UEE40920 Certificate IV in Industrial Electronics and Control

Release 3

UEE40920 Certificate IV in Industrial Electronics and Control

Modification History

Release 3. Updated superseded HLT, BSB and ICT elective units. Release 2. This minor update is the second release of this qualification in the UEE Electrotechnology Training Package. One unit added to general electives. Imported elective units updated. Release 1. This is the first release of this qualification in the UEE Electrotechnology Training Package

Qualification Description

This qualification covers competencies to select, install, commission, fault find and maintain equipment and systems for the control of plant, machines and processes. No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Entry Requirements

The entry requirement for this qualification is: UEE30820 Certificate III in Electrotechnology Electrician or a current ‘Unrestricted Electricians Licence’ or its equivalent issued in an Australian state or territory.

Packaging Rules

A total of 440 weighting points comprising: 240 core weighting points listed below; plus 200 general elective weighting points from the general elective units listed below. Choose a total of 200 weighting points elective units from the list below, of which between 0 and 100 weighting points can be taken from Group A; and between 0 and 100 weighting points can be taken from Group B; and between 100 and 200 weighting points can be taken from Group C (or all minimum 200 weighting points can be taken from Group C). Up to 100 weighting points of the general elective units Group A, may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points, unless directed from the Electrotechnology Industry Reference Committee (IRC). There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol *. Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume. Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with.
Core units	Weighting Points
UEECD0010	Compile and produce an energy sector detailed report	60
UEECD0024	Implement and monitor energy sector WHS policies and procedures	20
UEECD0027	Participate in development and follow a personal competency development plan	20
UEEIC0018	Diagnose and rectify faults in digital controls systems*	60
UEEIC0020	Fault find and repair analogue circuits and components in electronic control systems*	60
UEERE0015	Implement and monitor energy sector environmental and sustainable policies and procedures	20
Group A: Imported and common elective units	Weighting Points
BSBOPS203	Deliver a service to customers	20
CPCCWHS1001	Prepare to work safely in the construction industry	10
HLTAID009	Provide cardiopulmonary resuscitation	10
ICTICT214	Operate application software packages	20
UEECD0011	Comply with scheduled and preventative maintenance program processes	20
UEECD0035	Provide basic instruction in the use of electrotechnology apparatus	20
UEECO0002	Maintain documentation	20
UEECO0015	Provide quotations for installation or service jobs	20
UEECO0017	Source and purchase material/parts for installation or service jobs	20
Group B: General elective units	Weighting Points
UEECD0030	Prepare electrotechnology/utilities drawings using manual drafting and CAD equipment and software*	60
UEECD0031	Prepare engineering drawings using manual drafting and CAD for electrotechnology applications*	60
UEECD0032	Produce detailed electrotechnology/utilities drawings using CAD equipment and software*	60
UEECD0050	Use and maintain the integrity of a portable gas detection device*	20
UEECS0033	Use engineering applications software on personal computers	40
UEEDV0005	Install and maintain cabling for multiple access to telecommunication services*	80
UEEDV0008	Install, modify and verify coaxial and structured communication copper cabling*	40
UEEEC0003	Assemble and set up basic security systems*	80
UEEEC0060	Repairs basic electronic apparatus faults by replacement of components*	40
UEEEC0075	Troubleshoot single phase input d.c power supplies*	40
UEEEL0046	Find and repair faults in LV d.c. electrical apparatus and circuits*	60
UEEEL0053	Maintain operation of electrical marine equipment and systems*	60
UEEEL0054	Maintain operation of electrical mining equipment and systems*	60
UEEHA0003	Determine the explosion-protection requirements to meet a specified classified hazardous area*	40
UEEHA0004	Enter a classified hazardous area to undertake work related to electrical equipment	40
UEEHA0005	Install explosion-protected equipment and associated apparatus and wiring systems*	60
UEEHA0006	Maintain equipment associated with hazardous areas*	60
UEEIC0002	Assemble, enter and verify operating instructions in microprocessor equipped devices*	20
UEEIC0013	Develop, enter and verify discrete control programs for programmable controllers*	60
UEEIC0038	Solve problems in density/level measurement components and systems*	40
UEEIC0039	Solve problems in flow measurement components and systems*	40
UEEIC0041	Solve problems in pressure measurement components and systems*	40
UEEIC0043	Solve problems in temperature measurement components and systems*	40
UEEIC0047	Use instrumentation drawings, specifications, standards and equipment manuals*	40
UEERE0050	Identify and isolate multiple supply systems*	20
Group C: General elective units	Weighting Points
UEECO0001	Estimate electrotechnology projects	40
UEEEL0007	Develop detailed electrical drawings*	60
UEEEL0027	Carry out low voltage electrical field testing and report findings*	60
UEEIC0012	Develop structured programs to control external devices*	40
UEEIC0014	Develop, enter and verify programs in supervisory control and data acquisition systems*	60
UEEIC0015	Develop, enter and verify word and analogue control programs for programmable logic controllers*	60
UEEIC0026	Provide solutions to fluid circuit operations*	60
UEEIC0027	Provide solutions to pneumatic-hydraulic system operations*	80
UEEIC0028	Provide solutions to problems in industrial control systems*	60
UEEIC0034	Set up industrial field control devices*	60
UEEIC0040	Solve problems in polyphase electronic power control circuits*	60
UEEIC0042	Solve problems in single phase electronic power control circuits*	60

Qualification Mapping Information

This qualification replaces and is equivalent to UEE40911 Certificate IV in Industrial Electronics and Control

Links

Companion Volume Implementation Guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b8a8f136-5421-4ce1-92e0-2b50341431b6