LMT30707 Certificate III in Footwear Production

Release: 2

LMT30707 Certificate III in Footwear Production

Modification History

Release 2 - imported units updated to current versions, outcomes equivalent.

Description

Job roles/employment outcomes

Certificate III reflects vocational outcomes for those performing supervision roles, specialised technical tasks or multi-skilled roles within a production oriented work environment.

Application

This qualification is typically used to develop skill and knowledge in the application of specialised technical, operational and supervisory skills within footwear production enterprises.

Pathways Information

Pathways into the qualification

Direct entry into this qualification requires completion of a total of nineteen (19) units of competency according to the rules described below.

Credit may be granted towards this qualification by those who have completed LMT20907 Certificate II in Footwear Production (Intermediate), LMT21007 Certificate II in Footwear Production (Complex or Multiple Processes) or achieved equivalent industry experience.

Pathways from the qualification

Further training pathways from this qualification include LMT40407 Certificate IV in Custom-made Footwear, MSA41108 Certificate IV in Competitive Manufacturing, or other relevant manufacturing qualifications.

Licensing/Regulatory Information

There are no specific licences that relate to this qualification. However, some units in this qualification may have licensing or regulatory requirements in some environments. Local regulations should be checked for details.

Entry Requirements

Not applicable.

Employability Skills Summary

EMPLOYABILITY SKILLS QUALIFICATION SUMMARY
Employability Skills Summary - Certificate III in Footwear Production The following table contains a summary of the Employability Skills as identified by the footwear production industries for this qualification. This table should be interpreted in conjunction with the detailed requirements of each unit of competency packaged in this qualification. The outcomes described here are broad industry requirements that reflect skill requirements for this level.
Employability Skill	Industry/enterprise requirements for this qualification include:
Communication	complete written documents, job cards, forms and timesheets use communication technologies efficiently communicate production abnormalities demonstrate effective and appropriate communication and interpersonal skills when dealing with people from a range of backgrounds read, interpret and communicate production schedules communicate with all team members
Teamwork	work cooperatively with people of different ages, gender, race or religion liaise with and provide support to other team members work as part of a team keep team members informed of changes to work practices identify team performance required to meet customer needs provide leadership to others in the team encourage the sharing of information between team members plan and support team activities
Problem-solving	identify and report problems and make contributions to their solution investigate problem causes implement changes examine materials for damage, missing components or other defects identify and promptly address problems or issues assess quality of work pieces determine effective work practices provide problem solving support to team members problem solve machine operational and maintenance requirements identify and report potential environmental hazards
Initiative and enterprise	seek and provide feedback on procedures gather and analyse information record information on the quality and other indicators of production performance adjust and implement production schedules changes provide leadership identify and implement process improvements coordinate work activities and manufacturing processes monitor workplace performance use analytical and decision making skills
Planning and organising	identify hazards and implement appropriate hazard control measures organise self and others to meet production schedules identify and rectify stock shortages in advance sequence work to maximise safety and productivity select and use appropriate tools and equipment determine materials, quality and production requirements monitor resource use in own work apply time management skills to ensure work flow
Self-management	interpret and apply relevant acts and regulations keep the work area clean and tidy at all times conduct regular housekeeping activities understand own work activities manage own time and establish own work schedule develop and implement workplace procedures and instructions locate, interpret and apply information relevant to own work monitor and evaluate own work quality conduct work in a manner which minimises waste accept responsibility for quality of work
Learning	develop learning activities as appropriate assess competencies in meeting job requirements identify own training needs and seek skill development if required listen to feedback from others identify sources of information to expand knowledge and understanding identify and address skill development needs of others in the team
Technology	use software applications effectively properly start up, operate and shut down machines work with technology safely and according to workplace standards carry out pre-operational checks on equipment and machines operate equipment and machines safely, efficiently and to productivity requirements monitor and adjust machine functions perform machine maintenance as determined by workplace procedures clean and check equipment and machines

Packaging Rules

To be awarded the Certificate III in Footwear Production, competency must be achieved in nineteen (19) units of competency.

Five (5) core units of competency

Fourteen (14) elective units of competency as specified below.

If Certificate II in Footwear Production (Complex or Multiple Processes) has been achieved, an additional six (6) units are required. All core units listed must be achieved - any Certificate III core units not achieved at Certificate II must be completed as part of the additional six (6) units required for Certificate III. Units that have been credited towards lower level qualifications must not be selected in the additional six (6) unit requirement. A minimum of three (3) of the six (6) units must be selected from the Group A or B units.

Note: Where prerequisite units apply, these have been noted, and must be considered in the total number of units.

CORE UNITS

Complete all five (5) units from this list

Unit code	Unit title
LMTFP2001B	Identify materials used in footwear production
LMTGN2001B	Follow defined OH&S policies and procedures
LMTGN2002B	Apply quality standards
LMTGN2003B	Work in the Textiles, Clothing and Footwear industry
MSAENV272B	Participate in environmentally sustainable work practices

ELECTIVE UNITS

Select fourteen (14) units as specified below.

A minimum of two (2) units must be selected from Group A

A minimum of one (1) unit must be selected from Group B

A maximum of two (2) units may be selected from Group D

A maximum of three (3) units may be selected from Group E

The remainder must be selected from Groups A, B and C.

NOTE: Competitive Manufacturing Training Package units, identified in Group D as MSACM coded units, should be selected on the basis of work requirements. Those at Certificate II level (units in the 200 series) are appropriate for operators. MSACM units for those in Certificate III level positions such as team leaders should be selected from both the 200 series and the 400 series.

GROUP A

Unit code	Unit tile	Prerequisites
LMTFP3001B	Cut leather by hand
LMTFP3002B	Hand last shoe
LMTFP3003B	Assemble shoe by hand	LMTFP2001B
LMTFP3004B	Contribute to footwear production improvement processes	LMTGN2002B
LMTFP3005B	Supervise footwear production operations
LMTFP3006B	Apply foot anatomy principles to footwear production

GROUP B

Unit code	Unit tile	Prerequisites
LMTFP3001B	Cut leather by hand
LMTFP3002B	Hand last shoe
LMTFP3003B	Assemble shoe by hand	LMTFP2001B
LMTFP3004B	Contribute to footwear production improvement processes	LMTGN2002B
LMTFP3005B	Supervise footwear production operations
LMTFP3006B	Apply foot anatomy principles to footwear production
LMTGN3001B	Control production in a section of a Textiles, Clothing and Footwear enterprise
LMTGN3002B	Organise and plan own work to achieve planned outcomes
LMTGN3003B	Estimate and cost job
LMTLG3005A	Grade leather

GROUP C

Unit code	Unit tile	Prerequisites
LMTFP2001B	Identify materials used in footwear production
LMTFP2002B	Perform stuff cutting
LMTFP2003B	Cut printed materials by machine
LMTFP2004B	Cut non printed leather by machine
LMTFP2005B	Operate machine to sew upper
LMTFP2006B	Machine upper according to product requirements	LMTFP2005B
LMTFP2007B	Last shoe by machine
LMTFP2008B	Perform moulding operations
LMTFP2009B	Perform footwear finishing operations
LMTFP2010B	Repair footwear product
LMTFP2011B	Perform table-based operations
LMTGN2004B	Work in a team environment
LMTGN2005B	Perform minor maintenance
LMTGN2006B	Perform test or inspection to check product quality
LMTGN2007B	Select, transfer and remove materials and products
LMTGN2008B	Coordinate work of team or section
LMTGN2009B	Operate computing technology in a Textiles, Clothing and Footwear workplace
LMTGN2010B	Perform tasks to support production

GROUP D

Unit code	Unit tile	Prerequisites
MSS402010A	Manage the impact of change on own work
MSS403010A	Facilitate change in an organisation implementing competitive systems and practices
MSS402001A	Apply competitive systems and practices
MSS402002A	Sustain process improvements
MSS403001A	Implement competitive systems and practices
MSS403002A	Ensure process improvements are sustained
MSS402020A	Apply quick changeover procedures
MSS402021A	Apply Just in Time procedures
MSS402030A	Apply cost factors to work practices
MSS402031A	Interpret product costs in terms of customer requirements
MSS402040A	Apply 5S procedures
MSS402050A	Monitor process capability
MSS402060A	Use planning software systems in operations
MSS402061A	Use SCADA systems in operations
MSACMT270A	Use sustainable energy practices
MSS402080A	Undertake root cause analysis
MSS402081A	Contribute to the application of a proactive maintenance strategy
MSS403021A	Facilitate a Just in Time system
MSS403030A	Improve cost factors in work practices
MSS403032A	Analyse manual handling processes
MSS403040A	Facilitate and improve implementation of 5S
MSS404050A	Undertake process capability improvements	MSS404052A
MSS403051A	Mistake proof an operational process
MSS404052A	Apply statistics to operational processes
MSS404060A	Facilitate the use of planning software systems in a work area or team	MSS402060A
MSS404061A	Facilitate the use of SCADA systems in a team or work area
MSS404081A	Undertake proactive maintenance analyses
MSS404082A	Assist in implementing a proactive maintenance strategy
MSAENV472B	Implement and monitor environmentally sustainable work practices

GROUP E

Other Footwear Production units that are available at Certificates II (maximum 1 unit) and III (maximum 3 units)
Other TCF Training Package units that are available at Certificates II (maximum 1 unit), III (maximum 3 units) and IV (maximum 1 unit)
Units from other endorsed Training Packages and accredited courses that are available at Certificates II (maximum 1 unit), III (maximum 3 units) and IV (maximum 1 unit)