FPI30910 Certificate III in Timber Truss and Frame Design and Manufacture

Release: 1

FPI30910 Certificate III in Timber Truss and Frame Design and Manufacture

Modification History

Not Applicable

Description

Qualification Notes

Specialised Job Roles

RTO please note: Insert specialisation (job role) on certificate only if the industry recommended electives listed below are achieved

Industry strongly recommends the selection of particular electives to meet different job roles

Designer	Recommended electives for those working in design are:
1 unit from Group A plus 5 units from Group A or B plus 2 units from Group A, B or C or up to 2 relevant units may be selected from units recommended for packaging at Certificate II, Certificate III or Certificate IV in any endorsed Training Package or State/Territory accredited course
Production Fabricator	Recommended electives for those working in production are:
6 units from Group A, B or C plus 2 units from Group A, B or C or up to 2 relevant units may be selected from units recommended for packaging at Certificate II, Certificate III or Certificate IV in any endorsed Training Package or State/Territory accredited course

Pathways Information

Pathways advice

There is an entry requirement into FPI40410 Certificate IV in Timber Truss and Frame Design. For those seeking a pathway to this qualification, recommended elective units are:

FPICOT3204B	Prepare and interpret sketches and drawings
FPICOT3214B	Take off material quantities
FPICOT3218B	Quote and interpret from manufactured timber product plans
FPICOT3220B	Quote and interpret from computerised timber manufactured product plans
FPICOT3239B	Create drawings using computer aided design systems

Licensing/Regulatory Information

Not Applicable

Entry Requirements

Not Applicable

Employability Skills Summary

EMPLOYABILITY SKILLS QUALIFICATION SUMMARY
The following table contains a summary of the employability skills for this qualification. This table should be interpreted in conjunction with the detailed requirements of each unit of competency packaged in this qualification. The outcomes described here are broad industry requirements that may vary depending on the packaging options.
Employability Skill	Industry/enterprise requirements for this qualification include:
Communication	Communicate with management Gather, convey and receive information Convey instructions accurately Establish and maintain communication with others
Teamwork	Contribute to the effectiveness of the work team Participate in and facilitate the work team Make constructive contributions to the work team
Problem-solving	Solve routine problems Detect, assess and report hazards in the work area Review and report factors affecting the achievement of work tasks to appropriate personnel
Initiative and enterprise	Select equipment appropriate to work task Grade materials to best 'end use' Identify and assess organisational environmental goals
Planning and organising	Plan potential of materials to provide the highest value added return Plan product recovery to optimise resource value and minimise waste Prepare products for despatch
Self-management	Utilise own contribution to the work team Check own role and responsibilities with appropriate personnel Identify and prioritise work tasks within designated timeframes
Learning	Identify opportunities for professional development Actively seek feedback on performance Seek appropriate support to assist and improve own performance
Technology	Use relevant equipment Maintain and adjust machinery and equipment

Packaging Rules

Packaging Rules

Total number of units = 13

5	Core units plus

8	Elective units, with at least 6 from the list below. Up to 2 relevant units may be selected from units recommended for packaging at Certificate II, Certificate III or Certificate IV in any endorsed Training Package or State/Territory accredited course

CORE UNITS
Field	Unit Code	Unit Name
Core	FPICOR2201B	Work effectively in the forest and forest products industry
FPICOR2202B	Communicate and interact effectively in the workplace
FPICOR3201B	Implement safety, health and environment policies and procedures
FPICOR3202B	Conduct quality and product care procedures
BSBFLM312C	Contribute to team effectiveness
GROUP A ELECTIVE UNITS
Field	Unit Code	Unit Name
Forest	FPITMM3204A	Interpret designs to prepare timber roof truss drawings and documents using computers
FPITMM3205A	Interpret designs to prepare timber floor system drawings and documents using computers
FPITMM3206A	Interpret designs to prepare timber wall frame drawings and documents using computers
GROUP B ELECTIVE UNITS
Field	Unit Code	Unit Name
Forest	FPICOT3204B	Prepare and interpret sketches and drawings
FPICOT3214B	Take off material quantities
FPICOT3218B	Quote and interpret from manufactured timber product plans
FPICOT3220B	Quote and interpret from computerised timber manufactured product plans
FPICOT3239B	Create drawings using computer aided design systems
FPICOT4202B	Design timber structures
Construction	CPCCBC4001A	Apply building codes and standards to the construction process for low rise building projects
GROUP C ELECTIVE UNITS
Field	Unit Code	Unit Name
Forest	FPICOR3204B	Visually assess materials
FPICOT2235A	Assess timber for manufacturing potential
FPICOT3234B	Cut material using CNC sizing machines
FPICOT3235B	Machine material using CNC machining and processing centres
FPICOT3236B	Coordinate stock control procedures
FPICOT3241B	Assemble timber wall frames
FPICOT3242B	Lay up timber roof trusses
FPICOT3243B	Operate a truss press
FPICOT4203B	Plan and coordinate product assembly
FPICOT4204B	Schedule and coordinate load shifting
FPITMM2203A	Read and interpret timber truss, floor and/or frame fabrication plans
FPITMM3207A	Set up timber floor trusses
Business	BSBCUS301A	Deliver and monitor a service to customers
BSBCUS402A	Address customer needs
BSBFLM305C	Support operational plan
BSBINM301A	Organise workplace information
Construction	CPCCBC4014A	Prepare simple building sketches and drawings
CPCCCM1005A	Carry out measurements and calculations
Health and Safety	HLTFA301B	Apply first aid
HLTFA402B	Apply advanced first aid (unit has HLTFA301B Apply first aid as a pre-requisite)
Manufacturing	MSACMS200A	Apply competitive manufacturing practices
MSACMT432A	Analyse manual handling processes
MSACMT451A	Mistake proof a production process
MSAPMSUP390A	Use structured problem solving tools
Training	TAEDEL301A	Provide work skill instruction
Transport	TLIA1807C	Organise despatch operations