TLIB2082A Repair steel structures

Release: 1

TLIB2082A Repair steel structures

Modification History

Not Applicable

Unit Descriptor

Unit Descriptor	This unit involves the skills and knowledge required to repair steel structures and their components in accordance with safeworking and regulatory requirements and workplace procedures. It includes determining job requirements, preparing and maintaining components, performing repairs, cleaning up the site after maintenance activities, and completing documentation. Licensing or certification requirements are not applicable to this unit.

Application of the Unit

Application of the Unit	Persons achieving competence in this unit will need to fulfil the applicable legislated rail safety requirements including acts and regulations from each state and territory together with any nationally approved compliance codes and/or guidelines. Work is performed under minimal supervision, generally within a team environment. It involves the application of routine operational principles and procedures to the repair of structures and their components as part of workplace activities across a variety of operational contexts within the Australian rail system.

Licensing/Regulatory Information

Refer to Unit Descriptor

Pre-Requisites

Not Applicable

Employability Skills Information

Employability Skills	This unit contains employability skills.

Elements and Performance Criteria Pre-Content

Elements describe the essential outcomes of a unit of competency.	Performance criteria describe the required performance needed to demonstrate achievement of the element. Assessment of performance is to be consistent with the evidence guide.

Elements and Performance Criteria

ELEMENT	PERFORMANCE CRITERIA
1 Determine job requirements	1.1 Structures are inspected as necessary to locate defects 1.2 Job requirements are determined in accordance with workplace procedures, including identification of scope of work and resources required
2 Prepare component for repair	2.1 Components requiring repair are prepared according to requirements 2.2 Materials required for job are identified and organised as required to enable appropriate repair of components 2.3 Surfaces of components are treated using appropriate methods and materials as required 2.4 Components are assembled using appropriate lifting methods to ensure safety 2.5 Connection locations are checked for clearances and tolerances to allow smooth fitting of components 2.6 Fastening of components is performed to specification as required
3 Perform repairs	3.1 Steel members are accurately marked, drilled and cut in accordance with workplace procedures 3.2 Component is replaced or repaired to required standard in accordance with workplace procedures 3.3 Replaced or repaired components are connected to the structure by approved methods in accordance with workplace procedures 3.4 Connections between steel members are tightened, repaired or replaced using approved material and techniques 3.5 External steel deficiencies in components are treated with suitable materials as required to minimise degradation of components
4 Clean up site	4.1 Site is cleaned up to ensure it is restored and environmentally sound and safe in accordance with workplace procedures and environmental regulations and standards
5 Complete documentation	5.1 Work as executed documentation is completed as required in accordance with workplace procedures

Required Skills and Knowledge

REQUIRED KNOWLEDGE AND SKILLS
This describes the essential knowledge and skills and their level required for this unit.
Required knowledge:
Relevant safety, OH&S and environmental procedures and regulations
Workplace procedures for the repair of steel structures
Problems that may occur during the repair of steel structures, and action that can be taken to report or resolve the problems
Hazards that may exist when repairing structures and/or components, and ways of controlling the risks involved
Functions of different types of steel structures
Steel structures repair methods and techniques
Information on the use of epoxy and grouts for mortar pads
Basic steel components assembly techniques
Relevant recording and documentation procedures

Required skills:
Communicate effectively with others when repairing steel structures
Read and interpret plans and specifications relevant to the repair of steel structures
Follow operational instructions and work sequences when undertaking steel structures repair
Complete documentation related to the repair of steel structures
Operate communication equipment to required protocol
Work collaboratively with others when repairing steel structures
Promptly report and/or rectify any identified problems, faults or malfunctions that may occur when repairing steel structures in accordance with regulatory requirements and workplace procedures
Implement contingency plans for unexpected events that may arise during the repair of steel structures
Apply precautions and required action to minimise, control or eliminate hazards that may exist during work activities
Modify activities depending on differing operational contingencies, risk situations and environments
Select and use relevant tools and equipment
Adapt to differences in tools and equipment and work requirements in accordance with standard operating procedures
Select and use required personal protective equipment
Identify defects

Evidence Guide

EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit	The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying: the underpinning knowledge and skills relevant legislation and workplace procedures other relevant aspects of the range statement Assessment must include exercises which demonstrate competent performance of the following in a range of situations: replacing steel components repairing existing steel structures using a range of repair techniques repairing a range of defect types
Context of and specific resources for assessment	Performance is demonstrated consistently over a period of time and in a suitable range of contexts Resources for assessment include: a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or access to an appropriate range of relevant operational situations in the workplace In both real and simulated environments, access is required to: relevant and appropriate materials and equipment, and applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment	Assessment of this unit must be undertaken by a registered training organisation As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests Practical assessment must occur: in an appropriate range of situations in the workplace

Range Statement

RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Operations may be conducted:	by day or night in all weather conditions
Work may be conducted in:	restricted spaces exposed conditions controlled or open environments
Work may involve:	exposure to chemicals, and dangerous or hazardous substances movements of equipment, goods and vehicles
Structures and components may include:	underbridges, overbridges, footbridges culverts tunnels retaining walls platforms overhead wiring structures signal gantries
Equipment may include:	welding, oxy and cutting equipment temporary supports manual tools small power tools air tools and compressor scaffolding ladders elevated work platform (EWP) boat/barge
Materials may include:	structural steel epoxy grouts cement grouts paint (protective treatment) bolts and fasteners carbon fibre
Structures maintenance methods may include:	replacing repairing bolting bonding welding painting (protective treatment)
Liaison may include:	internal/external personnel from other work areas (e.g. train controllers) road authorities local councils landowners
Communication equipment may include:	two-way radios telephones/mobile phones agreed audible or hand signals
Information may be provided:	electronically in writing, via forms/documents/plans orally, via face-to-face communications trackside signals
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:	company procedures enterprise procedures organisational procedures established procedures
Depending on work context, safety and personal protective equipment may include:	high visibility clothing hearing protection gloves sunscreen sunglasses safety glasses insect repellent safety headwear safety footwear portable radios/mobile phone safety harness and ropes torch safety devices respirator
Information/documents may include:	operational instructions, policies and workplace procedures local authority regulations and procedures work orders technical instructions manufacturers or workplace equipment instructions and operation manuals emergency procedure manuals two-way radio/mobile phone operation procedures QA plans, data and document control conditions of service, legislation and industrial agreements including workplace agreements and awards
Applicable procedures and codes may include:	legislated rail safety requirements including acts and regulations from each applicable state and territory together with any nationally approved compliance codes and/or guidelines relevant state/territory regulations, codes of practice and safeworking system requirements relevant Australian Standards and related requirements including AS 4292 relevant state/territory OH&S legislation relevant state/territory environmental protection legislation

Unit Sector(s)

Not Applicable

Competency Field

Competency Field	B - Equipment Checking and Maintenance