LMFID5009A Research and recommend colour and applied finishes

Revision Number: 1

LMFID5009A Research and recommend colour and applied finishes

Modification History

Not applicable.

Unit Descriptor

Unit descriptor	This unit specifies the outcomes required to research and recommend colour and applied finishes to achieve special effects for interior decoration and design solutions.

Application of the Unit

Application of the unit	This unit supports the attainment of skills and knowledge required for competent research and recommendation of colour and applied finishes including a range of specialist painting and finishing effects, using research methodologies to identify the latest technologies. This unit requires employability skills in initiative and enterprise and problem solving in order to direct the research and selection of materials to achieve desired effects. Communication skills are used to access and interpret information using information technologies and complete required documentation. Self management and learning skills are applied in the review of information and arrangements to ensure project needs are met.

Licensing/Regulatory Information

Not applicable.

Pre-Requisites

Prerequisite units
LMFID4001A	Research, analyse and apply colour for interior spaces

Employability Skills Information

Employability skills	This unit contains employability skills.

Elements and Performance Criteria Pre-Content

Elements describe the essential outcomes of a unit of competency.	Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide.

Elements and Performance Criteria

ELEMENT	PERFORMANCE CRITERIA
1. Analyse project requirements	1.1. Applicable OHS, legislative and organisational requirements relevant to researching and recommending colour and applied finishes are verified and complied with 1.2. Project brief is reviewed and analysed to determine desired effects for interior space 1.3. Aesthetic requirements of the space are assessed 1.4. Tactile requirements of the desired effect in relation to the design are analysed 1.5. Client requirements and desired effects are reviewed, confirmed and clarified
2. Research colour and applied finishes	2.1. Social, psychological, cultural and historical relationships of colour are researched in relation to their interior decoration uses and applications 2.2. Colour trends are researched to ascertain the latest colour fashions and influences 2.3. New technologies are researched and reported 2.4. Application methods and available expertise for the desired effect are assessed 2.5. Application processes and techniques, and available expertise for the desired effect are assessed 2.6. Costs of materials and application methods are assessed and compared 2.7. Environmental impact of materials and application methods are assessed 2.8. Longevity and restorability of materials and application methods are researched 2.9. Hazards associated with the use and application of materials are researched 2.10. Quality of materials and application methods are assessed 2.11. Sources or suppliers of coloured products or finishes are found and recorded
3. Recommend colour and applied finishes	3.1. Research information is critically analysed in the context of the design brief requirements 3.2. Effects are examined in terms of elements and principles of design to determine fit for client requirements 3.3. Experimentation with colour and applied finishes is undertaken to refine and test material and application methods 3.4. Colour products and finishes are selected according to the style, size, lighting and intended use of the space 3.5. Paint finishes are selected to suit surface types, location and spaces 3.6. Application methods are selected and specified to meet client requirements 3.7. Presentation of research information is made, highlighting the findings and rationale for the materials and application methods chosen

Required Skills and Knowledge

REQUIRED SKILLS AND KNOWLEDGE
This section describes the skills and knowledge required for this unit.
Required skills
collecting, organising and understanding information related to work briefs, basic plans and safety procedures communicating ideas and information accurately recording and maintaining information using computer operations for internet access and searches analysing performance characteristics comparing findings communicating with suppliers maintaining accurate records clarifying and checking taskrelated information carrying out work according to OHS practices recognising and responding to circumstances outside instructions or personal competence efficiently and safely contributing to innovative interior decoration and design processes using mathematical ideas and techniques to correctly complete measurements, calculate area and volume, and estimate other material requirements maintaining current knowledge of interior decoration and design techniques using the workplace technology related to the use of tools including calculators, measuring and recording devices
Required knowledge
State or Territory OHS legislation, regulations, standards and codes of practice relevant to researching and recommending materials and application methods organisational and site standards, requirements, policies and procedures for researching and recommending materials and application methods elements and principles of design aesthetic values types of tools and equipment and procedures for their safe use, operation and maintenance characteristics of materials, products and defects computer programs research techniques effects of finishes and finishing techniques colour theory storage systems and labelling procedures for the recording, reporting and maintenance of workplace records and information appropriate mathematical procedures for estimation and measurement environmental protection requirements established communication channels and protocols problem identification and resolution

Evidence Guide

EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit	Effectively research and select colour and applied finishes to arrive at a solution which meets client requirements for a minimum of two projects Visually present scheme to illustrate how ideas meet overall design requirements Effectively apply design elements and principles to the research and selection of colour and applied finishes Effectively research and select colour and applied finishes in accordance with the concepts and design brief Comply with legislation, regulations, standards, codes of practice and established safe practices and procedures for researching and recommending colour and applied finishes Communicate effectively and work safely with others in the work area
Context of and specific resources for assessment	The application of competency is to be assessed in the workplace or realistically simulated workplace Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints Assessment of essential underpinning knowledge, other than confirmatory questions, will usually be conducted in an off-site context Assessment is to comply with relevant regulatory or Australian Standards requirements The following resources should be made available: workplace location or simulated workplace materials and equipment relevant to researching and recommending finishes specifications and work instructions
Method of assessment	Assessment must satisfy the endorsed assessment guidelines of the Furnishing Industry Training Package Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application Assessment may be applied under project related conditions (real or simulated) and require evidence of process Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances Assessment may be in conjunction with assessment of other units of competency
Guidance information for assessment

Range Statement

RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
OHS requirements	are to be in accordance with Commonwealth, State or Territory legislation and regulations, organisational safety policies and procedures. Requirements may include but not be limited to the use of personal protective equipment and clothing, fire fighting equipment, first aid equipment, hazard and risk control and elimination of hazardous materials and substances, manual handling including lifting and carrying
Legislative requirements	are to be in accordance with applicable legislation from all levels of government that affect organisational operation. Requirements may include but not be limited to award and enterprise agreements, industrial relations, Australian Standards, confidentiality and privacy, OHS, the environment, equal opportunity, anti-discrimination, relevant industry codes of practice, duty of care and heritage
Organisational requirements	may include but not be limited to legal, organisational and site guidelines, policies and procedures relating to own role and responsibility, quality assurance, procedural manuals, quality and continuous improvement processes and standards, OHS, emergency and evacuation, ethical standards, recording and reporting, access and equity principles and practices, equipment use, maintenance and storage, environmental management (waste disposal, recycling and re-use guidelines)
Colour and applied finishes	may include but not be limited to paints, waxes, lacquers, stains, pigments, oils, traditional finishes, plastic coatings, UV protected coatings, liquid coatings, synthetic coatings, synthetics, paper, glass, vinyls, textiles, laminates, plastics, stainless steel, metals, veneers, ceramics and stone based products, application techniques and new and emerging technologies
Project brief	may include but not be limited to client needs and objectives, client aims and objectives and criteria for evaluation, milestones, organisational or personal profiles and aims, image requirements and function, target market, budget, timeline, consultation requirements and colour requirements
Aesthetics	may include but not be limited to the consideration of appeal to a large number of people; products are pleasing to the eye of many who view it
Tactile	may include but not be limited to that perceived by the sense of touch and producing the effect of three-dimensional depth
Cultural	may include but not be limited to demography, geography (local, regional, national), religious, climatic, societal, cultural, lifestyle, attitudinal, gratification, honour, living conditions, infrastructure, status and habitude
Historical	may include but not be limited to colour study of early civilisation, Berlin & Kay, Aristotle, Newton, Hippocrates, Leonardo Da Vinci, the Renaissance, Goethe's theory of colours, Chevreul, Bauhaus School
Trends	may include but not be limited to new directions resulting from events that are at times subtle and others significant. Colour trends develop the same way. Colour experts gather information from around the world and study changing events and ideas to produce a comprehensive colour story, in the same way that designers seek unique styles and incorporate current philosophies into their work
Application methods	may include but not be limited to spraying, painting, applicators, gluing, vacuum wrapping, rubbing and bonding
Costs	may include but not be limited to the cost of products and materials together with the cost of obtaining them either locally, interstate or overseas
Environmental impact	may include but not be limited to how the making and use of finishes and materials effects the environment and how its continued use will effect those around you, energy consumption in applying the material, greenhouse gases created, waste levels and resource utilisation. Similarly what impact will be felt by reducing or stopping use of the finish or materials
Longevity and restorability	may include but not be limited to an analysis of how long the finish or material is expected to last, while maintaining quality of aesthetic value and how readily the finish or material can be upgraded, repaired or replaced
Hazards	may include but not be limited to toxins and gases released by some finishes, glues and materials which may be harmful to people if not used correctly
Sources	may include but not be limited to paint shops, suppliers, wholesalers, retailers, manufacturers and designers
Products	may include but not be limited to furniture, soft furnishings, floor treatments, curtain treatments, built-in cabinetry or fittings, light fittings, lamps, picture framing, tapware, laundry fittings, bathroom fittings, toilet fittings and kitchen fittings
Finishes	may include but not be limited to paints, waxes, lacquers, stains, pigments, oils, plastic coatings, veneers, ceramics, stone, glass, textiles and other textures
Critical analysis	may include but not be limited to comparing, contrasting, reflecting, critiquing, considering merit, discussion and debate
Elements of design	may include but not be limited to line, shape, form (geometric or organic), texture, and colour
Principles of design	may include but not be limited to balance, proportion (symmetry, asymmetry), harmony, contrast, pattern, movement, rhythm, unity, style, focus, scale, dominant, sub-dominant or subordinate relationship, emphasis, proximity, alignment, space, anthropometry, ergonomics, arrangement, aesthetic relations, tension and development methods

Unit Sector(s)

Unit sector	Interior decoration and design.

Competency field

Competency field

Co-requisite units

Co-requisite units