ICP30512 Certificate III in Printing and Graphic Arts (Printing)

Release 2

ICP30512 Certificate III in Printing and Graphic Arts (Printing)

Modification History

Release	Comments
Release 1	This Qualification first released with ICP10 Printing and Graphic Arts Training Package version 2.0. Core unit ‘BSBSUS301A Implement and monitor environmentally sustainable work practices’ replaced with ‘BSBSUS201A Participate in environmentally sustainable work practices’, and native and imported units updated. Replaces ICP30510 Certificate III in Printing and Graphic Arts (Printing).

Description

This qualification applies to individuals working as print machinists in the printing and graphic arts industry. Print machinists typically set up and operate letterpress, lithographic, flexographic, gravure printing presses, digital printers and work on a range of printed products. They prepare material, monitor and run equipment and machinery and apply solutions to a defined range of unpredictable problems. They may also provide leadership and guidance to others with some limited responsibility for the output of others.

Job Roles

Print machinist

Pathways Information

Pathways into the qualification

Candidates may enter the qualification with limited or no vocational experience and without a relevant lower level qualification. However, the preferred pathway for candidates entering this qualification is one of the following qualifications:

ICP20110 Certificate II in Printing and Graphic Arts (General)

ICP20210 Certificate II in Printing and Graphic Arts (Desktop Publishing)

ICP20410 Certificate II in Printing and Graphic Arts (Print Production Support).

Pathways from the qualification

At the completion of this qualification candidates could choose to enter a:

ICP40310 Certificate IV in Printing and Graphic Arts (Printing)

ICP40610 Certificate IV in Printing and Graphic Arts (Management/Sales)

ICP40710 Certificate IV in Printing and Graphic Arts (Process Leadership).

Licensing/Regulatory Information

There is no direct link between this qualification and licensing, legislative and/or regulatory requirements. However, where required, a unit of competency will specify relevant licensing, legislative and/or regulatory requirements that impact on the unit.

Units in Qualification with Prerequisites

Code and title	Prerequisite units required
ICPSU311C Prepare ink and additives (advanced)	ICPSU211C Prepare ink and additives
ICPPR387A Use colour management for production	ICPPR284A Introduction to colour management
ICPPR494A Apply advanced software applications to digital production	ICPPR385A Apply software applications to digital production

Entry Requirements

There are no entry requirements for this qualification.

Employability Skills Summary

The following table contains a summary of the Employability Skills required for this qualification. The Employability Skills facets described here are broad industry requirements that may vary depending on qualification packaging options.

Employability Skill	Industry/enterprise requirements for this qualification include:
Communication	negotiating requirements and methods of production with clients reading and interpreting job requirements using printing industry terminology and vocabulary correctly and accurately
Teamwork	operating production processes in association with fellow workers working with clients to decide on the best printing processes and ensure proofs meet their requirements
Problem solving	monitoring production quality and making minor adjustments to processes conducting a proof run, inspecting and testing the proof for quality and adjusting the printing machinery to ensure the product meets quality criteria
Initiative and enterprise	anticipating and rectifying production problems monitoring trends in the printing industry to inform personal work practices recommending improvements to quick changeover procedures
Planning and organising	selecting appropriate print processes and inks and additives collecting and assessing data about printing processes and machine specifications and how these interact
Self-management	following principles and obligations of copyright in personal work practices following procedures and using personal protective equipment correctly
Learning	giving and following simple routine instructions implementing and monitoring new technology and work processes
Technology	selecting and using printing processes based on knowledge of the capabilities and limitations of the processes using computerised control, monitoring and data entry systems using information technology, such as computer hardware and software to access data from files

Packaging Rules

Total number of units = 21 units

4 core units plus

11 elective units from Group A plus

of the remaining 6 elective units

Up to 2 elective units from Group A can be substituted with Group C elective units listed below.

1 elective unit must be selected from Group B elective units. The remaining elective units may be selected from Group C elective units.

1 elective unit may be selected from the remaining elective units or from qualifications at the same qualification level or one level higher, in this Training Package or any other endorsed Training Package or accredited course.

Elective units must be relevant to the qualification level, job role, work outcome and industry requirements. Unit selection is by negotiation and mutual agreement between the employee, employer and the RTO and is based on enterprise and individual needs.

Core Units

BSBSUS201A Participate in environmentally sustainable work practices

ICPSU216C Inspect quality against required standards

ICPSU260C Maintain a safe work environment

ICPSU262C Communicate in the workplace

Group A Elective Units

ICPKN312C Apply knowledge of printing machining OR

ICPKN321A Apply knowledge and requirements of digital production

ICPPR385A Apply software applications to digital production

ICPSU201C Prepare, load and unload reels and cores on and off machine* OR

ICPSU202C Prepare, load and unload product on and off machine*

ICPSU203C Prepare and maintain the work area

ICPSU207C Prepare machine for operation (basic)

ICPSU208C Operate and monitor machines (basic)

ICPSU211C Prepare ink and additives

ICPSU224C Perform basic machine maintenance

ICPSU263C Perform basic industry calculations

ICPSU281C Use computer systems

ICPSU323C Dispose of waste

ICPSU357C Apply quick changeover procedures

* Both of these units can be selected in this qualification, if the enterprise requires both.

Group B Elective Units

ICPPR392A Set up and produce specialised digital print

ICPPR413C Set up for complex flexographic printing

ICPPR421C Set up for complex gravure printing

ICPPR431C Set up for complex lithographic printing

ICPPR441C Set up for complex pad printing

ICPPR451C Set up for complex relief printing

ICPPR496A Set up and produce complex digital print

Group C Elective Units

BSBCUS301B Deliver and monitor a service to customers

ICAWEB429A Create a markup language document to specification

ICPCF221C Set up and produce basic guillotined product

ICPCF225C Set up machine for basic flat-bed die cutting or embossing

ICPCF226C Produce basic flat-bed die cut or embossed product

ICPCF231C Set up machine for basic flat-bed cutting

ICPCF232C Produce basic flat-bed cut product

ICPCF241C Set up machine for basic single or continuous folding

ICPCF242C Produce basic single or continuous folded product

ICPCF243C Set up machine for basic collating or inserting (sheet/section)

ICPCF244C Produce basic collated (sheet/section) product

ICPCF281C Set up machine for basic laminating

ICPCF282C Produce basic laminated product

ICPCF341C Set up machine for complex sequenced or multiple folding

ICPCF381C Set up machine for complex laminating

ICPCF382C Produce complex laminated product

ICPPP211C Develop a basic design concept

ICPPP252C Output images

ICPPP266C Produce relief plates

ICPPP267C Produce offset lithographic plates

ICPPP268C Make photopolymer plates (flexographic)

ICPPP269C Produce photopolymer plates for pad printing

ICPPP272C Produce gravure cylinders manually

ICPPP352C Output complex images

ICPPP370C Produce multiple image plates

ICPPP372C Produce gravure cylinders electronically

ICPPP397A Transfer digital images

ICPPR211C Mount and proof flexographic plates for basic printing

ICPPR214C Produce basic flexographic printed product

ICPPR222C Produce basic gravure printed product

ICPPR232C Produce basic lithographic printed product

ICPPR242C Produce basic pad printed product

ICPPR261C Set up for foil stamping

ICPPR262C Produce foil stamped product

ICPPR271C Set up for basic coating

ICPPR272C Produce basic coated product

ICPPR282C Produce and manage basic digital print

ICPPR284A Introduction to colour management

ICPPR288A Produce basic relief printed product

ICPPR313C Set up for basic flexographic printing

ICPPR314C Produce complex flexographic printed product OR

ICPPR321C Set up for basic gravure printing

ICPPR322C Produce complex gravure printed product OR

ICPPR331C Set up for basic lithographic printing

ICPPR332C Produce complex lithographic printed product OR

ICPPR341C Set up for basic pad printing

ICPPR342C Produce complex pad printed product OR

ICPPR382C Produce and manage complex digital print

ICPPR383C Prepare for personalised digital printing

ICPPR384A Set up and produce basic digital print OR

ICPPR394A Produce complex relief printed product

ICPPR385A Apply software applications to digital production

ICPPR386A Troubleshoot digital media

ICPPR387A Use colour management for production

ICPPR388A Preflight and import complex images for digital device

ICPPR389A Manage digital files

ICPPR390A Generate a proof for digital production

ICPPR393A Set up for basic relief printing

ICPPR494A Apply advanced software applications to digital production

ICPSP311C Reclaim screen manually

ICPSP215C Prepare screen

ICPSP222C Prepare and cut screen print substrate

ICPSP270C Manually prepare and produce screen prints

ICPSP273C Semi-automatically produce basic screen prints

ICPSP275C Automatically produce basic screen prints

ICPSP351C Prepare machine and drying/curing unit

ICPSP374C Operate a semi-automatic screen printing machine

ICPSP382C Produce computer image for screen printing

ICPSP383A Prepare film for complex screen printing

ICPSU212C Prepare coatings, adhesives

ICPSU221C Pack and dispatch product

ICPSU222C Pack and dispatch solid waste

ICPSU235C Lift loads mechanically

ICPSU236C Shift loads mechanically

ICPSU241C Undertake warehouse or stores materials processing

ICPSU271C Provide basic instruction for a task

ICPSU311C Prepare ink and additives (advanced)

ICPSU342C Undertake inventory procedures

ICPSU351C Undertake basic production scheduling

ICPSU362C Communicate as part of a work team

ICPSU381C Operate and maintain computer resources

MSACMC210A Manage the impact of change on own work

MSACMS200A Apply competitive manufacturing practices

MSACMS201A Sustain process improvements

MSACMT230A Apply cost factors to work practices

MSACMT240A Apply 5S procedures in a manufacturing environment

MSACMT280A Undertake root cause analysis

MSAENV272B Participate in environmentally sustainable work practices

MSAPMSUP390A Use structured problem solving tools