LMFFL3406A Apply emulsion wax

Revision Number: 1

LMFFL3406A Apply emulsion wax

Modification History

Not applicable.

Unit Descriptor

Unit descriptor	This unit specifies the outcomes required to select emulsion wax coating systems appropriate for the job, to prepare for the work and to apply selected coatings.

Application of the Unit

Application of the unit	This unit supports the attainment of skills and knowledge required for competent workplace performance in the wide variety of flooring technology operations. The competency applies to an on site environment and involves application of skills and knowledge at a trade worker level. These skills and knowledge are to be used within the scope of the individual's job and authority.

Licensing/Regulatory Information

Not applicable.

Pre-Requisites

Prerequisite units	Nil

Employability Skills Information

Employability skills	This unit contains employability skills.

Elements and Performance Criteria Pre-Content

Elements describe the essential outcomes of a unit of competency.	Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the required skills and knowledge section and the range statement. Assessment of performance is to be consistent with the evidence guide.

Elements and Performance Criteria

ELEMENT	PERFORMANCE CRITERIA
1. Identify and prepare for work requirements	1.1. Applicable legislative, OHS and organisational requirements relevant to the application of finishes are verified and complied with 1.2. Instructions and/or plans are read and interpreted to identify process required to complete work tasks 1.3. Coating material is selected with regard to durability, longevity, aesthetics, manufacturer recommendations and the client's expectations 1.4. Selected coating materials are assessed as being compatible with each other, with the surface to be finished and with manufacturer recommendations 1.5. Tools, equipment and materials are selected and checked prior to use to ensure that they are appropriate for the work, serviceable and in a safe condition 1.6. Surface to be finished is inspected and assessed as being ready for coating 1.7. Work sequence is planned to ensure efficiency and quality of application 1.8. Workplace health and safety requirements, including isolation, ventilation and other personal protection needs, are observed throughout the work
2. Apply finishing system	2.1. Ventilation is checked before chemical fumes are released, and all OHS requirements are met including use of personal protective equipment 2.2. Environmental protection regulations are complied with 2.3. Coating material is prepared as per manufacturer specifications. 2.4. Coating material is applied in accordance with manufacturer recommendations 2.5. Recommended drying times between coats are observed 2.6. Buffing or sanding between coats, where required, is carried out according to manufacturer recommendations 2.7. Final finish meets the requirements of the job 2.8. Floor maintenance instructions and warranty provisions are provided to the client in accordance with workplace procedures
3. Complete housekeeping	3.1. Unused materials are resealed and stored 3.2. Tools and equipment are cleaned, maintained and stored 3.3. Work area is cleaned and waste material is removed and disposed of safely 3.4. Barriers and signs are removed and stored 3.5. Workplace documentation/reporting is completed

Required Skills and Knowledge

REQUIRED SKILLS AND KNOWLEDGE
This section describes the skills and knowledge required for this unit.
Required skills
Collect, organise and understand information related to work orders, basic plans and safety procedures Communicate ideas and information to enable confirmation of work requirements and specifications, coordination of work with site supervisor, other workers and customers, and the reporting of work outcomes and problems Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity Use pre-checking and inspection techniques to anticipate coating problems to avoid re-work and wastage Recognise and respond to circumstances outside instructions or personal competence Plan and organise activities including the preparation and layout of the worksite and the obtaining of equipment and materials to avoid any back tracking, work flow interruptions or wastage Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate coating material requirements Clarify and confirm work instructions Plan work within given task parameters Accept responsibility for given tasks Set, monitor and satisfy personal work goals Satisfy the competency requirements for the job Maintain current knowledge of: tools and materials emulsion and wax coating techniques seek learning opportunities use the workplace technology related to the application of finishes including tools, equipment, calculators and measuring devices interpret the technical specifications of materials and analyse their properties to optimise their use
Required knowledge
State or Territory OHS legislation, regulations, standards and codes of practice relevant to the application of finishing systems organisational and site standards, requirements, policies and procedures for finishing and coating methods of floor preparation from basic sanding to finishing sanding and edging characteristics of floor finishing in relation to ventilation, moisture content and reaction to change of temperature and relative humidity type, characteristics, uses and limitation of emulsion and wax coating materials, including manufacturer recommendations types and uses of floor finishing tools and equipment workplace safety systems related to floor finishing processes work flow in relation to the application of emulsion and wax coatings to timber floors environmental protection requirements established communication channels and protocols problem identification and resolution appropriate mathematical procedures for estimation and measurement procedures for the recording, reporting and maintenance of workplace records and information

Evidence Guide

EVIDENCE GUIDE
The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit	Comply with legislation, regulations, standards, codes of practice and established safe practices and procedures for applying finishes to timber, parquetry and cork floors Interpret work order and locate and apply relevant information Apply safe handling requirements for equipment, products and materials, including the use of personal protective equipment Establish and maintain appropriate ventilation Follow work instructions, operating procedures and inspection practices to: prevent damage to goods, equipment and products minimise the risk of injury to self and others achieve a final finish in accordance with Australian Standards and accepted industry practices Complete a minimum of: application of two different emulsion wax products to two different timber/cork flooring types Identify faults/problems and identify and carry out corrective action Work effectively with others Modify activities to cater for variations in workplace contexts and environment
Context of, and specific resources for assessment	The application of competency is to be assessed in the workplace or realistically simulated workplace Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints Assessment of essential underpinning knowledge, other than confirmatory questions, will usually be conducted in an off-site context Assessment is to comply with relevant regulatory or Australian Standards requirements The following resources should be made available: workplace location or simulated workplace a realistic finishing requirement materials and equipment relevant to the coating application specifications and work instructions
Method of assessment	Assessment must satisfy the endorsed assessment guidelines of the Furnishing Industry Training Package Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of underpinning knowledge Assessment methods must be by direct observation of tasks and include questioning on underpinning knowledge to ensure its correct interpretation and application Assessment may be applied under project related conditions (real or simulated) and require evidence of process Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances Assessment may be in conjunction with assessment of other units of competency

Range Statement

RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Legislative requirements	are to be in accordance with applicable legislation from all levels of government that affect organisational operation. Requirements may include but not be limited to award and enterprise agreements, industrial relations, Australian Standards, confidentiality and privacy, OHS, the environment, equal opportunity, anti-discrimination, relevant industry codes of practice, duty of care and heritage
OHS requirements	are to be in accordance with Commonwealth, State or Territory legislation and regulations, organisational safety policies and procedures. Requirements may include but not be limited to the use of personal protective equipment and clothing, fire fighting equipment, First Aid equipment, hazard and risk control and elimination, control of hazardous materials and substances, manual handling including lifting and carrying
Organisational requirements	may include but not be limited to legal, organisational and site guidelines, policies and procedures relating to own role and responsibility, quality assurance, procedural manuals, quality and continuous improvement processes and standards, OHS, emergency and evacuation, ethical standards, recording and reporting, access and equity principles and practices, equipment use, maintenance and storage, environmental management (waste disposal, recycling and re-use guidelines)
Instructions	Workplace procedures relating to use and operation of tools and equipment Workplace instructions, including job sheets, plans, drawings and designs Workplace procedures relating to reporting and communications Manufacturer recommendations for use of equipment and materials
Emulsion wax coating materials	may include but are not limited to emulsions with insoluble polymers suspended in water using emulsifiers to produce waterborne coatings of non-water soluble ingredients, which may have matt, satin or gloss finish depending on buffing procedures.
Tools and equipment	are to include rotary polishing machine, vacuum cleaner, brushes, applicators, rollers, roller tray.
Surfaces to be finished	may include traditional tongue and groove strip timber flooring, glue down or floating strip flooring, engineered timber flooring, cork flooring and block or mosaic parquetry flooring
Surface inspection	is to ensure that surface is free from dust and debris, moisture content is acceptable and stable and any preservatives, protective coatings or other contaminants are adequately removed
Work sequence	is to include preparation, inspection, coating application(s) and intermediate steps, finalisation and acceptance inspection
Workplace health and safety requirements	may include personal protective equipment which is to include that prescribed under legislation, regulation and enterprise policies and practices may include isolation processes including barriers, tapes and entry access controls may include breathing support and ventilation extraction systems
Application methods	may include brushes, rollers, applicators

Unit Sector(s)

Unit sector	Flooring Technology

Competency field

Competency field	Sanding and finishing

Co-requisite units

Co-requisite units