Assessment Requirements for MSMRV376 Install recreational vehicle windows and doors

Release: 1

Assessment Requirements for MSMRV376 Install recreational vehicle windows and doors

Modification History

Release 1. Supersedes and is equivalent to MSMRV320 Fit windows and doors to a recreational vehicle. Changes to application, elements, performance criteria and assessment requirements. Range of conditions removed.

Performance Evidence

There must be evidence that the candidate has completed the tasks set out in the elements and performance criteria and has demonstrated the ability to install both the windows and the doors of a recreational vehicle on at least three occasions.

Knowledge Evidence

There must be evidence the candidate knows:

requirements relevant to the performance criteria of:

AS/NZS 5601.2 Gas installations LP Gas installations in caravans and boats for non-propulsive purposes

AS/NZS 3001 Electrical installations - Transportable structures and vehicles including their site supplies

the Road Vehicle Standards Act 2018

Australian design rules

types of recreational vehicle windows and doors, mouldings and adhesives and manufacturer’s installation and use instructions for them

which hand and power tools and equipment to use when installing recreational vehicle windows and doors

workplace policies and procedures relevant to their job role and responsibilities including for:

installing recreational vehicle windows and doors

communication and reporting

environmental protection and sustainability, including adhesives, dust, noise and waste

quality assurance

work health and safety, including personal protective equipment

work planning

hazards that might arise in the work environment and their controls

the most common issues that can arise when installing recreational vehicle windows and doors and how to avoid and respond to them

how to identify if recreational vehicle windows and doors are installed correctly.

Assessment Conditions

Skills must have been demonstrated in the workplace or a simulated environment that reflects workplace conditions and contingencies. The following conditions must be met for this unit:

use of suitable facilities, equipment and resources required to install recreational vehicle windows and doors including:

recreational vehicles manufactured to the point of having windows and doors installed

materials and items required for the tasks

hand and power tools and lifting, safety and other equipment

job instructions and workplace procedures.

Assessors of this unit must satisfy the NVR/AQTF mandatory competency requirements for assessors.

Links

Companion volume implementation guides are found in VETNet – - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=d1287d36-dff4-4e9f-ad2c-9d6270054027