TLIB1031A Clean up plant, equipment and worksite

Release: 1

TLIB1031A Clean up plant, equipment and worksite

Modification History

Not Applicable

Unit Descriptor

Unit Descriptor	This unit involves the skills and knowledge required to clean up plant, equipment and worksite in accordance with safeworking and regulatory requirements and workplace procedures, including planning and preparing work, arranging the clear up and disposal/reclamation of material, operating cleaning equipment and mobile plant, finalising the work and restoring the site. Licensing, legislative, regulatory or certification requirements are applicable to this unit.

Application of the Unit

Application of the Unit	Persons achieving competence in this unit will need to fulfil the applicable legislated rail safety requirements including acts and regulations from each state and territory together with any nationally approved compliance codes and/or guidelines. Work is performed under minimal supervision, generally within a team environment. It involves the application of routine operational principles and procedures to the cleaning up of plant, equipment and worksites as part of workplace activities across a variety of operational contexts within the Australian rail system.

Licensing/Regulatory Information

Refer to Unit Descriptor

Pre-Requisites

Not Applicable

Employability Skills Information

Employability Skills	This unit contains employability skills.

Elements and Performance Criteria Pre-Content

Elements describe the essential outcomes of a unit of competency.	Performance criteria describe the required performance needed to demonstrate achievement of the element. Assessment of performance is to be consistent with the evidence guide.

Elements and Performance Criteria

ELEMENT	PERFORMANCE CRITERIA
1 Plan and prepare work	1.1 Details of cleaning requirements are identified by instructions, inspections, work orders and schedules 1.2 Materials and equipment are identified and obtained 1.3 Relevant legislative, statutory and workplace requirements and standards are identified, applied and monitored throughout the work procedure 1.4 Environmental regulatory requirements are identified to ensure site is left in an environmentally sound condition 1.5 Required materials to be removed and methods of removal are identified to facilitate clean up
2 Arrange clear up and disposal/ reclamation of material	2.1 Storage/disposal areas and quarantine zones are identified and arranged to ensure environmentally sound disposal 2.2 Reclaimed material is removed to storage areas using appropriate methods 2.3 Non-required materials/services are removed and disposed of in appropriate manner to ensure clean and environmentally stable site 2.4 Site is inspected for overlooked materials to minimise wastage and losses
3 Operate cleaning equipment and mobile plant	3.1 Cleaning and mobile plant is operated to site/manufacturers requirements. 3.2 Operator maintenance is performed to manufacturers/site standards 3.3 Cleaning equipment is cleaned and stored
4 Finalise work and restore site	4.1 Drainage is established/restored as necessary to ensure well drained site 4.2 Re-vegetation/environmental repair is arranged if required to return site to environmentally sound condition 4.3 Barriers are removed or checked for integrity to ensure access to correct areas 4.4 Access roads are closed if required to prevent unauthorised access to closed site 4.5 Site is left in suitable level and surface condition to ensure environmentally sound, safe and clean site

Required Skills and Knowledge

REQUIRED KNOWLEDGE AND SKILLS
This describes the essential knowledge and skills and their level required for this unit.
Required knowledge:
Applicable legislated rail safety requirements including acts and regulations from each state and territory together with any nationally approved compliance codes and/or guidelines
Relevant OH&S and environmental procedures and regulations
Workplace procedures for the cleaning up of plant, equipment and worksites
Problems that may occur during the cleaning up of plant, equipment and worksites and action that can be taken to report or resolve the problems
Hazards that may exist when cleaning up plant, equipment and worksites and ways of controlling the risks involved
Permit to work system where applicable
Applications and characteristics of plant and equipment
Cleaning agents/sealants and their properties and precautions for their use
Cleaning equipment and related materials and their applications
Plant and equipment cleaning procedures and instructions
Relevant recording and documentation requirements
Manufacturers instructions for the servicing and cleaning of equipment

Required skills:
Communicate effectively with others when cleaning up plant, equipment and worksites
Read and interpret instructions, procedures, information and signs relevant to the cleaning up of plant, equipment and worksites
Interpret and follow operational instructions and prioritise work
Complete documentation related to the cleaning up of plant, equipment and worksites
Operate electronic communication equipment to required protocol
Work collaboratively with others
Adapt appropriately to cultural differences in the workplace, including modes of behaviour and interactions with others
Promptly report and/or rectify any identified problems, faults or malfunctions in accordance with regulatory requirements and workplace procedures
Implement contingency plans for unexpected events that may arise when cleaning up plant, equipment and worksites
Apply precautions and required action to minimise, control or eliminate hazards that may exist during work activities
Monitor work activities in terms of planned schedule
Modify activities depending on differing operational contingencies, risk situations and environments
Work systematically with required attention to detail without injury to self or others, or damage to goods or equipment
Operate and adapt to differences in equipment and sites in accordance with standard operating procedures
Use hand and power tools
Apply cleaning agents, sealants and chemicals
Handle hazardous materials
Select and use required personal protective equipment conforming to industry and OH&S standards
Level and re-vegetate sites
Identify and reclaim salvageable materials
Identify and remove water/waste/surplus materials
Operate and maintain relevant mobile plant and mobile plant equipment Apply cleaning agents, sealants and chemicals
Use barriers correctly

Evidence Guide

EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit	The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying: the underpinning knowledge and skills relevant legislation and workplace procedures other relevant aspects of the range statement
Context of and specific resources for assessment	Performance is demonstrated consistently over a period of time and in a suitable range of contexts Resources for assessment include: a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or access to an appropriate range of relevant operational situations in the workplace In both real and simulated environments, access is required to: relevant and appropriate materials and equipment, and applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment	Assessment of this unit must be undertaken by a registered training organisation As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests Practical assessment must occur: through activities in an appropriately simulated environment at the registered training organisation, and/or in an appropriate range of situations in the workplace

Range Statement

RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Operations may be conducted:	by day or night in all relevant weather conditions
Materials may include:	all purpose garden sprays floor stripper floor polish floor cleaner disinfectant degreaser bleach petrochemicals
Tools may include:	gardening implements cleaning tools hand tools
Cleaning equipment may include:	hoses lances pneumatic tube hones high speed polishers vacuum cleaners steam cleaners brooms buckets mops shovels duster internal combustion driven vacuum cleaner
Cleaning operations may also include:	water lancing internal boiler washing
Communication methods may include:	written verbal radio
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:	company procedures enterprise procedures organisational procedures established procedures
Safety and protective equipment may include:	high visibility clothing hearing protection and gloves sunscreen sunglasses and safety glasses insect repellent safety headwear safety footwear portable radios hand lamps flags safety devices
Disposal of material may involve:	the use of a quarantine zone in accordance with environmental regulations and requirements
Information/documents may include:	applicable legislated rail safety requirements including acts and regulations from each state and territory together with any nationally approved compliance codes and/or guidelines operational instructions, policies and workplace procedures relevant logs or record books notices, records and requests technical instructions manufacturers or workplace equipment operation manuals emergency procedure manuals two-way radio operation procedures QA plans, data and document control environmental regulations and associated requirements conditions of service, legislation and industrial agreements including workplace agreements and awards
Applicable regulations and legislation may include:	applicable legislated rail safety requirements including acts and regulations from each state and territory together with any nationally approved compliance codes and/or guidelines relevant Australian Standards and related requirements relevant state/territory OH&S legislation relevant state/territory environmental protection legislation

Unit Sector(s)

Not Applicable

Competency Field

Competency Field	B - Equipment Checking and Maintenance