MSFPF1001 Frame a simple artwork

Release: 1

MSFPF1001 Frame a simple artwork

Modification History

Release 1 - New unit of competency

Application

This unit of competency covers designing, fabricating components and assembling a simple artwork package. It applies to a VET in Schools or pre-vocational program for new entrants to the furnishing industry. Tools and equipment should be used under supervision.

No licensing, legislative or certification requirements apply to this unit at the time of publication.

Pre-requisite Unit

Competency Field

Unit Sector

Picture Framing

Elements and Performance Criteria

Elements describe the essential outcomes.	Performance criteria describe the performance needed to demonstrate achievement of the element.
1	Design artwork package	1.1	Artwork to be framed is identified and its qualities and framing requirements assessed
1.2	A provisional design package is developed
1.3	Design is modified as required and approved in accordance with workplace procedures
1.4	Work sequence is planned to suit the job
2	Cut and join mouldings	2.1	Work health safety (WHS) requirements, including personal protection needs, are observed throughout the work
2.2	Tools, equipment and materials required for cutting and joining of mouldings are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety
2.3	Material is set out for cutting to length according to work instructions and workplace procedures
2.4	Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications
2.5	Mouldings are cut to length and checked for quality and fit in accordance with workplace practices
2.6	Components are laid out and fixed in preparation for joining according to work instructions and workplace procedures
2.7	Components are joined and checked for quality, alignment and finish according to workplace practices
3	Cut mat board	3.1	Tools, equipment and materials required for cutting mat board are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety
3.2	Mat board material is set out for cutting according to work instructions and workplace procedures
3.3	Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications
3.4	Mat boards are cut and checked for quality in accordance with workplace practices
4	Cut glass for framing	4.1	Tools, equipment and materials required for cutting glass are selected and checked prior to use to ensure that they are appropriate for the work in terms of quality, serviceability and safety
4.2	Glass is set out for cutting according to work instructions and workplace procedures
4.3	Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications
4.3	Glass is cut and checked for quality in accordance with workplace practices
5	Mount artwork	5.1	Method of mounting is determined
5.2	Mounting equipment is set up according to operating procedures and workplace practice
5.3	Artwork is positioned on substrate according to job requirements and placed in mounting equipment
5.4	Mounting equipment is operated in accordance with manufacturer instructions and workplace procedures
5.5	Assembled artwork is removed from equipment, inspected for quality in accordance with workplace procedures
6	Assemble artwork package	6.1	Fabricated components are cleaned and laid out for assembly in accordance with workplace procedures
6.2	Artwork is attached to backing material using the selected method
6.3	Frame components are assembled and adjusted, as required, to fit and fixed in place
6.4	Frame is fitted over package and the backing is fixed in accordance with workplace procedures
6.5	Fittings, attachments and hanging aids are attached in accordance with workplace procedures
6.6	Package is inspected for quality and processed in accordance with workplace procedures
7	Complete work	7.1	Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures
7.2	Off-cuts and unused materials are collected and stored for re-use or disposed following workplace procedures
7.3	Waste and scrap materials are dealt with following workplace procedures

Foundation Skills

Foundation skills essential to performance are explicit in the performance criteria of this unit of competency. Detail on appropriate performance levels for each furnishing unit of competency in reading, writing, oral communication and numeracy utilising the Australian Core Skills Framework (ACSF) are provided in the Furnishing Training Package Implementation Guide.

Range of Conditions

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.
Unit context includes:	WHS requirements, including legislation, building codes, material safety management systems, hazardous and dangerous goods codes, and local safe operating procedures or equivalent work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements work involves reading and interpreting plans, developing set-outs, using hand and power tools, operating basic machinery, applying quality requirements, applying product finishing techniques and materials, and is conducted under supervision and guidance
Simple artwork includes:	flat paper-based artwork not requiring any conservation measures
Tools and equipment include:	guillotines static mounted circular saws drop saws docking saws mitre saws underpinners (V-nailers) screwdrivers hand-operated tools: cutting blades clamps marking out tools mat cutters appropriate mounting tools and equipment flat felt-covered cutting table glass cutters squares tape measures marking pens/pencils
Materials include:	timber touch-up materials glues sandpaper standard mat board material appropriate mounting materials glass
Personal protective equipment includes:	that prescribed under legislation, regulations and enterprise policies: gloves safety glasses gauntlets footwear earmuffs aprons and overalls
Information and procedures include:	workplace procedures relating to the use of tools and equipment work instructions, including job sheets, cutting lists, plans, drawings and designs workplace procedures relating to reporting and communication manufacturer specifications and operational procedures

Unit Mapping Information

Supersedes and is equivalent to LMFPF1001B Frame a simple artwork.

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=0601ab95-583a-4e93-b2d4-cfb27b03ed73