AVIY0056 Control aeroplane in normal flight

Release: 1

AVIY0056 Control aeroplane in normal flight

Modification History

Release 1. This is the first release of this unit of competency in the AVI Aviation Training Package.

Application

This unit involves the skills and knowledge required to control an aeroplane in normal flight in compliance with relevant regulatory requirements of the Civil Aviation Safety Authority (CASA) and national operating standards. It includes climbing an aeroplane, maintaining straight and level flight, descending an aeroplane and turning an aeroplane. It also includes controlling an aeroplane at slow speed, performing circuits and approaches, and complying with airspace requirements. This unit addresses aviation technical skill requirements (physical, mental and task-management abilities) related to aircraft operational duties of flight crew and contributes to safe and effective performance in complex aviation operational environments. Operations are conducted as part of recreational, commercial and military aircraft activities across a variety of operational contexts within the Australian aviation industry. Work is performed independently or under limited supervision within a single-pilot or multi-crew environment. Licensing, legislative, regulatory or certification requirements are applicable to this unit.

Pre-requisite Unit

Not applicable.

Competency Field

Y – Aircraft Operation and Traffic Management

Unit Sector

Not applicable.

Elements and Performance Criteria

ELEMENTS	PERFORMANCE CRITERIA
Elements describe the essential outcomes.	Performance criteria describe the performance needed to demonstrate achievement of the element.
1	Climb aeroplane	1.1	Adjustments are made to attitude and power to achieve an increase of altitude at normal, maximum rate (VY), maximum angle (VX) and cruise conditions of flight during straight and turning manoeuvres
1.2	Aeroplane is maintained in balanced flight and trimmed
1.3	Aeroplane is levelled off from climb at nominated altitude using standard aeroplane procedures
1.4	Flightpath clearance is ensured
1.5	Climb checks are completed
1.6	Air traffic control (ATC) altitude restrictions are observed
2	Maintain straight and level flight	2.1	Power, attitude and configuration are set to achieve straight and level flight
2.2	Aeroplane is maintained in balanced flight and trimmed
2.3	Altitude and heading are maintained within tolerances
2.4	Flightpath clearance is ensured
3	Descend aeroplane	3.1	Power, attitude and configuration are set to achieve descent during glide, power-assisted flight and approach profiles
3.2	Aeroplane is maintained in balanced flight and trimmed
3.3	Aeroplane is levelled from a descent at a nominated altitude
3.4	Flightpath clearance is ensured
3.5	ATC altitude restrictions are observed
3.6	Aeroplane operating limits are not exceeded during descent
3.7	Effects of undercarriage and flaps are managed
3.8	Descent checks are completed
4	Turn aeroplane	4.1	Airspace cleared procedure is carried out
4.2	Heading is altered in balanced flight during level, climbing, descending and gliding manoeuvres and turns are performed at varying rates to achieve specified tracks
4.3	Turn on to nominated heading or geographical feature is achieved
4.4	Aeroplane operating limits are maintained during turns
5	Control aeroplane at slow speed	5.1	Pre-manoeuvre checks are completed in accordance with operating procedures
5.2	Aeroplane is flown at minimum clean approach speed and at minimum landing configuration approach speed as specified in aircraft flight manual (AFM)/pilot’s operating handbook (POH) in balanced flight
5.3	Height awareness is maintained during slow speed flight
5.4	Positive control responses are implemented and reduced control effectiveness recognised during slow flight manoeuvres
5.5	Stall warnings, cautions and indications are monitored during slow speed flight
5.6	Recovery to cruise speed is achieved while maintaining height
6	Perform circuits and approaches	6.1	Traffic patterns are conducted in accordance with aeronautical information package (AIP) procedures appropriate to the aeroplane type with allowance for wind velocity on all legs of the circuit
6.2	All checklists are completed and radiotelephone procedures followed
6.3	Approach path is appropriately intercepted and maintained in a manner applicable to aeroplane type, while remaining clear of other traffic
6.4	Traffic conflict or adverse flight conditions are recognised when they arise and a go-around is performed from any position in the traffic pattern
6.5	Right-of-way rules are applied and complied with
6.6	Radio listening watch is maintained in accordance with established procedures
6.7	Aeroplane is configured for landing
7	Comply with airspace requirements	7.1	While aeroplane is maintained within a specified area, compliance is maintained with air traffic requirements and restricted, controlled and other appropriately designated airspace
7.2	Appropriate reactions are made to factors that may affect the safe progress of the flight
7.3	Awareness of aeroplane position is maintained using charts and geographical features
7.4	Radio listening watch is maintained in accordance with established procedures
7.5	Weather conditions are monitored and appropriate action taken
7.6	Local and published noise abatement requirements and curfews are observed

Foundation Skills

Foundation skills essential to performance are explicit in the performance criteria of this unit of competency.

Range of Conditions

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Unit Mapping Information

This unit replaces and is equivalent to AVIY4003 Control aeroplane in normal flight.

Links

AVI Training Package Companion Volume Implementation Guide available on VET Net: - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=4725260a-0af3-4daf-912b-ef1c2f3e5816