Assessment Requirements for AURVTP023 Apply clear over base two-pack refinishing materials to vehicle body components

Release: 1

Assessment Requirements for AURVTP023 Apply clear over base two-pack refinishing materials to vehicle body components

Modification History

Release	Comment
Release 1	New unit of competency.

Performance Evidence

Before competency can be determined, individuals must demonstrate they can perform the following according to the standard defined in this unit’s elements, performance criteria, range of conditions and foundation skills:

mix and apply clear over base (COB) two-pack refinishing materials to three different vehicles, including two of the following vehicle body components:

single vehicle panel

full vehicle side

vehicle front end or rear end.

Knowledge Evidence

Individuals must be able to demonstrate knowledge of:

work health and safety (WHS) and occupational health and safety (OHS) requirements relating to applying clear over base two-pack refinishing materials to vehicle body components, including procedures for:

selecting and using personal protective equipment (PPE)

using technical data sheets (TDS) and safety data sheets (SDS) for COB two-pack paint

handling and storing paint materials

using tools and equipment

using approved drying area

environmental requirements, including procedures for trapping, storing and disposing of waste materials

vehicle paint specifications

types and application of automotive paint, including correct use of positive air feed masks

mixing and application techniques for COB two-pack materials, including:

paint mixing techniques and systems

visual colour matching techniques and use of colour test cards

paint fault identification and rectification methods for COB two-pack refinishing materials

types and use of paint colour matching equipment, including:

mixing system set-up and operation

set-up, operation and maintenance of spray guns

paint drying equipment

paint cleaning materials and equipment

procedures for protecting vehicle and components when applying refinishing materials

procedures for final inspection of completed COB two-pack application.

Assessment Conditions

Assessors must satisfy NVR/AQTF assessor requirements.

Competency is to be assessed in the workplace or a simulated environment that accurately reflects performance in a real workplace setting.

Assessment must include direct observation of task.

Where assessment of competency includes third-party evidence, individuals must provide evidence that links them to the COB two-pack materials they have applied to vehicle body components, e.g. repair orders.

Assessors must verify performance evidence through questioning on skills and knowledge to ensure correct interpretation and application.

The following resources must be made available:

automotive repair workplace or simulated workplace

workplace instructions

paint and vehicle manufacturer specifications and paint codes

TDS and SDS for COB two-pack paint

PPE, including positive air feed masks

COB refinishing materials

three different vehicles with body components specified in the performance evidence requiring painting with COB two-pack refinishing materials

tools, equipment and materials appropriate for applying COB two-pack refinishing materials.

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.education.gov.au/Pages/TrainingDocs.aspx?q=b4278d82-d487-4070-a8c4-78045ec695b1

Companion Volume implementation guides are found in VETNet - https://vetnet.education.gov.au/Pages/TrainingDocs.aspx?q=b4278d82-d487-4070-a8c4-78045ec695b1