LMFGG3021A Prepare and install mirrors and glass splashbacks

Release: 1

LMFGG3021A Prepare and install mirrors and glass splashbacks

Modification History

New unit, based on LMFGG3014B. Outcome not equivalent.

Unit Descriptor

This unit of competency covers the skills and knowledge required to prepare and install mirrors and glass splashbacks.

Application of the Unit

This unit requires individuals to demonstrate discretion, judgement and problem solving in the planning, processing and installation of mirrors and glass splashbacks. Work is generally performed individually or in a team environment, with general supervision, and may be part of a production process.

Licensing/Regulatory Information

Not applicable.

Pre-Requisites

Not applicable.

Employability Skills Information

This unit contains employability skills.

Elements and Performance Criteria Pre-Content

Elements describe the essential outcomes of a unit of competency.	Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide.

Elements and Performance Criteria

1	Identify and plan work requirements	1.1	Work requirements in the form of type, pattern/plan and quantity of mirrors or glass splashbacks to be prepared and installed are identified from work instructions
1.2	Occupational health and safety (OHS) requirements for fabrication and installation of mirrors and glass splashbacks, including personal protective equipment, are observed throughout the work
1.3	Work sequence is planned in a logical order to suit the job and workplace procedures
1.4	Quantities of materials required are calculated from plans or work instructions or by measuring the installation site
1.5	Fixing and joining devices or materials are selected in accordance with specifications or type of materials to be joined and the surface on which the mirror or splashback is to be installed
1.6	Tools and equipment suitable to the work method are identified

2	Prepare for work	2.1	Compatible materials, fixings, fasteners, tools and equipment needed to complete the work are selected and checked prior to use to ensure they are appropriate for the work, serviceable and in a safe condition
2.2	Components of the mirror or splashback are checked against specifications or job order for size, quantity, finish and profile

3	Fabricate and install mirrors and glass splashbacks	3.1	Frame, if required, is fabricated in accordance with workplace procedures or industry practice
3.2	Mirror or splashback glass is cut to size in accordance with workplace procedures and industry practice
3.3	Mirror or splashback is edgeworked, if required, in accordance with workplace procedures or industry practice
3.4	Holes, where required, are drilled in frame, mirror or splashback in accordance with the plan, workplace procedures and industry practice
3.5	Glass splashbacks are finished according to customer specifications
3.6	Mirror or splashback is installed using appropriate fixing method in accordance with workplace procedures and industry practice

4	Complete work	4.1	Installed mirror or splashback is inspected for quality of work and repaired, re-fabricated or reinstalled, as required in accordance with workplace procedures
4.2	Waste, unused and scrap material is removed for disposal or recycling, as required
4.3	Work area is cleaned and rubbish disposed of, as appropriate
4.4	Tools, equipment and unused materials are removed and stored appropriately according to workplace requirements
4.5	Workplace documentation is completed in accordance with workplace procedures

Required Skills and Knowledge

This section describes the skills and knowledge required for this unit.
Required skills include: collecting, organising and understanding information related to work orders, basic plans and safety procedures using communication skills to the level required to confirm work requirements and specifications; communicate effectively regarding work requirements with supervisors, other workers and customers; report work outcomes and problems; and relate to people from a range of social, cultural and ethnic backgrounds and of varying physical and mental abilities using literacy skills to the level required to understand information related to work orders, including common industry terminology, plans and safety procedures; prepare reports; and interpret technical information and specifications planning and organising activities, including the preparation and layout of the work area, and the obtaining of equipment and materials to avoid any backtracking, workflow interruptions or wastage working with others and in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity using mathematical ideas and techniques to correctly complete measurements, calculate work requirements, and optimise glass sizes for economical cutting and assembling of required materials using pre-checking and inspection techniques to plan work, and avoid re-working and wastage using workplace technology related to the fabrication and installation of mirrors and glass splashbacks applying different glass splashbacks finishes to specification modifying activities to cater for variations in workplace contexts and environment
Required knowledge includes: workflow requirements in relation to the processing and installation of mirrors workplace safety system requirements related to the processing and installation of mirrors and glass splashbacks characteristics of materials used and uses of products produced identification of equipment, processes and procedures related to the fabrication and installation of mirrors and glass splashbacks relevant Australian Standards, including minimum proximity of glass splashbacks to gas cooking appliances

Evidence Guide

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment	Assessment processes and techniques must be culturally appropriate and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.
Critical aspects for assessment and evidence required to demonstrate competency in this unit	Assessors must be satisfied that the candidate can competently and consistently: interpret work order/job instruction and locate and apply relevant information to process and install mirrors and glass splashbacks apply safe handling requirements for equipment, products and materials, including use of personal protective equipment follow work instructions, operating procedures and inspection practices to: minimise the risk of injury to self and others prevent damage to goods, equipment and products maintain required product quality as a minimum: measure for mirror and glass splashback installations cut mirror and glass up to 8 mm, including vinyl backed carry out edge working prepare walls for installation of mirrors and glass splashbacks construct and fit mirrors and glass splashbacks, which may include frames cut and drill holes in mirrors and glass splashbacks to cut-out specifications identify and use spirit and/or laser levels set plumb and level lines fit framed and/or unframed, wall, safety and/or security mirrors, including return mirrors with minimal deflection finish and fit glass splashbacks to specification clean and present finished mirrors and/or glass splashbacks work effectively with others.
Context of and specific resources for assessment	The application of competency is to be assessed in the workplace or realistically simulated workplace. Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints. Assessment of essential underpinning knowledge, other than confirmatory questions, will usually be conducted in an off-site context. Assessment is to comply with relevant regulatory or Australian Standard requirements. The following resources should be made available: mirror and splashback specifications mirrors aluminium framing material toughened glass for splashbacks splashback finishing materials and equipment fixing/fasteners workplace operating procedures personal protective equipment an appropriate work area.
Method of assessment	Assessment must satisfy the endorsed Assessment Guidelines of the LMF02 Furnishing Industry Training Package. Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge. Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure correct interpretation and application. Assessment may be applied under project-related conditions (real or simulated) and require evidence of process. Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances. Assessment may be in conjunction with assessment of other units of competency.
Guidance information for assessment

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Mirrors may include:	framed frameless wall return safety and security mirrors tinted
Glass splashbacks may include	framed frameless wall return toughened (tempered) clear or low iron glass used in: kitchens bathrooms laundries (wet areas) feature walls
Personal protective equipment includes:	that prescribed under legislation, regulation and enterprise policies and practices, and may include: gauntlets gloves safety glasses hard hats safety footwear aprons and overalls
Workplace procedures include:	workplace procedures relating to the fabrication and installation of mirrors and glass splashbacks equipment or tool manufacturer specifications and operational procedures work instructions, including job sheets, plans, cutting lists, drawings and designs safety standards, including personal protective equipment, OHS regulations and enterprise requirements Australian Standards: AS 1288:2006 Glass in buildings - Selection and installation AS/NZS 4667:2000 Quality requirements for cut-to-size and processed glass AS 2047:1999 Windows in buildings - Selection and installation
Materials may include, but are not limited to:	timber and metal framing materials float and vinyl backed mirrors fixings and fasteners paint and other finishes for glass splashbacks
Tools and equipment may include:	tungsten wheel glass cutters speed cutters straight edges and squares plate and running pliers glass lifting and handling equipment personal safety equipment glass edging equipment diamond drills and saws water spirit level dumpy and laser levels plumb bobs chalk lines tape measures portable drills general hand tools paint and digital print application equipment light emitting diode (LED) backlighting installation tools
Fixings and fasteners may include:	adhesive tapes screws and rosettes mirror and spring clips hollow wall fasteners rawl plugs cloth and glues and non-acidic silicones
Holes may be required for:	power points switches warning lights other cut-outs in specifications
Splashback finishes may include:	painted: solid metallic satin sparkle gilded digitally printed images mirrored sandblasted tinted LED back-lit

Unit Sector(s)

Glass and glazing

Custom Content Section

Not applicable.