UEE50920 Diploma of Industrial Electronics and Control Engineering

Release 1

UEE50920 Diploma of Industrial Electronics and Control Engineering

Modification History

Release 1. This is the first release of this qualification in the UEE Electrotechnology Training Package

Qualification Description

This qualification covers competencies to develop, select, commission, maintain and diagnose faults/malfunctions of equipment and systems for the monitoring and control of plant, machines and processes. No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Entry Requirements

The entry requirement for this qualification is: UEE30820 Certificate III in Electrotechnology Electrician OR a current ‘Unrestricted Electricians Licence’ or its equivalent issued in an Australian state or territory.

Packaging Rules

A total of 760 weighting points comprising: 280 core weighting points listed below; plus 480 general elective weighting points from the general elective units listed below. Choose a total of 480 weighting points elective units from the list below, of which between 0 and 220 weighting points can be taken from Group A; between 0 and 100 weighting points can be taken from Group B; between 0 and 120 weighting points can be taken from Group C; and between 260 and 480 weighting points can be taken from Group D (or all minimum 480 weighting points can be taken from Group D). Up to 220 weighting points of the general elective units Group A, may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points, unless directed from the Electrotechnology Industry Reference Committee (IRC). There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol *. Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume. Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with.
Core units	Weighting Points
UEECD0010	Compile and produce an energy sector detailed report	60
UEECD0024	Implement and monitor energy sector WHS policies and procedures	20
UEECD0027	Participate in development and follow a personal competency development plan	20
UEECD0055	Write specifications for industrial electronics and control projects	40
UEEIC0018	Diagnose and rectify faults in digital controls systems*	60
UEEIC0020	Fault find and repair analogue circuits and components in electronic control systems*	60
UEERE0013	Develop strategies to address environmental and sustainability issues in the energy sector	20
Group A: Imported and common elective units	Weighting Points
BSBCUS201	Deliver a service to customers	20
BSBINM501	Manage an information or knowledge management system	50
BSBINN502	Build and sustain an innovative work environment	50
BSBMGT502	Manage people performance	70
BSBMGT516	Facilitate continuous improvement	60
BSBWOR502	Lead and manage team effectiveness	60
ICTICT203	Operate application software packages	20
UEECD0011	Comply with scheduled and preventative maintenance program processes	20
UEECD0035	Provide basic instruction in the use of electrotechnology apparatus	20
UEECO0015	Provide quotations for installation or service jobs	20
UEECO0017	Source and purchase material/parts for installation or service jobs	20
Group B: General elective units	Weighting Points
UEECS0033	Use engineering applications software on personal computers	40
UEEEC0003	Assemble and set up basic security systems*	80
UEEEC0060	Repairs basic electronic apparatus faults by replacement of components*	40
UEEEC0075	Troubleshoot single phase input d.c power supplies*	40
UEEEL0004	Carry out basic repairs to electrical components and equipment*	40
UEEEL0045	Diagnose and rectify faults in traction lift systems*	80
UEEEL0046	Find and repair faults in LV d.c. electrical apparatus and circuits*	60
UEEEL0049	Install and maintain emergency safety systems*	60
UEEEL0053	Maintain operation of electrical marine equipment and systems*	60
UEEEL0054	Maintain operation of electrical mining equipment and systems*	60
UEEEL0055	Overhaul and repair major switchgear and control gear*	60
UEEIC0002	Assemble, enter and verify operating instructions in microprocessor equipped devices*	20
UEEIC0013	Develop, enter and verify discrete control programs for programmable controllers*	60
UEEIC0038	Solve problems in density/level measurement components and systems*	40
UEEIC0039	Solve problems in flow measurement components and systems*	40
UEEIC0041	Solve problems in pressure measurement components and systems*	40
UEEIC0043	Solve problems in temperature measurement components and systems*	40
UEEIC0047	Use instrumentation drawings, specifications, standards and equipment manuals*	40
Group C: General elective units	Weighting Points
UEECO0001	Estimate electrotechnology projects	40
UEECS0014	Develop computer network services*	120
UEEEL0007	Develop detailed electrical drawings*	60
UEEEL0027	Carry out low voltage electrical field testing and report findings*	60
UEEIC0012	Develop structured programs to control external devices*	40
UEEIC0014	Develop, enter and verify programs in supervisory control and data acquisition systems*	60
UEEIC0015	Develop, enter and verify word and analogue control programs for programmable logic controllers*	60
UEEIC0026	Provide solutions to fluid circuit operations*	60
UEEIC0027	Provide solutions to pneumatic-hydraulic system operations*	80
UEEIC0028	Provide solutions to problems in industrial control systems*	60
UEEIC0034	Set up industrial field control devices*	60
UEEIC0040	Solve problems in polyphase electronic power control circuits*	60
UEEIC0042	Solve problems in single phase electronic power control circuits*	60
Group D: General elective units	Weighting Points
UEECS0004	Commission industrial computer systems*	20
UEECS0019	Develop, implement and test object-oriented code*	140
UEECS0025	Modify/redesign industrial computer systems*	20
UEECS0031	Set up, create and implement content for a web server*	120
UEEEL0006	Develop detailed and complex drawings for electrical systems using CAD systems*	60
UEEEL0011	Evaluate performance of low voltage electrical apparatus*	40
UEEIC0005	Configure and maintain industrial control system networks*	60
UEEIC0010	Develop and test code for microcontroller devices	60
UEEIC0016	Diagnose and rectify faults in a.c. motor drive systems*	60
UEEIC0017	Diagnose and rectify faults in d.c. motor drive systems*	60
UEEIC0019	Diagnose and rectify faults in servo drive systems*	60

Qualification Mapping Information

This qualification replaces and is not equivalent to UEE50911 Diploma of Industrial Electronics and Control Engineering

Links

Companion Volume implementation guides are found in VETNet - - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b8a8f136-5421-4ce1-92e0-2b50341431b6