CPPPMT3005 Manage pests without applying pesticides

Release: 1

CPPPMT3005 Manage pests without applying pesticides

Modification History

Release 1.

Replaces superseded equivalent CPPPMT3005A Modify environment to manage pests.

This version first released with CPP Property Services Training Package Version 2.

Application

This unit of competency specifies the outcomes required to adapt or create physical conditions in the site environment to manage non-timber pests. The unit covers assessing the nature and extent of the pest and pest activity, gaining a thorough understanding of client requirements and factors contributing to the pest problem, and then applying company procedures to eliminate food, water and harbourages and block ingress for a range of non-timber pests. The selection of appropriate equipment and methods is essential for performing the task safely and efficiently.

The unit applies to non-timber pests that include ants, cockroaches, rodents and spiders, and to pest activity that may affect the health, safety and amenity of persons or the environment. It can be applied to residential, commercial or industrial premises or sites.

Licensing, legislative, regulatory or certification requirements apply to pest management in some States. Relevant state and territory regulatory authorities should be consulted to confirm those requirements.

Pre-requisite Unit

Nil

Unit Sector

Pest management

Elements and Performance Criteria

Elements describe the essential outcomes.	Performance criteria describe the performance needed to demonstrate achievement of the element. Where bold italicised text is used, further information is detailed in the range of conditions.
1.	Inspect work site and identify pests and pest activity.	1.1.	Work site is accessed and contact with client or nominated representative is established, according to client and company requirements.
1.2.	Work order is reviewed and client requests and issues are clarified with appropriate persons.
1.3.	Inspection method is determined and inspection equipment selected and checked according to work order and client and company requirements.
1.4.	Hazards relating to inspection of work site are identified and risks assessed and controlled according to relevant company and compliance requirements.
1.5.	Site buildings and environment are examined and types of pest, extent of pest activity and potential for pest activity are identified according to work order and company requirements.
2.	Develop pest management plan and discuss with client.	2.1.	Pest management methods are selected according to type and extent of pest and pest activity, potential for pest activity, work order, manufacturer specifications, and relevant company and compliance requirements.
2.2.	Pest management plan is developed according to client, and relevant company and compliance requirements.
2.3.	Client is advised of proposed pest management plan according to work order and company requirements, and questions are invited and responses given.
2.4.	Client approval to proceed with implementation of pest management plan is confirmed according to company requirements.
3.	Prepare work site for pest management	3.1.	Risk assessment is conducted, hazards relating to pest management at the work site are identified, and risk control measures determined according to manufacturer specifications.
3.2.	Size and usage pattern of work site are determined to ensure safety of personnel and efficient use of tools and building components when installing physical controls.
3.3.	Signage and barriers are installed as required to protect public health and safety during pest management activities.
3.4.	Factors affecting completion of work order are identified and appropriate persons are promptly advised.
4.	Select and prepare equipment and materials for implementation of pest management plan.	4.1.	Suitable tools and personal protective equipment (PPE) are selected, accessed and checked for operational effectiveness according to manufacturer specifications, and relevant company and compliance requirements.
4.2.	PPE is adjusted to suit operator’s requirements according to manufacturer specifications.
4.3.	Materials are selected according to risk assessment and pest management plan, and are located and prepared according to manufacturer specifications and company requirements.
5.	Adapt or create physical conditions in work site to manage pests.	5.1.	Work site is modified using tools, equipment, materials and pest management method according to the client-approved pest management plan.
5.2.	Work is conducted using safe operating practices according to manufacturer specifications, and relevant company and compliance requirements.
5.3.	Emergency situations are responded to using emergency response procedures according to manufacturer specifications, and relevant company and compliance requirements.
6.	Finalise work and complete documentation.	6.1.	Equipment, materials and waste are collected and removed from work site according to work order, and relevant company and compliance requirements.
6.2.	Work site is restored according to work order, client requests, and environmental and company requirements.
6.3.	Signage and barriers are removed when work site is available for re-use, according to work order, and relevant company and compliance requirements.
6.4.	Regulatory and company documentation is completed and distributed according to relevant company and compliance requirements.
7.	Clean up.	7.1.	Tools and equipment are cleaned and decontaminated according to manufacturer specifications, and relevant company and compliance requirements.
7.2.	Tools and equipment are safety checked and required maintenance is recorded according to manufacturer specifications, and relevant company and compliance requirements.
7.3.	Cleaned tools and equipment are stored to allow ready access and re-use according to company requirements.
7.4.	Waste that was removed from work site is disposed of according to work order, manufacturer specifications, and relevant company and compliance requirements.
7.5.	Exposed skin is treated to remove any contamination according to manufacturer specifications, and relevant company and compliance requirements.

Foundation Skills

This section describes the language, literacy, numeracy and employment skills essential to performance in this unit but not explicit in the performance criteria.
Skill	Performance feature
Learning skills to:	draw on prior knowledge of pests and pest activity to determine the scope of inspections required at new sites and to select effective pest management methods for the types of pests identified.
Numeracy skills to:	read and interpret numerical data in manufacturer specifications and work order estimate or measure and calculate size of work site and determine volumes of materials required to apply physical pest management controls.
Oral communication skills to:	confirm understanding of client’s pest problem and related requests and issues using strategies, including questioning and summarising propose and discuss with clients cultural control aspects of pest management plan, including pest-prevention strategies relating to cleaning and waste management that can be implemented by the client.
Reading skills to:	read and interpret directions and safety instructions in equipment manuals, manufacturer specifications and work orders.
Writing skills to:	prepare client information, including invoice for completed work where required record information on regulatory and workplace documentation, such as equipment maintenance records.
Planning and organising skills to:	plan and organise inspection and pest management activities, including identifying risks and accessing relevant resources such as manufacturer specifications.

Range of Conditions

This section specifies work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Bold italicised wording, if used in the performance criteria, is detailed below.
Work site must include either:	residential premises with different types of construction, or commercial premises with different uses, or a combination of the above.
Appropriate persons must include one or more of the following:	clients colleagues managers persons in control of work site supervisors.
Inspection equipment must include:	camera ladder magnifying glass mirror portable lighting or torch probe specimen bottles.
Hazards to be checked for must include:	animal bites and stings audible alarms chemicals confined or restricted spaces electrical environmental contamination fire guard dogs hazards affecting native species lighting manual handling moving vehicles and machinery noise remote locations residual pesticides and other chemicals respiratory slips and trips temperature ultraviolet (UV) radiation working at heights.
Compliance requirements must include:	Australian standards, quality assurance and certification requirements relating to pest management industry guides, advisory standards and codes of practice relating to pest management commonwealth, state and territory legislation and local government regulations relating to pest management, including those relating to: chemical registers and manifests chemical usage consumer protection dangerous goods privacy licensing requirements for pest management public health and safety environmental protection, including waste handling and disposal work health and safety requirements relating to pest management, including: injury, dangerous occurrence and incident reporting procedures for hazard identification, risk assessment and hazard control, including hierarchy of hazard control manual handling requirements of national registration authority and state government authorities site inductions and client safety requirements use of safe work methods.
Types of pests must include species identification of:	ants cockroaches rodents spiders.
Extent of pest activity must include:	factors contributing to pest activity scope and degree of activity or infestation source of pest activity.
Pest management methods must include:	cultural controls physical controls.
Pest management plan must include:	advice on health, safety, environmental and other legislative matters advice on pest prevention strategies details of pest and pest activity and potential for pest activity follow-up pest management advice, monitoring and call-back schedule mandatory notification requirements pest management methods risk management plan.
Signage and barriers must include one or more of the following:	physical barriers and restraints erected to restrict access to work site signs that warn of danger or adverse conditions in compliance with legislative requirements or Australian standards.
Personal protective equipment must include:	appropriate eye, ear and respiratory protection first aid kit appropriate to the task and location site-specific PPE and clothing requirements soap and towel sun protection.
Emergency response procedures must include one of more of the following:	calling emergency numbers cleaning up isolating hazards notifying authorities.

Unit Mapping Information

CPPPMT3005A Modify environment to manage pests

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.education.gov.au/Pages/TrainingDocs.aspx?q=6f3f9672-30e8-4835-b348-205dfcf13d9b