Assessment Requirements for MEA383 Repair and/or overhaul gas turbine engine air inlet and compressor components and/or modules

Release: 2

Assessment Requirements for MEA383 Repair and/or overhaul gas turbine engine air inlet and compressor components and/or modules

Modification History

Release 2. Equivalent to MEA383 Repair and/or overhaul gas turbine engine air inlet and compressor components and/or modules with amended prerequisite codes.

Performance Evidence

Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria under the specified conditions of assessment, and must include:

applying relevant WHS procedures including the use of MSDS and PPE

using relevant maintenance documentation, specifications and aircraft/component manuals to:

recognise state of serviceability and overhaul or repair requirements for air inlet and compressor components

test and accurately and efficiently troubleshoot unserviceabilities and document the causes in air inlet and compressor components

dismantle and inspect air inlet and compressor component parts for serviceability and identify repair requirements as applicable

repair/replace/modify air inlet and compressor component parts

assemble and adjust air inlet and compressor components

correctly tagging, sealing and packaging completed components.

The underlying skills inherent in this unit should be transferable across a range of repair and/or overhaul applications associated with gas turbine engine components and/or modules. It is essential that the maintenance procedures (including the use of correct fuels and lubricants) are interpreted and applied to ensure quality and safety standards are achieved.

This shall be demonstrated through application across a number of different gas turbine engine components and/or modules. Ability to assess component/module serviceability and interpret parts requirements will be necessary to supplement the required evidence. Capability to interpret inspection procedures and specifications (allowable limits) and apply them in practice is critical.

Knowledge Evidence

Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

how to obtain relevant MSDS

the use of applicable items of PPE

WHS procedures

fault diagnosis techniques

system and component operation

repair and overhaul procedures and processes, including inspection, rework, repair and reclamation, assembly, balancing of rotating assemblies and final adjustment.

Assessment Conditions

Competency should be assessed in the work environment, or simulated work environment, using tools and equipment specified in maintenance documentation. It is also expected that applicable general-purpose tools and test equipment found in most routine situations would be used where appropriate.

The application of testing procedures should clearly indicate knowledge of system operation. Knowledge of system operation and the relationship of individual components will be necessary to supplement evidence of ability to troubleshoot component faults before undertaking any action. The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards.

The following conditions of assessment represent the requirements of the Regulators (ADF and CASA) and maintenance stakeholders and must be rigorously observed.

A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements and performance criteria of the unit of competency are being achieved under routine supervision on at least one (1) item from each of the following groups:

air inlet structure and blow-in doors where these items are part of an engine change unit or engine module

fans, where applicable (may be omitted if not applicable to the enterprise)

inlet guide vanes

centrifugal or axial flow compressor assemblies (low and high pressure)

compressor bleed valves, where applicable (may be omitted if not applicable to the enterprise).

This must include demonstration of the following repair processes:

finishing or re-finishing of metal surfaces through processes, such as polishing and lapping

removal of corrosion within maintenance manual limits

replacement of seals and backing rings

replacement of bearings

application of surface treatments, such as alodining

restoration of paint finishes.

This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry Evidence Guide (for details refer to the Companion Volume Assessment Guidelines).

Assessors must satisfy the requirements of the National Vocational Education and Training Regulator (Australian Skills Quality Authority, or its successors).

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.education.gov.au/Pages/TrainingDocs.aspx?q=ce216c9c-04d5-4b3b-9bcf-4e81d0950371