance Criteria Pre-Content
Elements describe the essential outcomes of a unit of competency. |
Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide. |
Elements and Performance Criteria
ELEMENT |
PERFORMANCE CRITERIA |
1. Determine work requirement |
1.1. Required outcomes are established from job instructions. 1.2. Data is obtained from relevant sources and interpreted correctly. 1.3. Required calculation method is determined to suit the application, including selection of relevant arithmetic operations and/or formulae. 1.4. Expected results are estimated, including rounding off, as appropriate. |
2. Perform calculations |
2.1. Calculation method is applied correctly. 2.2. Correct answer is obtained. 2.3. Answer is checked against estimation. |
3. Produce charts and graphs from given information |
3.1. Data is transposed accurately to produce charts or graphs. 3.2. Charts or graphs accurately reflect data on which they are based. |
Required Skills and Knowledge
REQUIRED SKILLS AND KNOWLEDGE |
This section describes the skills and knowledge required for this unit. |
Required skills |
Look for evidence that confirms skills in:
|
Required knowledge |
Look for evidence that confirms knowledge of:
|
Evidence Guide
EVIDENCE GUIDE |
|
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package. |
|
Overview of assessment |
A person who demonstrates competency in this unit must be able to perform computations. |
Critical aspects for assessment and evidence required to demonstrate competency in this unit |
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts. |
Context of and specific resources for assessment |
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate. This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with performing computations or other units requiring the exercise of the skills and knowledge covered by this unit. |
Method of assessment |
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit of competency. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials. |
Guidance information for assessment |
Range Statement
RANGE STATEMENT |
|
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included. |
|
Relevant sources |
Charts, graphs, diagrams, measurement data, reference manuals and specifications |
Application |
Applications can include computations associated with pressure, volume, temperature, heat, speed, power, elasticity, density, mass, force etc. |
Arithmetic operations |
|
Charts and graphs |
Simple histograms, control charts, pie charts etc. |
Unit Sector(s)
Unit sector |
Co-requisite units
Co-requisite units |
||
Competency field
Competency field |
Measurement |