MSM21115 Certificate II in Recreational Vehicle Manufacturing

Release 5

MSM21115 Certificate II in Recreational Vehicle Manufacturing

Modification History

Release 5. Two low use units removed from elective bank as determined at December 2020 AISC meeting in response to Skills Ministers’ objectives. Equivalent.

Release 4. Imported units updated to current versions. Equivalent.

Release 3. Imported units updated to current versions. Equivalent.

Release 2. Imported units updated to current version. Equivalent.

Release 1. Supersedes and is equivalent to MSA20610 Certificate II in Recreational Vehicle Manufacture.

Qualification Description

The MSM21115 Certificate II in Recreational Vehicle Manufacturing has been developed as an entry-level qualification. People with this qualification would be expected to work under supervision manufacturing recreational vehicles, including:

motor homes

caravans

camper trailers

slide-ons

fifth wheelers

to meet Australian requirements, such as road worthiness and the Australian Design Rule (ADR).

They may work in a large manufacturing organisation or a small workshop.

There are no specific licences that relate to this qualification. However, some units in this qualification may have licensing or regulatory requirements depending on the work context. Local regulations should be checked for details.

Entry Requirements

There are no entry requirements for this qualification.

Packaging Rules

To be awarded the MSM21115 Certificate II in Recreational Vehicle Manufacturing, competency must be achieved in fourteen (14) units of competency: three (3) core units of competency eleven (11) elective units of competency, as specified below: a minimum of seven (7) units of competency must be selected from Group A the balance of units, to a maximum of four (4) may be selected from: units not previously selected from Group A Group B units listed below. Note: Up to four (4) elective units of competency may be selected from this Training Package, other endorsed Training Packages and accredited courses, as specified in Groups A and B. Note: Where prerequisite units are identified they must be counted in the total number of units required for achievement of the qualification.
Core units Complete all three (3) units from the following list.
Unit code	Unit title
MSMENV272	Participate in environmentally sustainable work practices
MSMSUP102	Communicate in the workplace
MSMWHS200	Work safely
ELECTIVE UNITS Group A Electives Select a minimum of seven (7) units from the following list.
Unit code	Unit title	Prerequisites
AUMGTT001	Apply trim to vehicle components
AURVTT015	Fabricate and install canvas products for automotive and marine components
AURVTT019	Fabricate and install automotive and marine frames, canopies and side curtains
CPCPCM2043A	Carry out WHS requirements
CPCPGS3046A	Install LPG systems in caravans, mobile homes and mobile workplaces	CPCPCM2043A
MEM03001B	Perform manual production assembly
MEM05005B	Carry out mechanical cutting	MEM12023A MEM18001C
MEM07024B	Operate and monitor machine/process
MEM07028B	Operate computer controlled machines/ processes	MEM07024B
MEM09002B	Interpret technical drawing
MEM10002B	Terminate and connect electrical wiring	MEM09002B MEM12002B MEM18001C
MEM12002B	Perform electrical/electronic measurement
MEM12023A	Perform engineering measurements
MSMOPS101	Make measurements
MSMRV310	Fit recreational vehicle floor
MSMRV311	Fit furniture in a recreational vehicle
MSMRV312	Fit water systems in a recreational vehicle
MSMRV313	Fit 12 V cable systems in a recreational vehicle
MSMRV314	Construct and fit roof to a recreational vehicle
MSMRV315	Construct and fit slide out in a recreational vehicle
MSMRV318	Fit cladding to a recreational vehicle
MSMRV319	Fit front and rear moulds to a recreational vehicle
MSMRV320	Fit windows and doors to a recreational vehicle
MSMRV321	Fit required external items to a recreational vehicle
MSMRV322	Fit required external electrical components to a recreational vehicle
MSMRV323	Fit required internal items to a recreational vehicle
MSMRV324	Conduct final quality inspection for a recreational vehicle
MSMRV325	Fabricate a chassis and suspension for a recreational vehicle
MSMRV365	Remove and refit body moulding
MSMRV366	Fit transfers and decals to a recreational vehicle
Up to two (2) relevant Group A elective units of competency may be selected from this Training Package, other endorsed Training Packages and accredited courses, where they are available for inclusion at Certificate III qualification.
Group B Elective units Select a maximum of four (4) units from the following list.
Unit code	Unit title	Prerequisites
MEM11010B	Operate mobile load shifting equipment
MEM14004A	Plan to undertake a routine task
MEM15024A	Apply quality procedures
MEM18001C	Use hand tools
MEM18002B	Use power tools/hand held operations
MSMOPS102	Perform tasks to support production
MSMOPS200	Operate equipment
MSMOPS212	Use organisation computers or data systems
MSMPER200	Work in accordance with an issued permit
MSMRVT201	Apply technical knowledge of recreational vehicle manufacturing to work activities
MSMSUP100	Apply workplace context to own job
MSMSUP101	Clean workplace or equipment
MSMSUP106	Work in a team
MSMSUP240	Undertake minor maintenance
MSMSUP273	Handle goods
MSMSUP280	Manage conflict at work
MSMSUP291	Participate in continuous improvement
MSMWHS110	Follow emergency response procedures
MSMWHS205	Control minor incidents
MSS402021	Apply Just in Time (JIT) procedures
MSS402040	Apply 5S procedures
MSS402080	Undertake root cause analysis
PMBHAN103	Shift materials safely by hand
TLID2010	Operate a forklift
Up to two (2) relevant Group B elective units of competency may be selected from this Training Package, other endorsed Training Packages and accredited courses, where they are available for inclusion at Certificate II or III qualification

Qualification Mapping Information

Release 5. Two low use units removed from elective bank as determined at December 2020 AISC meeting in response to Skills Ministers’ objectives. Equivalent.

Release 4. Imported units updated to current versions. Equivalent.

Release 3. Imported units updated to current versions. Equivalent.

Release 2. Imported units updated to current version. Equivalent.

Release 1. Supersedes and is equivalent to MSA20610 Certificate II in Recreational Vehicle Manufacture.

Links

Companion Volume Implementation Guides are available at VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=d1287d36-dff4-4e9f-ad2c-9d6270054027