Assessment Requirements for AMPA405 Develop and implement Quality Assurance program for a rendering plant

Release: 1

Assessment Requirements for AMPA405 Develop and implement Quality Assurance program for a rendering plant

Modification History

Release	TP Version	Comment
1	AMPv1.0	Initial release

Performance Evidence

Evidence must demonstrate the candidate’s consistency of performance over time at production speed.

Candidates must be able to develop and implement a QA program that meet the requirements of current Australian Standards and relevant legislation.

The candidate must:

develop an implementation plan

develop and document work instructions and Standard Operating Procedures (SOPs)

establish and validate critical limits

explain the process flow chart for the rendering operation

form, instruct and lead a Hazard Analysis Critical Control Point (HACCP) team

identify and observe workplace health and safety requirements

identify and manage environmental hazards

identify corrective action

identify CCPs for QA monitoring

identify hazards

implement the QA program

mentor staff implementing the procedures

prepare a HACCP chart for rendering operations

use relevant communication skills

verify the program using sampling, testing and auditing

Knowledge Evidence

The candidate must demonstrate a broad factual, technical and theoretical knowledge of:

verification and validation procedures

regulations, standards and workplace requirements affecting rendering operations

Assessment Conditions

Assessment can be conducted in actual or simulated environments.

The following three forms of assessment must be used:

written test or quiz

workplace referee report

on the job assessment with assessor observation

Assessors must satisfy current standards for RTOs.

Links

Companion Volume implementation guides are found in VETNet - https://vetnet.gov.au/Pages/TrainingDocs.aspx?q=5e2e56b7-698f-4822-84bb-25adbb8443a7