Assessment Requirements for AURVTT004 Trim vehicle components

Release: 1

Assessment Requirements for AURVTT004 Trim vehicle components

Modification History

Release	Comment
Release 1	New unit of competency.

Performance Evidence

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

manufacture and attach two different trim components.

Knowledge Evidence

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to trimming vehicle components, including procedures for:

selecting and using personal protective equipment (PPE)

using safety data sheets (SDS) for trim materials

using specialist tools and equipment

manual handling techniques

environmental requirements, including procedures for storing and disposing of waste materials

types and uses of trimming materials, including detection of faults and repair defects

types and uses of specialist tools and equipment needed to manufacture and attach trim components

techniques and procedures for trimming components, including:

measuring, marking and cutting

sewing techniques

trim removal and replacement

trim cleaning

procedures for protecting vehicle and components when trimming components

procedures for final inspection of trimmed component.

Assessment Conditions

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of tasks.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the vehicle components that they have trimmed, e.g. work orders.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

automotive or marine trimming workplace or simulated workplace

workplace instructions

PPE required to trim components

SDS for trim materials

vehicle or components for trimming

tools, equipment and materials appropriate for trimming vehicle components.

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b4278d82-d487-4070-a8c4-78045ec695b1

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=b4278d82-d487-4070-a8c4-78045ec695b1