MSM30116 Certificate III in Process Manufacturing

Release 3

MSM30116 Certificate III in Process Manufacturing

Modification History

Release 3. Addition of 6 units to Group B electives

Release 2. Minor adjustment to Packaging Rules statement in Group B units. Imported units updated to current versions. Equivalent.

Release 1. Units updated. Supersedes and is equivalent to MSA30107 Certificate III in Process Manufacturing.

Qualification Description

The MSM30116 Certificate III in Process Manufacturing provides the competencies required by advanced production workers who use a range of equipment and provide support functions directly related to producing products. They would undertake more advanced roles than workers with a Certificate II in Process Manufacturing, working in accordance with operating procedures and applying knowledge to anticipate problems and solve a range of foreseen and unforeseen problems.

This qualification is designed for use across the three process manufacturing sectors:

chemical, hydrocarbons and oil refining

plastics, rubber and cablemaking

manufactured mineral products.

It includes the same range of electives, but with different packaging rules to provide a qualification for workers unable to meet the technical requirements of PMA, PMB or PMC.

This qualification covers:

production support workers - people working in manufacturing and filling the vital production support roles but who may not have the opportunity to develop competency in sufficient technical units related directly to producing products

employees who operate across more than one category within process manufacturing or 'specialised processes' and elsewhere when required.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

To be awarded the MSM30116 Certificate III in Process Manufacturing, competency must be achieved in twenty-one (21) units of competency: four (4) core units of competency seventeen (17) elective units of competency, as specified below: a minimum of five (5) units from Group A a maximum of twelve (12) units from Group B. Note: Where pre-requisite units are identified they must be counted in the total number of units required for achievement of the qualification.
Core units
Unit code	Unit title
MSMENV272	Participate in environmentally sustainable work practices
MSMWHS200	Work safely
MSMSUP210	Process and record information
MSS402051	Apply quality standards
ELECTIVE UNITS Group A Elective units
Unit code	Unit title	Prerequisites
MEM03001B	Perform manual production assembly
MEM03006B	Set assembly stations
MEM09002B	Interpret technical drawing
MEM09204A	Produce basic engineering detail drawings	MEM09002B
MEM11005B	Pick and process order
MEM11006B	Perform production packaging
MEM11007B	Administer inventory procedures
MEM12023A	Perform engineering measurements
MEM15001B	Perform basic statistical quality control
MEM15003B	Use improvement processes in team activities	MEM16007A
MEM15004B	Perform inspection
MSL973001	Perform basic tests
MSMOPS301	Treat corrosion
MSMOPS363	Organise on site work
MSMPER300	Issue work permits	MSMWHS201
MSMSUP300	Identify and apply process improvements
MSMSUP301	Apply HACCP to the workplace
MSMSUP303	Identify equipment faults
MSMSUP309	Maintain and organise workplace records
MSMSUP310	Contribute to the development of plant documentation
MSMSUP330	Develop and adjust a production schedule
MSMSUP382	Provide coaching/mentoring in the workplace
MSMSUP383	Facilitate a team
MSMSUP390	Use structured problem solving tools
MSMWHS300	Facilitate the implementation of WHS for a work group
TAEDEL301	Provide work skill instruction
Group A units may also be selected from the Group A and Group B units in the PMA and PMB Certificates III, and Group A and Group B1 units in the PMC Certificate III.
Group B Elective units
Unit code	Unit title	Prerequisites
FWPCOT2238	Cut materials with a hand-held chainsaw
HLTAID003	Provide first aid
MSTGN2008	Coordinate work of team/section
MEM13003B	Work safely with industrial chemicals and materials
MEM16006A	Organise and communicate information
MEM16007A	Work with others in a manufacturing, engineering or related environment
MEM16008A	Interact with computing technology
MEM18001C	Use hand tools
MEM18002B	Use power tools/hand held operations
MSMENV172	Identify and minimise environmental hazards
MSMOPS100	Use equipment
MSMOPS101	Make measurements
MSMOPS102	Perform tasks to support production
MSMOPS200	Operate equipment
MSMOPS201	Cut polymer materials
MSMOPS202	Fabricate polymer materials
MSMOPS212	Use enterprise computers or data systems
MSMOPS244	Layout and cut materials
MSMPER200	Work in accordance with an issued permit
MSMPER201	Monitor and control work permits
MSMPER202	Observe permit work
MSMPER205	Enter confined space	MSMPER200
MSMPMC308	Operate slip casting equipment
MSMPMC309	Finish products after firing
MSMPMC310	Hand mould products
MSMPMC311	Operate a firing kiln
MSMPMC312	Operate glass finishing equipment
MSMPMC403	Set up and optimise glass forming process
MSMSUP100	Apply workplace context to own job
MSMSUP101	Clean workplace or equipment
MSMSUP106	Work in a team
MSMSUP200	Achieve work outcomes
MSMSUP204	Pack products or materials
MSMSUP205	Transfer loads
MSMSUP230	Monitor process operations
MSMSUP240	Undertake minor maintenance
MSMSUP273	Handle goods
MSMSUP280	Manage conflict at work
MSMSUP291	Participate in continuous improvement
MSMSUP292	Sample and test materials and product
MSMWHS100	Follow WHS procedures
MSMWHS110	Follow emergency response procedures
MSMWHS201	Conduct hazard analysis
MSMWHS205	Control minor incidents
MSMWHS210	Undertake first response to non-fire incidents
MSMWHS212	Undertake first response to fire incidents
MSMWHS216	Operate breathing apparatus
MSMWHS217	Gas test atmospheres
MSMWHS218	Control the risks of falls
MSS402002	Sustain process improvements
MSS402020	Apply quick changeover procedures
MSS402021	Apply Just in Time procedures
MSS402030	Apply cost factors to work practices
MSS402040	Apply 5S procedures
MSS402050	Monitor process capability
MSS402051	Apply quality standards
MSS402060	Use planning software systems in operations
MSS402080	Undertake root cause analysis
PMBHAN103	Shift materials safely by hand
TLID2010	Operate a forklift
Group B units may also be chosen from: Group C units in the PMA and PMB Certificates III and Group B2 units in the PMC Certificate III. A maximum of six (6) relevant units from this Training Package, other endorsed Training Packages and accredited courses – a maximum of 4 units packaged in a Certificate II or III and a maximum of 2 units packaged in a Certificate IV.

Qualification Mapping Information

Release 3. Addition of 6 units to Group B electives

Release 2. Minor adjustment to Packaging Rules statement in Group B units. Imported units updated to current versions. Equivalent.

Release 1. Supersedes and is equivalent to MSA30107 Certificate III in Process Manufacturing.

Links

Companion Volume Implementation Guides are available at VETNet - https://vetnet.education.gov.au/Pages/TrainingDocs.aspx?q=d1287d36-dff4-4e9f-ad2c-9d6270054027