LMFFM3001B Construct chair and couch frames

Revision Number: 1

LMFFM3001B Construct chair and couch frames

Modification History

Not applicable.

Unit Descriptor

Unit descriptor	This unit covers the competency to construct and assemble chair and couch frames

Application of the Unit

Application of the unit

Licensing/Regulatory Information

Not applicable.

Pre-Requisites

Prerequisite units	Nil

Employability Skills Information

Employability skills	This unit contains employability skills.

Elements and Performance Criteria Pre-Content

Elements describe the essential outcomes of a unit of competency.	Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide.

Elements and Performance Criteria

ELEMENT	PERFORMANCE CRITERIA
1. Prepare for work	1.1. Work instructions are used to determine job requirements, including design, tolerances, process, materials, finish and quantity 1.2. Construction and assembly sequence is planned 1.3. Procedures are determined for checking quality at each stage of the process 1.4. Workplace health and safety requirements, including personal protection needs, are observed throughout the work 1.5. Suitable work area is selected for the task 1.6. Preparatory drawings/set-outs for tasks are completed 1.7. Cutting list for components is developed 1.8. Materials are selected following work instructions 1.9. Tools and equipment suitable for construction are identified and checked for safe and effective operation
2. Complete construction	2.1. Material is set out and prepared according to work instructions and components are marked according to workplace procedures 2.2. Tools, machines and equipment are used in accordance with safety requirements and manufacturers' specifications 2.3. Components are manufactured including any specified shapes, angles or curves and checked against set-outs and job requirements 2.4. Components are assembled using jigs and/or clamps and fastenings 2.5. Adhesives are applied according to workplace procedures and/or manufacturers' instructions 2.6. Joining process is undertaken according to workplace procedures 2.7. Assembled chair/couch is checked for compliance with specifications 2.8. Item is finished to suitable state for surface preparation 2.9. Any non-conformity with the required quality standards is rectified
3. Finalise operation and maintain equipment	3.1. Faulty and/or defective equipment is tagged and reported in accordance with workplace practices 3.2. Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures 3.3. Off-cuts and unused materials are collected and stored for reuse or disposed following workplace procedures 3.4. Waste and scrap materials are dealt with following workplace procedures

Required Skills and Knowledge

REQUIRED SKILLS AND KNOWLEDGE
This section describes the skills and knowledge required for this unit.
Required skills
collect, organise and understand information related to work orders, plans and safety procedures communicate ideas and information to enable confirmation of work requirements and specifications, coordination of work with site supervisor, other workers and customers, and the reporting of work outcomes and problems plan and organise activities, including the preparation and layout of the worksite and the obtaining of equipment and materials to avoid any back tracking, workflow interruptions or wastage work with others and in a team by recognising dependencies and using cooperative approaches to optimise workflow and productivity use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements use pre-checking and inspection techniques to anticipate construction problems, avoid reworking and avoid wastage use the limited workplace technology related to the construction, including tools, equipment, materials and measuring devices
Required knowledge
the interpretation of plan representation of furniture design the preparation of drawings/set-outs workflow in relation to furniture production identification of hand and/or power tools, materials, equipment, processes and procedures

Evidence Guide

EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical Aspects of Evidence	Interpret work order and locate and apply relevant information Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment Follow work instructions, operating procedures and inspection practices to: minimise the risk of injury to self or others prevent damage to goods, equipment or products maintain required production output and product quality Construct at least three significant chair and couch frames Work effectively with others Modify activities to cater for variations in workplace contexts and environment
Resource Implications	Access to plans, hand and/or power tools, equipment, materials, cauls and jigs, woodworking machinery, and a work area.
Method of Assessment	Assessment methods must confirm consistency of performance over time and in a range of workplace relevant contexts. Assessment should be by direct observation of tasks and questioning on underpinning knowledge. Assessment should be conducted over time and may be in conjunction with assessment of other units of competency.
Context of Assessment	Assessment may occur on the job or in a workplace simulated facility with relevant process equipment, materials, work instructions and deadlines.

Range Statement

RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Chair and couch frames may include but are not limited to:	dining chairs office chairs lounge chairs sofas/settees
Unit context	OH&S requirements include legislation, building codes, material safety management systems, hazardous substances and dangerous goods code and local safe operating procedures Work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements Work involves reading and interpreting plans, developing set-outs using hand and power tools, equipment and operating woodworking machinery Competency may be demonstrated in workplaces involved in the manufacture of solid timber furniture, domestic furniture, commercial furniture and/or furniture components
Tools and equipment may include, but are not limited to:	measuring tapes or rulers hammers mallets squares bevels chisels planes hand saws power saws cordless drills/screwdrivers power drills fixing and joining devices jigs clamping devices pinches
Machines may include, but are not limited to:	band saws cross cut saws docking saws mitre saws panel and rip saws surface planers (buzzers) panel planers (thicknessers) lacey sanders horizontal borers vertical drill presses edge sanders pedestal grinders wood turning lathes presses
Materials to be used may include but not limited to:	timber manufactured board adhesives screws nails bolts dowels metal fasteners steel plastics
Checking of constructed product is to cover:	squareness alignment wind and hardware fittings and attachments
Personal protective equipment	Personal protective equipment is to include that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures	Workplace procedures relating to the use of tools and equipment Work instructions, including job sheets, cutting lists, plans, drawings and designs Workplace procedures relating to reporting and communication Manufacturers' specifications and operational procedures

Unit Sector(s)

Unit sector	Furniture Making

Competency field

Competency field

Co-requisite units

Co-requisite units