UEE31220 Certificate III in Instrumentation and Control

Release 1

UEE31220 Certificate III in Instrumentation and Control

Modification History

Release 1. This is the first release of this qualification in the UEE Electrotechnology Training Package

Qualification Description

This qualification covers competencies to select, install, set up, test, fault find, repair and maintain systems and devices for measurement and recording of physical/chemical phenomenon and related process control. No licensing, legislative or certification requirements apply to this qualification at the time of publication.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

A total of 1060 weighting points comprising: 920 core weighting points listed below; plus 140 general elective weighting points from the general elective units listed below. Choose a total of 140 weighting points elective units from the list below, of which between 0 and 60 weighting points can be taken from Group A; and between 80 and 140 weighting points must be taken from Group B; or all minimum 140 weighting points can be taken from Group B Up to 60 weighting points of the general elective units Group A, may be selected, with appropriate contextualisation, from any relevant nationally endorsed Training Package or accredited course, provided selected units contribute to the vocational outcome of the qualification. Previously assigned weighting points are listed in the UEE Electrotechnology Training Package Companion Volume Implementation Guide (CVIG), if not listed weighting points will be 10 points, unless directed from the Electrotechnology Industry Reference Committee (IRC). There are units of competency within this qualification that contain pre-requisites. Units of competency that have a pre-requisite requirement are identified by this symbol *. Refer directly to the units of competency to identify pre-requisite requirements to ensure all are complied with. A list of all pre-requisites is also provided in the UEE Pre-requisite Companion Volume. Where imported units are selected, care must be taken to ensure all pre-requisite units specified are complied with.
Core units	Weighting Points
UEECD0007	Apply work health and safety regulations, codes and practices in the workplace	20
UEECD0016	Document and apply measures to control WHS risks associated with electrotechnology work*	20
UEECD0019	Fabricate, assemble and dismantle utilities industry components*	40
UEECD0020	Fix and secure electrotechnology equipment*	20
UEECD0043	Solve problems in direct current circuits*	80
UEECD0045	Solve problems in multiple path extra-low voltage (ELV) a.c. circuits*	40
UEECD0051	Use drawings, diagrams, schedules, standards, codes and specifications*	40
UEECO0009	Participate in instrumentation and control work and competency development activities	60
UEEIC0013	Develop, enter and verify discrete control programs for programmable controllers*	60
UEEIC0021	Find and rectify faults in process final control elements*	40
UEEIC0022	Install instrumentation and control apparatus and associated equipment*	20
UEEIC0023	Install instrumentation and control cabling and tubing*	20
UEEIC0029	Set up and adjust PID control loops*	40
UEEIC0030	Set up and adjust advanced PID process control loops*	40
UEEIC0031	Set up and configure human-machine interface (HMI) and industrial networks*	60
UEEIC0038	Solve problems in density/level measurement components and systems*	40
UEEIC0039	Solve problems in flow measurement components and systems*	40
UEEIC0041	Solve problems in pressure measurement components and systems*	40
UEEIC0043	Solve problems in temperature measurement components and systems*	40
UEEIC0047	Use instrumentation drawings, specifications, standards and equipment manuals*	40
UEEIC0048	Verify compliance and functionality of instrumentation and control installations*	40
UEERE0001	Apply environmentally and sustainable procedures in the energy sector	20
UEERL0004	Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring*	60
Group A: Imported and common elective units	Weighting Points
BSBCUS201	Deliver a service to customers	20
CPCCWHS1001	Prepare to work safely in the construction industry	10
HLTAID001	Provide cardiopulmonary resuscitation	10
HLTAID003	Provide first aid	10
ICTICT203	Operate application software packages	20
UEECD0011	Comply with scheduled and preventative maintenance program processes	20
UEECD0035	Provide basic instruction in the use of electrotechnology apparatus	20
UEECO0002	Maintain documentation	20
UEECO0015	Provide quotations for installation or service jobs	20
UEECO0017	Source and purchase material/parts for installation or service jobs	20
Group B: General elective units	Weighting Points
UEECD0050	Use and maintain the integrity of a portable gas detection device*	20
UEECS0033	Use engineering applications software on personal computers	40
UEEEC0060	Repairs basic electronic apparatus faults by replacement of components*	40
UEEEC0069	Troubleshoot digital sub-systems*	80
UEEEC0075	Troubleshoot single phase input d.c power supplies*	40
UEEIC0004	Calibrate, adjust and test measuring instruments*	40
UEEIC0033	Set up gas analysis measuring and control instruments*	20
UEEIC0035	Set up scientific analysis measuring and control instruments*	20
UEEIC0036	Set up water analysis measuring and control instruments*	20
UEEIC0037	Set up weighting measuring and control instruments*	20
UEEIC0045	Troubleshoot medical equipment control systems*	120
UEEIC0046	Troubleshoot process control systems*	60
UEEHA0003	Determine the explosion-protection requirements to meet a specified classified hazardous area*	40
UEEHA0004	Enter a classified hazardous area to undertake work related to electrical equipment	40
UEEHA0005	Install explosion-protected equipment and associated apparatus and wiring systems*	60
UEEHA0006	Maintain equipment associated with hazardous areas*	60

Qualification Mapping Information

This qualification replaces and is equivalent to UEE31211 Certificate III in Instrumentation and Control

Links

Companion Volume implementation guides are found in VETNet - - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b8a8f136-5421-4ce1-92e0-2b50341431b6