RIIWSV303D Operate fluid systems

Release: 3

RIIWSV303D Operate fluid systems

Modification History

Release	Comment
1	This is a new unit
2	Corrected incorrect Elements and Performance Criteria that were loaded to TGA in release 1.
3	Required frequency and volume of evidence amended in Performance evidence. Substantial amendments made in Assessment Conditions field, including: references to Industry Sectors, assessor and subject matter expert experience requirements, how assessment should be conducted and what it should confirm.

Application

This unit describes a participant’s skills and knowledge required to operate fluid systems in Drilling.

This unit is appropriate for those working in operational roles, to the level of a Derrickman.

Licensing, legislative, regulatory and certification requirements that may apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit.

Unit Sector

Drilling (Well Servicing)

Elements and Performance Criteria

1. Plan and prepare for fluid operations	1.1 Access, interpret and apply compliance documentation and ensure the work activity is complaint 1.2 Obtain, read, clarify/confirm and apply work instructions 1.3 Identify and report all potential hazards 1.4 Select and use/wear personal protective equipment and protective clothing 1.5 Coordinate job requirements with others at the site 1.6 Confirm permits required and prepare written permits to work
2. Maintain and repair fluid pumps	2.1 Check pony rod clamp is fitted correctly 2.2 Lubricate gear end of pump and check oil levels in gear end of pump 2.3 Identify faults and report immediately 2.4 Identify, record and/or report requirement for repair or maintenance of mud pumps 2.5 Maintain and replace defective swabs, liner, valves, seats, gauges and wear plates of the fluid end of pump
3. Operate and monitor fluid pumps	3.1 Carry out pre start checks 3.2 Set or adjust all critical equipment such as pop-off valve and or choke manifold/s to safe operating parameters 3.3 Test operational function of all valves and/or choke manifold/s in the fluid system 3.4 Pressure test system, record in writing and communicate issues identified 3.5 Confirm and identify flow path required for operation and pumping parameters 3.6 Visually inspect and listen to mud pumps for abnormalities
4. Operate, maintain and repair fluid pumps	4.1 Check safety lines/restraints are in place, secure and functional 4.2 Engage and/or adjust appropriate equipment as directed by supervisor 4.3 Clean all equipment and visually inspect for leaks and proper operation, in accordance with specifications 4.4 Identify faults and report immediately 4.5 Identify, record in writing and report requirement for repair or maintenance of fluid conditioning equipment 4.6 Replace screens on shakers or cones on desilters/desanders 4.7 Replace bags/pods in filtration unit/s 4.8 Perform periodic or scheduled preventative maintenance on all fluid treatment units
5. Operate and service transfer valves in fluid pits/tanks or fluid pumps	5.1 Correctly align valves 5.2 Lubricate valve stems 5.3 Clean and inspect transfer valves 5.4 Replace or repair defective parts
6. Identify and act upon variations in circulating medium during operation	6.1 Monitor, adjust and report pit/tank level 6.2 Monitor and report fluid properties 6.3 Monitor and report size of cuttings 6.4 Monitor and report volume of fluid returns 6.5 Prepare for emergency situations

Foundation Skills

Foundation skills essential to performance are explicit in the performance criteria of this unit. Further information is available in the Resources and Infrastructure Industry Training Package Companion Volume.

Unit Mapping Information

No equivalent unit

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=88a61002-9a21-4386-aaf8-69c76e675272