UEE42611 Certificate IV in Hazardous areas - Electrical

Release: 1

UEE42611 Certificate IV in Hazardous areas - Electrical

Modification History

Not applicable.

Description

Scope

This qualification provides competencies to supervise selection, installation, commissioning maintenance and testing of explosion-protected equipment and systems for control and monitoring of plant and processes. The qualification provides competencies in working with explosion protections techniques with elections in how they apply to coal mining, gas and dust atmospheres. It includes ERAC requirements for an ‘Electrician’s licence’ and competencies to select, install, set up, test, fault find, repair and maintain stand alone renewable energy equipment and systems.

Pathways Information

Not applicable.

Licensing/Regulatory Information

Not applicable.

Entry Requirements

Not applicable.

Employability Skills Summary

Not applicable.

Packaging Rules

Completion requirements

The requirements for granting this qualification will be met when competency is demonstrated and achieved for:

All the Core competency standard units, defined in the Core Competency Standard Units table below and

A combination of Elective competency standard units to achieve a total weighting of 300 points in accordance with the Elective Competency Standard Units table below.

Note: UEENEEG105A - Those holding an ‘Unrestricted Electricians Licence or equivalent issued in an Australian State or Territory meets the requirements of this unit and its pre-requisite requirements.

Core Competency Standard Units All Core competency standard units to be achieved	Weighting Points
UEENEEE038B	Participate in development and follow a personal competency development plan	20
UEENEEE101A	Apply Occupational Health Safety regulations, codes and practices in the workplace	20
UEENEEE102A	Fabricate, dismantle, assemble of utilities industry components	40
UEENEEE104A	Solve problems in d.c. circuits	80
UEENEEE105A	Fix and secure electrotechnology equipment	20
UEENEEE107A	Use drawings, diagrams, schedules, standards, codes and specifications	40
UEENEEE117A	Implement and monitor energy sector OHS policies and procedures	20
UEENEEE124A	Compile and produce an energy sector detailed report	60
UEENEEE137A	Document and apply measures to control OHS risks associated with electrotechnology work	20
UEENEEG006A	Solve problems in single and three phase low voltage machines	80
UEENEEG033A	Solve problems in single and three phase low voltage electrical apparatus and circuits	60
UEENEEG063A	Arrange circuits, control and protection for general electrical installations	40
UEENEEG101A	Solve problems in electromagnetic devices and related circuits	60
UEENEEG102A	Solve problems in low voltage a.c. circuits	80
UEENEEG103A	Install low voltage wiring and accessories	20
UEENEEG104A	Install appliances, switchgear and associated accessories for low voltage electrical installations	20
UEENEEG105A	Verify compliance and functionality of low voltage general electrical installations	40
UEENEEG106A	Terminate cables, cords and accessories for low voltage circuits	40
UEENEEG107A	Select wiring systems and cables for low voltage general electrical installations	60
UEENEEG108A	Trouble-shoot and repair faults in low voltage electrical apparatus and circuits	40
UEENEEG109A	Develop and connect electrical control circuits	80
UEENEEK145A	Implement and monitor energy sector policies and procedures for environmental and sustainable work practices	20
UEENEEM080A	Report on the integrity of explosion-protected equipment in a hazardous areas	20
Total points in core	980

Elective Competency Standard Units Complete Elective units to achieve a total of weighting of 300 points from the following groups:
Group	Minimum points	Maximum points
A	Imported and Common Elective Units Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 4. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.	0	60
B	Qualification Elective Units	0	80
C	Qualification Elective Units You may select all your elective units from this Group	220	300

Group A – Imported and Common Elective Units You may complete units to a maximum weighting of 60	Weighting Points
UEENEEC001B	Maintain documentation	20
UEENEEC002B	Source and purchase material/parts for installation or service jobs	20
UEENEEC003B	Provide quotations for installation or service jobs	20
UEENEEC010B	Deliver a service to customers	20
UEENEED101A	Use basic computer applications relevant to a energy sector workplace	20
UEENEEE009B	Comply with scheduled and preventative maintenance program processes	20
UEENEEE020B	Provide basic instruction in the use of electrotechnology apparatus	20
CPCCOHS1001A	Work safely in the construction industry	10
HLTCPR201B	Perform CPR	10
Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 4. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. Note: For further information see Application of the NQC Flexibility Formula, UEE11 Electrotechnology Training Package, Version 1, Volume 1 Qualification Framework	Up to 60 points
Group B – Qualification Elective Units You may complete units to a maximum weighting of 80	Weighting Points
UEENEEM019A	Attend to breakdowns in hazardous areas — coal mining	20
UEENEEM020A	Attend to breakdowns in hazardous areas — gas atmospheres	20
UEENEEM021A	Attend to breakdowns in hazardous areas — dust atmospheres	20
UEENEEM022A	Attend to breakdowns in hazardous areas — pressurisation	20
UEENEEM023A	Install explosion-protected equipment and wiring systems — coal mining	60
UEENEEM024A	Install explosion-protected equipment and wiring systems — gas atmospheres	60
UEENEEM025A	Install explosion-protected equipment and wiring systems — dust atmospheres	60
UEENEEM026A	Install explosion-protected equipment and wiring systems — pressurisation	60
UEENEEM027A	Maintain equipment in hazardous areas — coal mining	60
UEENEEM028A	Maintain equipment in hazardous areas — gas atmospheres	60
UEENEEM029A	Maintain equipment in hazardous areas — dust atmospheres	60
UEENEEM030A	Maintain equipment in hazardous areas — pressurisation	60
UEENEEM031A	Overhaul and repair of explosion-protected equipment — coal mining	60
UEENEEM032A	Overhaul and repair of explosion-protected equipment — flameproof enclosures	60
UEENEEM033A	Overhaul and repair of explosion-protected equipment — gas atmospheres	60
UEENEEM034A	Overhaul and repair of explosion-protected equipment — dust atmospheres	40
UEENEEM060A	Carry out overhaul and repair of explosion-protected equipment — coal mining	60
UEENEEM061A	Carry out overhaul and repair of explosion-protected equipment — flameproof enclosures	60
UEENEEM062A	Carry out overhaul and repair of explosion-protected equipment — gas atmospheres	60
UEENEEM063A	Carry out overhaul and repair of explosion-protected equipment — dust atmospheres	60
UEENEEM070A	Repair reeling, trailing and flexible cables	60
UEENEEM071A	Test reeling, trailing and flexible cables	60
UEENEEM072A	Inspect and fit plugs/couplers for reeling, trailing and flexible cables	60
UEENEEM073A	Verify compliance of repaired reeling, trailing and flexible cables	60
UEENEEM076A	Use and maintain the integrity of a portable gas detection device	20
UEENEEM077A	Install and maintain the integrity of fixed gas detection equipment	20

Group C – Qualification Elective Units You must complete units to a minimum weighting of 220 You may select all your elective units from this Group	Weighting Points
UEENEEM038A	Conduct testing of hazardous areas installations — coal mining	40
UEENEEM039A	Conduct testing of hazardous areas installations — gas atmospheres	40
UEENEEM040A	Conduct testing of hazardous areas installations — dust atmospheres	40
UEENEEM041A	Conduct testing of hazardous area installations — pressurisation	40
UEENEEM042A	Conduct visual inspection of hazardous areas installations	40
UEENEEM043A	Conduct detailed inspection of hazardous areas installations — coal mining	40
UEENEEM044A	Conduct detailed inspection of hazardous areas installations — gas atmospheres	40
UEENEEM045A	Conduct detailed inspection of hazardous areas installations — dust atmospheres	40
UEENEEM046A	Conduct detailed inspection of hazardous areas installations — pressurisation	40
UEENEEM047A	Develop and manage maintenance programs for hazardous areas electrical equipment — coal mining	20
UEENEEM048A	Develop and manage maintenance programs for hazardous areas electrical equipment — gas atmospheres	20
UEENEEM049A	Develop and manage maintenance programs for hazardous areas electrical equipment — dust atmospheres	20
UEENEEM050A	Develop and manage maintenance programs for hazardous areas electrical equipment — pressurisation	20
UEENEEM054A	Plan electrical installations for hazardous areas — gas atmospheres	20
UEENEEM055A	Plan electrical installations for hazardous areas — dust atmospheres	20
UEENEEM056A	Plan electrical installations for hazardous areas — pressurisation	20
UEENEEM074A	Plan electrical installations in hazardous areas — coal mining	20
UEENEEM078A	Manage compliance of hazardous areas	20

Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.

2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.

END OF QUALIFICATION

Custom Content Section

Not applicable.