Assessment Requirements for PMC553080 Set up and optimise finishing process

Release: 1

Assessment Requirements for PMC553080 Set up and optimise finishing process

Modification History

Release 1. Supersedes and is equivalent to PMC553080B Set up and optimise finishing process

Performance Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria and demonstrate the ability to:

read and interpret procedures, job specifications, production schedules, test results, instruments/control panels, material labels and safety data sheets (SDS)

install and set up equipment to process specifications

perform pre-start checks, start-up/shutdown procedures

monitor key variables, including:

operating parameters

yield

energy utilisation

variations

fluctuations

trends

product integrity and general conformance to specification

use tests, process data and own senses to monitor plant and maximise performance

make adjustments to equipment settings, process conditions and/or raw materials to bring production into specification

identify hazards and apply relevant hazard controls

apply safety procedures

recognise early warning signs of equipment/processes needing attention or with potential problems

distinguish between causes of problems, including:

instrument failure/malfunction

electrical/mechanical failure/malfunction

wrong readings

material variations/contamination

process abnormalities

procedural errors

atmospheric conditions

recognise and prioritise problems requiring action

resolve routine and non-routine problems

communicate effectively with team/work group and supervisors

complete workplace records

calculate and interpret process conditions, performance and trends.

Knowledge Evidence

Must provide evidence that demonstrates knowledge relevant to their job sufficient to operate independently and to solve routine and non-routine problems, including knowledge of:

composition and nature of the product

functions, limitations and principles of operation of finishing and ancillary equipment being used

impact of variations in equipment settings, process conditions and raw materials on product quality, production output and optimisation of process

factors which may affect product quality or production output and appropriate remedies

physics and chemistry relevant to the equipment/process/materials

characteristics of materials being processed and their behaviour in relation to process conditions and stages of production

quality requirements at each stage of production

common adjustments in process variables and their impact on product quality and production output

start-up and shutdown processes

routine and non-routine problems that may arise, the range of possible causes and appropriate actions

organisation procedures relevant to the work environment/job role

hierarchy of control

hazards that may arise in the job/work environment and:

their possible causes

potential consequences

appropriate risk controls.

Assessment Conditions

The unit should be assessed holistically and the judgement of competence shall be based on a holistic assessment of the evidence.

The collection of performance evidence:

should occur over a range of situations which include typical disruptions to normal, smooth operation of an operating plant

will typically include a supervisor/third-party report or other evidence, focusing on consistent performance and problem recognition and solving. A supervisor/third-party report must be prepared by someone who has a direct, relevant, current relationship with the person being assessed and who is in a position to form a judgement on workplace performance relevant to the unit of competency

must include the use of an appropriate industrial item/s of equipment requiring demonstration of operation, start-up and shutdown procedures and responding to problems

may use industry based simulation for all or part of the unit particularly where safety, lack of opportunity or significant cost is an issue.

Assessment should occur in operational workplace situations. Where this is not possible or where personal safety or environmental damage are limiting factors assessment must occur in a sufficiently rigorous simulated environment that reflects realistic operational workplace conditions. This must cover all aspects of workplace performance, including environment, task skills, task management skills, contingency management skills and job role environment skills.

Assessment in a simulated environment should use evidence collected from demonstration of skills and one or more of:

walk-throughs

pilot plant operation

industry-based case studies/scenarios

‘what ifs’.

Knowledge evidence may be collected concurrently with performance evidence (provided a record is kept) or through an independent process such as workbooks, written assessments or interviews (provided a record is kept).

Assessment processes and techniques must be appropriate to the language, literacy and numeracy requirements of the work being performed and the needs of the candidate.

Conditions for assessment must include access to all tools, equipment, materials and documentation required, including relevant workplace procedures, product and manufacturing specifications associated with this unit.

The regulatory framework will be reflected in workplace policies and procedures and is not required to be independently assessed.

Foundation skills are integral to competent performance of the unit and should not be assessed separately.

Assessors must satisfy the assessor competency requirements that are in place at the time of the assessment as set by the VET regulator.

In addition the assessor or anyone acting in subject matter expert role in assessment shall demonstrate both technical competency and currency. If the assessor cannot demonstrate technical competency and currency they shall assess with a subject matter expert who does meet these requirements.

Technical competence can be demonstrated through one or more of:

relevant VET or other qualification/Statement of Attainment

appropriate workplace experience undertaking the type of work being assessed under routine and non-routine conditions

appropriate workplace experience supervising/evaluating the type of work being assessed under routine and non-routine conditions

Currency can be demonstrated through one or more of:

being currently employed undertaking the type of work being assessed

being employed by the organisation undertaking the type of work being assessed and having maintained currency in accordance with that organisation’s policies and procedures

having consulted/had contact with an organisation undertaking the type of work being assessed within the last twelve months, the consultation/contact being related to assessment

conducting on the job training/assessments of the type of work being assessed

being an active member of a relevant professional body and participating in activities relevant to the assessment of this type of work.

Links

MSA Training Package Implementation Guides - http://mskills.org.au/training-packages/info/