Assessment Requirements for MEA206 Remove and install aircraft basic radio communication and navigation system components

Release: 2

Assessment Requirements for MEA206 Remove and install aircraft basic radio communication and navigation system components

Modification History

Release 2. Equivalent to MEA206 Remove and install aircraft basic radio communication and navigation system components with amended prerequisite codes.

Performance Evidence

Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria under the specified conditions of assessment, and must include:

locating and identifying radio communication and navigation system components comprising:

HF and VHF communications

VOR and ADF navigation systems

ELT systems

locating and identifying applicable radio system antennas

removing and installing communication and navigation system components including antennas

applying relevant WHS practices.

It is essential that cleanliness requirements and safety precautions applicable to the system being maintained are fully observed, understood and complied with, as well as work practices associated with electrostatic sensitive devices.

Evidence of transferability of skills and knowledge related to removal and installation is essential. This is to be demonstrated by application across a range of radio communication and navigation system components as listed in the Assessment Conditions.

Knowledge Evidence

Evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

component attachment methods

connection of hardware and plugs

handling precautions for electrostatic sensitive devices

relevant WHS practices

the use of approved maintenance documentation and aircraft publications relating to radio communication and navigation systems and components

basic layout and working principles to block diagram level of:

HF communication systems

VHF communication systems

ADF navigation systems

VOR navigation systems

ELT systems

relevant regulatory requirements and standard procedures.

Assessment Conditions

Competency should be assessed in the work environment or simulated work environment, using tools and equipment specified in maintenance manuals. It is also expected that general-purpose tools, test and ground support equipment found in most routine maintenance situations would be used where appropriate.

An understanding of the attachment methods, connection of hardware, and the need for adjustment or calibration and system operation as they relate to the work must be demonstrated before undertaking any action. The work plan should take account of applicable safety and quality requirements in accordance with the industry and regulatory standards.

The following conditions of assessment represent the requirements of the Regulators (ADF and CASA) and maintenance stakeholders and must be rigorously observed.

A person cannot be assessed as competent until it can be demonstrated to the satisfaction of the workplace assessor that the relevant elements and performance criteria of the unit of competency are being achieved under routine supervision on at least one (1) item from each of:

HF and VHF communication and applicable antennas

ADF and VOR navigation and applicable antennas

ELT.

This shall be established via the records in the Log of Industrial Experience and Achievement or, where appropriate, an equivalent Industry Evidence Guide (for details refer to the Companion Volume Assessment Guidelines).

Assessors must satisfy the requirements of the National Vocational Education and Training Regulator (Australian Skills Quality Authority, or its successors).must satisfy National Vocational Education and Training Regulator (NVR)/Australian Quality Training Framework (AQTF) assessor requirements.

Where the unit is to be used for CASA licensing purposes the Assessor must also meet the criteria specified in the CASR Part 147 Manual of Standards.

Individuals being assessed who have already attained MEA293 Remove and install aircraft electronic system components will have covered a significant amount of the skill and knowledge requirements for this unit plus part of the performance criteria for Elements 1 and 2 and associated range of conditions items. Those who have attained MEA276 Maintain basic light aircraft communication and radio navigation systems and components, or MEA297 Maintain basic avionic systems and components, will have fully covered the requirements for this unit in common variables in the Range of Conditions. The Log of Industrial Experience and Achievement records relating to MEA293 Remove and install aircraft electronic system components, MEA276 Maintain basic light aircraft communication and radio navigation systems and components and MEA297 Maintain basic avionic systems and components may be accepted as also meeting the evidence requirements for this unit in the applicable areas.

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=ce216c9c-04d5-4b3b-9bcf-4e81d0950371